Your Store

Woodcraft of Toledo

Image of Woodcraft of Toledo

Contact Us

Phone:
419-389-0560
Fax:
419-389-0575
Email:
toledo@woodcraft.com

5311 Airport Highway
Toledo, OH 43615
USA

Retail Store Pricing May Vary from Internet or Catalog Pricing

Hours of Operation

sunday 11am-4pm
monday 9am - 7pm
tuesday 9am - 7pm
wednesday 9am - 7pm
thursday 9am - 7pm
friday 9am - 7pm
saturday 9am - 5pm

Connect with Us


NEW CLASS: Turning A Ice Cream Scoop Handle with: John Conklin
Closed

Tuesday, September 28, 6 PM - 8 PM

Prerequisite: Intro To Lathes And Turning, Face Shield (will Be Provided Or Students Can Bring Their Own)
Tools Required: Safety Glasses, Mask Or Face Covering Is Required.
Description: Advance your turning skills, and take home a beautiful, useful Ice Cream scoop . This class will demonstrate how to properly secure your work and turn a great looking handle for your very own Ice Screen scoop. Additionally, some basic finishing techniques will introduced. These scoops make great gifts for all occasions, so once armed with these skills you will be passing them out in no time! Safety glasses, Mask or face covering is required. Class size is limited. This class will be cancelled one week in advance if not enough students have signed up.
Tuition: $75.00
Tuition Notes: $40 Instruction, $35 Materials

Call 419-389-0560 To Sign Up

Router & Router Table Basics with: Dallis Marsh
Closed

Thursday, September 30, 5 PM - 8 PM

Tools Required: Safety Glasses, Mask Or Face Covering Is Required.
Description: Students will learn how routers can help improve their woodworking. You will learn the different types of routers and how they are used and the differences in using a hand-held router vs using a router in a router table. How to choose the right accessories and the right bits will also be covered and you will leave this class with the confidence to use the router for your future projects. Safety glasses, Mask or face covering is required. Class size is limited. This class will be cancelled one week in advance if not enough students have signed up.
Tuition: $60.00

Call 419-389-0560 To Sign Up

Chip Carving 101: Introduction To Chip Carving with: Danielle Dremann
All

Sunday, October 3, 12 PM - 3 PM

Tools Required: Safety Glasses, Mask Or Face Covering Is Required.
Description: This class is a pre-requisite for all Chip carving classes. In this class, you will be introduced to chip carving safety, the tools used, sharpening, wood choice, recommendations on board layouts, and resources on the craft. You'll be shown how to remove three-sided chips on a prepared pattern board to develop the rudimentary techniques needed to chip carve. The goal of this class is to leave with a comprehensive understanding of basic chip carving which will allow you to expand to more intricate projects in the future. You can either bring your own tools from home or purchase the tools at the beginning of class for a 10% class discount. The wood will be supplied by Woodcraft. On completion of this class you will also receive a complimentary book on Chip Carving. Safety glasses, Mask or face covering is required. Class size is limited. This class will be cancelled one week in advance if not enough students have signed up.
Tuition: $85.00
Tuition Notes: ($25 Materials, $60 Instruction)

Call 419-389-0560 To Sign Up

Introduction To Lathes And Turning with: John Heslop
Beginner

Tuesday, October 5, 4 PM - 8 PM

Tools Required: Safety Glasses, Mask Or Face Covering Is Required.
Description: This class is a pre-requisite for all lathe and turning classes. The first half of the class will be an overview and discussion of the types and structure of the lathe equipment, safe use of the equipment, uses of various accessories, tool selection / options, proper care of tools, and types of wood used in turning. This basic education will apply to various types of turning. The second half of the class will be basic hands-on turning techniques. On completion of this class you will also receive a complimentary book on basic wood turning. Safety glasses, Mask or face covering is required. Class size is limited. This class will be cancelled one week in advance if not enough students have signed up.
Tuition: $105.00
Tuition Notes: $80 Instruction, $25 Materials

Call 419-389-0560 To Sign Up

Date Night At Woodcraft - Pie Server & Ice Cream Scoop with: Rick Bailin & Amy Davis
Full

Friday, October 8, 6 PM - 9 PM

Tools Required: Safety Glasses, Mask Or Face Covering Is Required.
Description: Do you and your significant other want to try something different on "Date Night?" Why not learn basic wood working skills and have fun creating a one of a kind project together? We will provide the food, soft drinks, and materials. You only need to show up and be ready to make some saw dust. Projects will vary from month to month and will consist of small projects such as pens, bottle stoppers, bottle openers, picture holders, wine bottle holders and more. The class will begin with appetizers, refreshments, time to socialize, and project descriptions. The remaining time will be utilized to build the projects and to socialize as a group. This month's project will be a pie server and an ice cream scoop you can show off to your friends. Cost is $150 per couple. Safety glasses, Mask or face covering is required. Class size is limited. This class will be cancelled one week in advance if not enough students have signed up.
Tuition: $150.00
Tuition Notes: $100 Instruction, $50 Materials

Call 419-389-0560 To Sign Up

Demo: Small Project Gifts with: John Conklin
All

Saturday, October 9, 12 AM - 12 AM

Description: Scratching your head thinking of a small project to make as a gift? Have you checked out our small project supplies area for pen kits, knife kits, bottle stoppers, wheels, and so much more? We will spend a bit of time showing you how quickly you can make a beautiful item out of small kits, scrap wood, cut offs, or other items you have. Share your questions!
Tuition: $0.00

Call 419-389-0560 To Sign Up

End Grain Cutting Board with: Carl Kuhnle
Closed

Part 1: Sunday, October 10, 12 PM - 3:30 PM
Part 2: Monday, October 11, 9 AM - 12:30 PM

Prerequisite: Table Saw Basics
Tools Required: Safety Glasses, Mask Or Face Covering Is Required.
Description: Students will build, over the two nights, a 12" x 18" end-grain style cutting board from two contrasting types of wood. This traditional method of building a cutting board makes it VERY durable. It will take cuts from a knife and not show any damage for many years. You will learn all the skills and tips for end-grain cutting and gluing of the wood. You will also learn many valuable machine tips that will help you in many of your woodworking projects. Safety glasses, Mask or face covering is required. Class size is limited. This class will be cancelled one week in advance if not enough students have signed up.
Tuition: $170.00
Tuition Notes: ($135 Instruction, $35 Materials)

Call 419-389-0560 To Sign Up

Ornaments Using Scroll Saw 3D/Compound Cutting with: John Conklin
Intermediate

Thursday, October 14, 5 PM - 8 PM

Tools Required: Safety Glasses, Mask Or Face Covering Is Required.
Description: Compound cutting is a simple technique that produces astonishingly complex-looking results. Discover how easy it is to learn this exciting method for creating three-dimensional ornaments on the scroll saw. In this class we will discuss blades types and how to choose a blade for your project. Other subjects covered will include tensioning, blade control and cutting tips to help you get the best performance from your saw. This intermediate level class requires completion of the beginners class Introduction to scroll saws. Safety glasses, Mask or face covering is required. Class size is limited. This class will be cancelled one week in advance if not enough students have signed up.
Tuition: $65.00
Tuition Notes: ($5 Materials, $60 Instruction)

Call 419-389-0560 To Sign Up

Chip Carving 102: Nothing But Curves with: Danielle Dremann
Intermediate

Sunday, October 17, 12 PM - 3 PM

Prerequisite: Introduction To Chip Carving
Tools Required: Safety Glasses, Mask Or Face Covering Is Required.
Description: This course is a continuation of 'Introduction to Chip Carving' and has been designed to complement the techniques previously achieved (three-sided chips). A refresher on safety and resources on the craft will be given prior to starting new material. This course will focus on curved chips as well as the 'stacking method' - a technique often utilized when carving intricate designs that come to a single point. A practice board with different layouts of these designs will be provided. At the conclusion of this class, you will leave with the skills needed to carve intricate pieces with the stacking method. Each student will be given a small take-home project representing all the techniques demonstrated in combination with techniques achieved in the first course. Safety Glasses, Mask or Face Covering is Required. You will also need to acquire your own chip carving knife and sharpening stone (ceramic recommended)
Tuition: $65.00
Tuition Notes: $10 Materials, $55 Instruction

Call 419-389-0560 To Sign Up

NEW CLASS: Turning a Wallstreet Pen with: Rick Bailin
Intermediate

Monday, October 18, 5 PM - 7 PM

Prerequisite: Introduction to Lathes and Turning
Tools Required: None; All Materials And Equipment Will Be Supplied By Woodcraft
Description: Have you ever wanted a fine writing instrument? Learn the tips and techniques that produce excellent results every time. You will be shown how to cut, drill, square the ends, turn, sand, apply a durable finish quickly, and then assemble the parts. Learn the fundamentals of creating a pen from wood selection, tool selection and proper lathe techniques to finishing. Soon you will be making pens for all your friends. Safety glasses, Mask or face covering is required. Class size is limited. This class will be cancelled one week in advance if not enough students have signed up.
Tuition: $85.00
Tuition Notes: $60 Instruction, $25 Materials/Shop Supplies

Call 419-389-0560 To Sign Up

Introduction To Lathes And Turning with: John Conklin
Beginner

Wednesday, October 20, 9 AM - 1 PM

Tools Required: Safety Glasses, Mask Or Face Covering Is Required.
Description: This class is a pre-requisite for all lathe and turning classes. The first half of the class will be an overview and discussion of the types and structure of the lathe equipment, safe use of the equipment, uses of various accessories, tool selection / options, proper care of tools, and types of wood used in turning. This basic education will apply to various types of turning. The second half of the class will be basic hands-on turning techniques. On completion of this class you will also receive a complimentary book on basic wood turning. Safety glasses, Mask or face covering is required. Class size is limited. This class will be cancelled one week in advance if not enough students have signed up.
Tuition: $105.00
Tuition Notes: $80 Instruction, $25 Materials

Call 419-389-0560 To Sign Up

Relief Carving 101 with: Roger Martin

Thursday, October 21, 5 PM - 7 PM

Tools Required: Safety Glasses, Mask Or Face Covering Is Required.
Description: This class is a continuation of the Introduction to relief carving class, or those who have some experience with mallet and/or palm tools. In this class we will work on carving skills by carving a shallow relief of an oak leaf or simple flower. We will learn the proper use of carving tools, tool sharpening and carving safety. If you have carving tools, bring them with you. If not, we have and few sets we can use in the class. Please don't buy tools for this class. We would like to work with you and advise each of you on the types of tools you will need for future use. Mallet tools are most commonly used but, palm tool is also available as well for smaller carvings. The wood will be supplied by Woodcraft. Safety glasses, Mask or face covering is required. Class size is limited. This class will be cancelled one week in advance if not enough students have signed up.
Tuition: $55.00
Tuition Notes: ($5 Materials, $50 Instruction)

Call 419-389-0560 To Sign Up

Router & Router Table Basics with: Dallis Marsh
Beginner

Sunday, October 24, 12 PM - 3 PM

Tools Required: Safety Glasses, Mask Or Face Covering Is Required.
Description: Students will learn how routers can help improve their woodworking. You will learn the different types of routers and how they are used and the differences in using a hand-held router vs using a router in a router table. How to choose the right accessories and the right bits will also be covered and you will leave this class with the confidence to use the router for your future projects. Safety glasses, Mask or face covering is required. Class size is limited. This class will be cancelled one week in advance if not enough students have signed up.
Tuition: $60.00

Call 419-389-0560 To Sign Up

NEW CLASS: Cabinet Making the Festool Way with: Jerry Bingham
Intermediate

Part 1: Monday, October 25, 9:30 AM - 4:30 PM
Part 2: Tuesday, October 26, 9:30 AM - 2:30 PM

Tools Required: None; All Materials And Equipment Will Be Supplied By Woodcraft
Description: Want to know how Festool can make your next project faster, easier, smarter? Come join Jerry and learn how to build cabinet carcasses using Festool equipment and accessories with streamlined True32 cabinet making techniques. In this two-day hands-on intensive course, you will build a frameless upper cabinet and a face-frame lower cabinet starting with a sheet of plywood and ending up with assembled boxes ready for finish. Instruction will cover a full array of Festool products and accessories: TS 55 plunge saw, MFT3 workbench, Kapex miter saw, Domino loose mortise and tenon joining system, OF1400 Routers + LR32 hole drilling accessory, MFK 700 trim router, Rotex sanders, finish sanders, specialty sanders, and CT dust extractors with HEPA filtration. Whether you already drank the Kool-aid and own every Festool Product or don't own any, this class is for you. No huge shop, table saw or router table required. No prior cabinet making experience necessary. This class will be cancelled one week in advance if we do not have the minimum number of students.
Tuition: $495.00
Tuition Notes: $255 Materials, $240 Instruction

Call 419-389-0560 To Sign Up

NEW CLASS: Table Saw 101 the Basics with: Jim Seifert
Beginner

Thursday, October 28, 5 PM - 7 PM

Tools Required: Safety Glasses, Mask Or Face Covering Is Required.
Description: With a focus on safety, we'll cover set up and maintenance, safe sawing techniques for solid wood and sheet goods, and useful jigs and fixtures for this most common workshop power tool. On completion of this class you will also receive a complimentary book on the Complete Table Saw. Safety glasses, Mask or face covering is required. Class size is limited. This class will be cancelled one week in advance if not enough students have signed up.
Tuition: $65.00
Tuition Notes: $25 Materials, $40 Instruction

Call 419-389-0560 To Sign Up

Dovetail Joints With Porter Cable 4212 Jig with: Jerry Bingham

Monday, November 1, 5 PM - 7 PM

Tools Required: Safety Glasses, Mask Or Face Covering Is Required.
Description: Of the many dovetail systems on the market, the PC 4212 stands out in versatility, ease of use, and cost. With it, drawers, chests, book shelves and any other projects are made with ease. Each student will make a small box while exploring set up, planning, and cutting the joints. Other types of jigs will be discussed presenting the pros and cons of each. Safety glasses, Mask or face covering is required. Class size is limited. This class will be cancelled one week in advance if not enough students have signed up.
Tuition: $65.00
Tuition Notes: ($15 Materials, $50 Instruction)

Call 419-389-0560 To Sign Up

Hand Tool Sharpening with: Dennis Laney
All

Tuesday, November 9, 4 PM - 7 PM

Description: Sharpening is an essential skill when using hand tools. And sharp tools are so much more fun to use! Hone your skills in sharpening plane blades and chisels with bench stones. You will learn a simple, straightforward process to bring an edge tool to peak performance. This class is a prerequisite for the Hand Tool Joinery classes.
Tuition: $65.00
Tuition Notes: $60 Instruction, $5 Materials/Shop Supplies

Call 419-389-0560 To Sign Up

CNC 100: Introduction Seminar To CNC with: Dallis Marsh
All

Thursday, November 11, 4 PM - 8 PM

Tools Required: Safety Glasses, Mask Or Face Covering Is Required.
Description: This is an introductory course to CNC machines and software. Students will learn the basic components of a CNC machine, how to set it up, and fundamentals of the software on how to design and machine a simple sign. Student must bring a laptop with mouse and with Vcarve Desktop Trial or Licensed Version. Safety glasses, Mask or face covering is required. Class size is limited. This class will be cancelled one week in advance if not enough students have signed up.
Tuition: $80.00

Call 419-389-0560 To Sign Up

NEW CLASS: Ladies Night Out: Chip Carving 101: Introduction to Chip Carving with: Danielle Dremann
All

Friday, November 12, 5 PM - 8 PM

Description: Ladies to the front of the line. Here's your chance to show everyone that woodworking is universal and can be fun and educational as well. Learn the basics of woodworking in this women-only class! This class is a pre-requisite for all Chip carving classes. In this class, you will be introduced to chip carving safety, the tools used, sharpening, wood choice, recommendations on board layouts, and resources on the craft. You'll be shown how to remove three-sided chips on a prepared pattern board to develop the rudimentary techniques needed to chip carve. The goal of this class is to leave with a comprehensive understanding of basic chip carving which will allow you to expand to more intricate projects in the future. You can either bring your own tools from home or purchase the tools at the beginning of class for a 10% class discount. The wood will be supplied by Woodcraft. On completion of this class you will also receive a complimentary book on Chip Carving. Safety glasses, Mask or face covering is required. Class size is limited. This class will be cancelled one week in advance if not enough students have signed up.
Tuition: $85.00
Tuition Notes: $60 Instruction, $25 Materials/Shop Supplies

Call 419-389-0560 To Sign Up

Get To Know Your Bandsaw with: Rick Bailin
All

Saturday, November 13, 9 AM - 11 AM

Tools Required: Safety Glasses, Mask Or Face Covering Is Required.
Description: The band saw is a very versatile machine but sometimes requires a bit of coaxing to produce its best performance. In this class, set up adjustments, blade selection and tension, basic maintenance and various cutting techniques will be covered and demonstrated. Also, we will cover jigs, fixtures, and accessories that can make woodworking more accurate, efficient, and enjoyable. Sketches and plans will be provided to students to use with your own equipment at home. Safety glasses, Mask or face covering is required. Class size is limited. This class will be cancelled one week in advance if not enough students have signed up.
Tuition: $40.00

Call 419-389-0560 To Sign Up

Router & Router Table Basics with: Dallis Marsh
Beginner

Monday, November 15, 4 PM - 7 PM

Tools Required: Safety Glasses, Mask Or Face Covering Is Required.
Description: Students will learn how routers can help improve their woodworking. You will learn the different types of routers and how they are used and the differences in using a hand-held router vs using a router in a router table. How to choose the right accessories and the right bits will also be covered and you will leave this class with the confidence to use the router for your future projects. Safety glasses, Mask or face covering is required. Class size is limited. This class will be cancelled one week in advance if not enough students have signed up.
Tuition: $60.00

Call 419-389-0560 To Sign Up

Introduction To Lathes And Turning with: John Conklin
Beginner

Thursday, November 18, 4 PM - 8 PM

Tools Required: Safety Glasses, Mask Or Face Covering Is Required.
Description: This class is a pre-requisite for all lathe and turning classes. The first half of the class will be an overview and discussion of the types and structure of the lathe equipment, safe use of the equipment, uses of various accessories, tool selection / options, proper care of tools, and types of wood used in turning. This basic education will apply to various types of turning. The second half of the class will be basic hands-on turning techniques. On completion of this class you will also receive a complimentary book on basic wood turning. Safety glasses, Mask or face covering is required. Class size is limited. This class will be cancelled one week in advance if not enough students have signed up.
Tuition: $105.00
Tuition Notes: $80 Instruction, $25 Materials

Call 419-389-0560 To Sign Up

Turning Bottle Stopper with: Carl Kuhnle
Intermediate

Sunday, November 21, 12 PM - 3 PM

Prerequisite: Intro To Lathes And Turning, Face Shield (will Be Provided Or Students Can Bring Their Own)
Tools Required: Safety Glasses, Mask Or Face Covering Is Required.
Description: Advance your turning skills, and take home a beautiful, useful bottle stopper. This class will demonstrate how to properly secure your work and turn a great looking stopper. Additionally, some basic finishing techniques will introduced. These stoppers make great gifts for all occasions, so once armed with these skills you will be passing them out in no time! Safety glasses, Mask or face covering is required. Class size is limited. This class will be cancelled one week in advance if not enough students have signed up.
Tuition: $70.00
Tuition Notes: $50 Instruction, $20 Materials

Call 419-389-0560 To Sign Up

NEW CLASS: Youth Class: Pucket game with: John Conklin
All

Sunday, November 28, 12:30 PM - 3 PM

Description: Do you have family game nights or have a kid that enjoys making woodworking projects? Have a great parent/child experience and build a fun, fast paced Pucket game with us. Pucket is a fast action game that's a blast and easy to play. You'll also learn basic woodworking principles and safety practices. Safety glasses, Mask or face covering is required. Class size is limited. This class will be cancelled one week in advance if not enough students have signed up.
Tuition: $50.00
Tuition Notes: $25 Instruction, $25 Materials/Shop Supplies

Call 419-389-0560 To Sign Up

Table Saw 101 the Basics with: Jim Seifert
Beginner

Tuesday, November 30, 5 PM - 7 PM

Tools Required: Safety Glasses, Mask Or Face Covering Is Required.
Description: With a focus on safety, we'll cover set up and maintenance, safe sawing techniques for solid wood and sheet goods, and useful jigs and fixtures for this most common workshop power tool. On completion of this class you will also receive a complimentary book on the Complete Table Saw. Safety glasses, Mask or face covering is required. Class size is limited. This class will be cancelled one week in advance if not enough students have signed up.
Tuition: $65.00
Tuition Notes: $25 Materials, $40 Instruction

Call 419-389-0560 To Sign Up

Router & Router Table Basics with: Dallis Marsh
Beginner

Thursday, December 2, 4 PM - 7 PM

Tools Required: Safety Glasses, Mask Or Face Covering Is Required.
Description: Students will learn how routers can help improve their woodworking. You will learn the different types of routers and how they are used and the differences in using a hand-held router vs using a router in a router table. How to choose the right accessories and the right bits will also be covered and you will leave this class with the confidence to use the router for your future projects. Safety glasses, Mask or face covering is required. Class size is limited. This class will be cancelled one week in advance if not enough students have signed up.
Tuition: $60.00

Call 419-389-0560 To Sign Up

Introduction To Resin Casting with: Rick Bailin
All

Sunday, December 5, 10 AM - 12 PM

Tools Required: Safety Glasses, Mask Or Face Covering Is Required.
Description: In this beginner class we will explain the steps and necessary equipment and products to produce acrylic pen blanks. Using Alumilite Clear Slow and adding dyes or Alumidust, for a unique look, you will produce a one-of-a-kind pen blank, pouring your mix in a form. The final step, to insure there are no bubbles, will be to place your creation in a pressure pot for an overnight cure. Return the next day to take home the beautiful blank you created; then turn it at your leisure on your own lathe. Safety glasses, Mask or face covering is required. Class size is limited. This class will be cancelled one week in advance if not enough students have signed up.
Tuition: $50.00
Tuition Notes: $40 Instruction, $10 Materials

Call 419-389-0560 To Sign Up

Hand Cut Dovetails Class with: Dennis Laney
All

Saturday, December 11, 1 PM - 4 PM

Tools Required: Safety Glasses, Mask Or Face Covering Is Required.
Description: In this class you will learn to make hand cut dovetails which are most often associated with quality workmanship in woodworking. It is most often seen in cabinetry and case work. They are considered one of the strongest types of joints that is used in woodworking. Hand cut dovetails take more time than power tool joinery, but it offers more strength and beauty in the configuration than any power tool can offer. You will learn the pin and tail marking technique of making dovetails using a saw and chisel to create and take home your own sample board of hand cut dovetails. Safety glasses, Mask or face covering is required. Class size is limited. This class will be cancelled one week in advance if not enough students have signed up.
Tuition: $70.00
Tuition Notes: ($10 Materials, $60 Instruction)

Call 419-389-0560 To Sign Up

Introduction To Lathes And Turning with: John Heslop
Beginner

Sunday, December 12, 11 AM - 3 PM

Tools Required: Safety Glasses, Mask Or Face Covering Is Required.
Description: This class is a pre-requisite for all lathe and turning classes. The first half of the class will be an overview and discussion of the types and structure of the lathe equipment, safe use of the equipment, uses of various accessories, tool selection / options, proper care of tools, and types of wood used in turning. This basic education will apply to various types of turning. The second half of the class will be basic hands-on turning techniques. On completion of this class you will also receive a complimentary book on basic wood turning. Safety glasses, Mask or face covering is required. Class size is limited. This class will be cancelled one week in advance if not enough students have signed up.
Tuition: $105.00
Tuition Notes: $80 Instruction, $25 Materials

Call 419-389-0560 To Sign Up

Top of Page