Woodcraft of Tucson

Woodworking Series for Beginners - End Table

Part 1: Thursday, July 17, 10 AM - 4 PM

Part 2: Thursday, July 24, 10 AM - 4 PM

Part 3: Thursday, July 31, 10 AM - 4 PM

Get started in woodworking with this series of classes by building a fine end table. Starting in part 1, you will learn to use hand and power tools, shop safety, selecting wood and preparation. In part 2, you will use cut lists, drawings, measuring, cutting parts to size, panelizing and gluing. In part 3 you will complete final cutting of parts, sanding and prepare for assembly. A discussion of finishing will follow. Eye protection, dust mask, hearing protection required.

Band Saw Basics

Saturday, July 26, 10 AM - 12 PM

A band saw is one of the most versatile tools in a woodworkers shop, but only if it is tuned up correctly. This class will teach you how to do that tune up properly, and how to maintain your band saw for years of reliable service. We will discuss which blade is best for any given situation, and how to use your band saw safely and efficiently when completing various cuts like resawing, cutting curves and compound curves, and when using various jigs.

Introduction To The Lathe--Spindle Turning

Saturday, August 9, 9:30 AM - 4:30 PM

As a beginner or someone who needs a refresher course in woodturning, tool control concepts are extremely important. I will show you why those nasty "catches" happen and how to get good, clean cuts with your tools. Once you grasp these basics, it will be much easier to begin making pens, pepper grinders, bowls, boxes, hollow forms, and any other woodturning project. Instruction will include safety, lathe setup, theory of tool control, sharpening tips, and basic cuts that can be made on spindles. You will have practice creating traditional spindle features with five fundamental turning tools, and each student will work on a project to take home.