Woodcraft of Chattanooga

Kitchen Cabinetmaking 101: Boxes and Frames

Part 1: Saturday, November 14, 2026, 9 AM - 5 PM

Part 2: Sunday, November 15, 2026, 9 AM - 5 PM

Take our Kitchen Cabinetmaking Series to gain the confidence and knowledge necessary to tackle your upcoming cabinet projects! While the focus of this series is on kitchen cabinetmaking, the techniques you’ll learn can easily be applied to many types of cabinetry including bathroom vanities, closets, mudrooms, built-ins, and more. In the first part of this series, students will spend 12+ hours of class time learning about the cabinetmaking process as they build two cabinets to take home. Topics covered include: creating a cut list, processing sheets of plywood, creating case joinery, applying edge banding, drilling shelf pin holes, and making and attaching face frames. Students will complete two cabinet boxes: a base cabinet sized to fit common benchtop tools, and a wall cabinet that can be used for utility or shop storage. Any extra time at the end of the class can be used for preparing surfaces for finish and/or discussing kitchen layout ideas.

Bowl Turning 101

Saturday, November 14, 2026, 10 AM - 5 PM

This class is for those who want to learn how to use the lathe to turn blocks of wood into beautiful bowls! The class will begin with a review of lathe safety before beginning the hands-on portion of selecting and sharpening turning tools, mounting blanks to the lathe, turning and sanding techniques, and applying a food safe finish. Students will leave with a better understanding of wood turning and a completed bowl.

From Log to Bowl

Sunday, November 15, 2026, 10 AM - 5 PM

Students who take this class will learn how to safely process and turn their own bowl blanks, from a rough log all the way through the finished bowl! In addition to practicing turning techniques, some of the topics covered in this class include: processing logs with a chainsaw, prepping blanks on the bandsaw, turning green wood, drying blanks after initial turn, remounting to the lathe, and sanding and applying finishes. Please Note: There is a minimum of two students for this class to make.