Your Store

Woodcraft of Houston North

Image of Woodcraft of Houston North

Contact Us

Phone:
281-880-0045
Email:
houston-retail@woodcraft.com

235 Cypress Creek PKWY Ste A3
Houston, TX 77090
USA

Retail Store Pricing May Vary from Internet or Catalog Pricing

Hours of Operation

sunday 11 AM - 4 PM
monday 9 AM - 6 PM
tuesday 9 AM - 6 PM
wednesday 9 AM - 6 PM
thursday 9 AM - 6 PM
friday 9 AM - 6 PM
saturday 9 AM - 6 PM

Connect with Us


Introduction To Cabinet Making with: Stan Smith
All

Part 1: Saturday, October 2, 9 AM - 6 PM
Part 2: Sunday, October 3, 11 AM - 4 PM

Tools Required: Safety Glasses, Hearing Protection, Tape Measure, Notebook & Pencil
Description: This class will cover the basics of cabinet making and drawer construction. Each student will construct a wall cabinet with a flat panel door, drawer, and adjustable shelf, using dado and rabbet joints, face frame construction and rail and stile milling. Our most popular class and it fills quickly! This is a two-day class.
Tuition: $280.00
Tuition Notes: Tuition Includes Cost Of Materials. Please Call The Store At 281-880-0045 With Any Questions Or To Sign-up.

Click Here to Request Information

Pen Turning: The European with: Don Fluker
All

Thursday, October 7, 6 PM - 9 PM

Tools Required: Eye Protection Glasses And Notepad
Description: Learn to turn the classic European pen from wood. This pen is styled after the classic European Mont Blanc writing instruments. WOW the office by showing off your custom hand-crafted pen.
Tuition: $90.00
Tuition Notes: Tuition Includes Cost Of Materials. Please Call The Store At 281-880-0045 With Any Questions Or To Sign-up.

Click Here to Request Information

Making A Cutting Board with: Danny Wise
Beginner

Saturday, October 9, 9:30 AM - 5 PM

Prerequisite: Basic Knowledge Of Shop Tools Is Helpful But Not Required
Tools Required: Safety Glasses, Hearing Protection, Pencil & Notebook
Description: This classic kitchen accessory has become a staple in today's kitchens. Cutting boards can be simple to make but challenging at the same time. Your finished board will provide a tough cutting surface for years to come. In just 6 short hours you will make a handsome cutting board from hardwoods including maple, cherry and walnut, with a little purple heart accents thrown in. Please help Dan pull together these amazing hardwoods, woodworkers supplies and make an attractive cutting board for you or as a special gift.
Tuition: $135.00
Tuition Notes: Tuition Includes Cost Of Materials. Please Call The Store At 281-880-0045 With Any Questions Or To Sign-up.

Click Here to Request Information

Making An End Table with: Phil Elmore
Intermediate

Part 1: Tuesday, October 12, 6 PM - 9 PM
Part 2: Wednesday, October 13, 6 PM - 9 PM
Part 3: Thursday, October 14, 6 PM - 9 PM

Tools Required: All Tools And Materials Provided
Description: : The selection of furniture for your home stirs different emotions in every person. The "Domino" end table lets you build a quality piece of furniture in a reasonable amount of time and provides a successful and satisfying experience. Every home uses end tables so why not build on your woodworking skills while using Festool's German engineered Domino Joiner. Join Phil as he takes you through the furniture making process. Beyond the simple joinery and striking lines you will construct a solid end table that will surely become a family heirloom.
Tuition: $395.00
Tuition Notes: Tuition Includes Cost Of Materials. Please Call The Store At 281-880-0045 With Any Questions Or To Sign-up.

Click Here to Request Information

Introduction To Bowl Turning with: Eric Novak
All

Saturday, October 16, 9 AM - 6 PM

Prerequisite: No Turning Experience Required
Tools Required: Safety Glasses, Hearing Protection, Pencil & Notebook
Description: Perfect your basic turning skills by learning to turn a wooden bowl. Face plate turning, tool techniques, sanding and finishing will be covered.
Tuition: $120.00
Tuition Notes: Tuition Includes Cost Of Materials. Please Call The Store At 281-880-0045 With Any Questions Or To Sign-up.

Click Here to Request Information

Introduction To Woodworking Machines with: Phil Elmore
Full

Sunday, October 17, 11 AM - 4 PM

Tools Required: Safety Glasses And Hearing Protection
Description: This will be an introduction to the most commonly used tools in the woodworking shop. You will learn to use the tablesaw, mitersaw, jointer, planer, and router. This class will cover basic operation, technique and safety of each of the tools.
Tuition: $120.00
Tuition Notes: Tuition Includes Cost Of Materials. Please Call The Store At 281-880-0045 With Any Questions Or To Sign-up.

Click Here to Request Information

Basic Router Class with: Phil Elmore
Canceled

Sunday, October 17, 11 AM - 4 PM

Tools Required: Tape Measure, Square, Pencil & Safety Glasses
Description: An introductory class designed to familiarize students with the different types of routers, components and safety precautions. Router bit types, sizes and uses will be discussed as well as the three types of cuts that can be made. Students will make a simple project using only the router. Bring in your router and Phil will also show you how to use it.
Tuition: $120.00
Tuition Notes: Tuition Includes Cost Of Materials. Please Call The Store At 281-880-0045 With Any Questions Or To Sign-up.

Click Here to Request Information

Create Your Own Epoxy Resin River Table Or Art Piece with: Phil Elmore
All

Part 1: Tuesday, October 19, 5 PM - 9 PM
Part 2: Wednesday, October 20, 5 PM - 9 PM

Tools Required: Safety Glasses, Hearing Protection, Pencil & Notebook
Description: Over the two day course, students will gain the knowledge, experience & confidence of how to properly use the Alumilite epoxy resin and System three products. You will learn how to properly measure, mix & pour the Alumilite epoxy resin to achieve the desired results that you can then carry forward with you to work on your own epoxy projects big and small! Upon conclusion, you will have made your very own epoxy and wood river piece that can be used as a mini replica table-top, serving tray or art piece!
Tuition: $300.00
Tuition Notes: Tuition Includes Cost Of Materials. Please Call The Store At 281-880-0045 With Any Questions Or To Sign-up.

Click Here to Request Information

Adirondack Chair with: Shaye McGee
All

Part 1: Saturday, October 23, 9 AM - 6 PM
Part 2: Sunday, October 24, 11 AM - 4 PM

Prerequisite: None!
Tools Required: Eye Protection Glasses And Notepad
Description: Join Shaye as he helps you build a VERY comfortable chair to relax and enjoy the special cool Texas evenings. Weather proof wood is used to construct this comfortable outdoor easy chair.
Tuition: $300.00
Tuition Notes: Materials included in cost

Click Here to Request Information

Hollowing A Small Neck Vase with: Eric Novak
All

Saturday, October 30, 9 AM - 6 PM

Prerequisite: Basic Turning Skills Preferred
Description: You'll l learn the turning skill of hollowing out a vessel though a narrow neck opening. You will start by turning the exterior of your vessel, and then use special hollowing tools to shape the vessel from the inside. Eric will guide you through this process and give tips on how to create even walls and prevent tear-out. Your objet d'art will amaze your friends.
Tuition: $145.00

Click Here to Request Information

Introduction To CNC with: Mark Giles
All

Sunday, October 31, 11 AM - 3:30 AM

Prerequisite: Basic Skills With Computers And Computer Applications.
Description: This class is designed for anyone thinking about getting started with CNC. This class provides an overview of the steps needed to take a project from concept to completion. Your instructor will provide guidance on selecting a CNC, discuss design software choices, demonstrate how to create the design, generate the 'toolpaths' and save the machine file. Next, you'll get hands on designing a custom sign and carving it using a CNC.
Tuition: $100.00
Tuition Notes: Tuition Includes Cost Of Materials. Please Call The Store At 281-880-0045 With Any Questions Or To Sign-up.

Click Here to Request Information

Pen Turning: The European with: Don Fluker
All

Thursday, November 4, 6 PM - 9 PM

Tools Required: Eye Protection Glasses And Notepad
Description: Learn to turn the classic European pen from wood. This pen is styled after the classic European Mont Blanc writing instruments. WOW the office by showing off your custom hand-crafted pen.
Tuition: $90.00
Tuition Notes: Tuition Includes Cost Of Materials. Please Call The Store At 281-880-0045 With Any Questions Or To Sign-up.

Click Here to Request Information

Introduction To Cabinet Making with: Stan Smith
All

Part 1: Saturday, November 6, 9 AM - 6 PM
Part 2: Sunday, November 7, 11 AM - 4 PM

Tools Required: Safety Glasses, Hearing Protection, Tape Measure, Notebook & Pencil
Description: This class will cover the basics of cabinet making and drawer construction. Each student will construct a wall cabinet with a flat panel door, drawer, and adjustable shelf, using dado and rabbet joints, face frame construction and rail and stile milling. Our most popular class and it fills quickly! This is a two-day class.
Tuition: $280.00
Tuition Notes: Tuition Includes Cost Of Materials. Please Call The Store At 281-880-0045 With Any Questions Or To Sign-up.

Click Here to Request Information

Make A Kitchen Face Framed Cabinet with: Eric Novak
All

Part 1: Monday, November 8, 6 PM - 9 PM
Part 2: Monday, November 15, 6 PM - 9 PM
Part 3: Monday, November 22, 6 PM - 9 PM
Part 4: Monday, November 29, 6 PM - 9 PM
Part 5: Monday, December 6, 6 PM - 9 PM
Part 6: Monday, December 13, 6 PM - 9 PM
Part 7: Monday, December 20, 6 PM - 9 PM

Prerequisite: Completing Introduction To Woodworking Machines Class Or Equivalent Experience Required. The Book "Illustrated Cabinetmaking" Is Recommended Reading (Item #840021).
Tools Required: Mask, Notebook, Eye And Hearing Protection.
Description: Sometime during everyone's woodworking life you will either have a request or your own personal need to build a cabinet. It's rare to find a seasoned woodworker who hasn't built a cabinet. Join Eric as he shows you how to take some plywood, hardwood and a couple of hardware pieces and turn it into a functional, stylish cabinet addition for your shop or kitchen. From selecting materials, planning a cut list, construction and assembly, Eric will walk you through all facets of cabinetmaking. He'll show you how to make the case from plywood, the face frame with hardwood using pocket holes, a rabbet locked drawer and a raised panel door. You'll learn to fit the drawer with drawer slides and to fit the door using European style hinges. Be prepared to transport a cabinet that is 15 inches wide, 24 inches deep and 35 inches tall home with you. Now's your chance to add cabinets to your woodworking arsenal. This is one of our most popular classes so sign up early!
Tuition: $395.00
Tuition Notes: All Supplies And Materials Are Included In The Tuition.

Click Here to Request Information

Hinged Keepsake Box with: Eric Novak

Part 1: Tuesday, November 9, 5:30 PM - 9 PM
Part 2: Wednesday, November 10, 5:30 PM - 9 PM

Prerequisite: The ‘Introduction To Woodworking Machines’ Or Equivalent Knowledge Is Recommended.
Tools Required: Safety Glasses, Hearing Protection, Pencil & Notebook
Description: Using beautiful contrasting and complimentary woods, you will gain valuable woodworking skills building a gorgeous, hinged keepsake box. A successful box requires solid joinery, precisely installed hinges, and great design. Your woodworking skill set will be enhanced by milling on the planer and jointer, making box joints joinery on the table saw and shaping with the router. Eric will assist you as you tackle each step! In the end, not only will you have a handmade box, but also the skills to expand and create your own interesting designs. This class makes a wonderful gift to those beginner woodworkers looking to solidify fundamental skills
Tuition: $160.00
Tuition Notes: Tuition Includes Cost Of Materials. Please Call The Store At 281-880-0045 With Any Questions Or To Sign-up.

Click Here to Request Information

Acrylic Pen Turning with: Don Fluker
Intermediate

Thursday, November 11, 6 PM - 9 PM

Prerequisite: Some Pen Turning Experience Recommended
Description: Now that you have experienced turning wooden pens, expand your skills by learning how to turn the Wallstreet II Acrylic Pen. This class will allow the student to take home a beautiful acrylic pen which you will make in this class.
Tuition: $95.00
Tuition Notes: Tuition Includes Cost Of Materials. Please Call The Store At 281-880-0045 With Any Questions Or To Sign-up.

Click Here to Request Information

Introduction To Bowl Turning with: Eric Novak
All

Saturday, November 13, 9 AM - 6 PM

Prerequisite: No Turning Experience Required
Tools Required: Safety Glasses, Hearing Protection, Pencil & Notebook
Description: Perfect your basic turning skills by learning to turn a wooden bowl. Face plate turning, tool techniques, sanding and finishing will be covered.
Tuition: $120.00
Tuition Notes: Tuition Includes Cost Of Materials. Please Call The Store At 281-880-0045 With Any Questions Or To Sign-up.

Click Here to Request Information

Introduction To Woodworking Machines with: Phil Elmore
Full

Sunday, November 14, 11 AM - 4 PM

Tools Required: Safety Glasses And Hearing Protection
Description: This will be an introduction to the most commonly used tools in the woodworking shop. You will learn to use the tablesaw, mitersaw, jointer, planer, and router. This class will cover basic operation, technique and safety of each of the tools.
Tuition: $120.00
Tuition Notes: Tuition Includes Cost Of Materials. Please Call The Store At 281-880-0045 With Any Questions Or To Sign-up.

Click Here to Request Information

Create Your Own Epoxy Resin River Table Or Art Piece with: Phil Elmore
All

Part 1: Tuesday, November 16, 5 PM - 9 PM
Part 2: Wednesday, November 17, 5 PM - 9 PM

Tools Required: Safety Glasses, Hearing Protection, Pencil & Notebook
Description: Over the two day course, students will gain the knowledge, experience & confidence of how to properly use the Alumilite epoxy resin and System three products. You will learn how to properly measure, mix & pour the Alumilite epoxy resin to achieve the desired results that you can then carry forward with you to work on your own epoxy projects big and small! Upon conclusion, you will have made your very own epoxy and wood river piece that can be used as a mini replica table-top, serving tray or art piece!
Tuition: $300.00
Tuition Notes: Tuition Includes Cost Of Materials. Please Call The Store At 281-880-0045 With Any Questions Or To Sign-up.

Click Here to Request Information

Turn A Hollow Christmas Ornament with: Don Fluker
All

Thursday, November 18, 6 PM - 9 PM

Tools Required: Eye Protection Glasses And Notepad
Description: Learn to turn a hanging Christmas ornament just in time for Christmas. Our expert turner, Don Fluker, will take you step by step in turning this beautiful and special ornament. We hang one on our store Christmas tree! This is a once a year special class. Enroll early!
Tuition: $95.00
Tuition Notes: Tuition Includes Cost Of Materials. Please Call The Store At 281-880-0045 With Any Questions Or To Sign-up.

Click Here to Request Information

Making A Cutting Board with: Danny Wise
Beginner

Saturday, November 20, 9:30 AM - 5 PM

Prerequisite: Basic Knowledge Of Shop Tools Is Helpful But Not Required
Tools Required: Safety Glasses, Hearing Protection, Pencil & Notebook
Description: This classic kitchen accessory has become a staple in today's kitchens. Cutting boards can be simple to make but challenging at the same time. Your finished board will provide a tough cutting surface for years to come. In just 6 short hours you will make a handsome cutting board from hardwoods including maple, cherry and walnut, with a little purple heart accents thrown in. Please help Dan pull together these amazing hardwoods, woodworkers supplies and make an attractive cutting board for you or as a special gift.
Tuition: $135.00
Tuition Notes: Tuition Includes Cost Of Materials. Please Call The Store At 281-880-0045 With Any Questions Or To Sign-up.

Click Here to Request Information

Essential HandTools: Handcut Dove Tails with: Shaye McGee
Intermediate

Sunday, November 21, 11 AM - 4 AM

Tools Required: Dovetail Saw, Pencil, Chisels & Jewelers Saw
Description: Learn how to layout and cut dovetails using the traditional process instructor Shaye has learned in his years studying hand tool workmanship. A popular class, so be sure to sign up early as he only takes four students for this class. You will be proud of your newly obtained skill.
Tuition: $115.00
Tuition Notes: Tuition Includes Cost Of Materials. Please Call The Store At 281-880-0045 With Any Questions Or To Sign-up.

Click Here to Request Information

Turned Lidded Box with: Eric Novak
All

Saturday, November 27, 9 AM - 6 PM

Prerequisite: Some Turning Experience Preferred.
Tools Required: Mask, Notebook, Eye And Hearing Protection.
Description: The classic look of a turned box with a fitted lid can be yours if you join Eric in this class. The precision of making this box will increase your turning skills, they are fun to make and appreciated by many.
Tuition: $145.00

Click Here to Request Information

Essential Handtools: The Handplane with: Mark Giles
All

Sunday, November 28, 9 AM - 1 AM

Description: You will learn to use a range of handplanes to complement and enhance your skills. This class will focus on selection, set up, sharpening and usage of planes. You will use a variety handplanes learning how to get that glassy smooth finish, fine tune a joint and add decorative details to your work. This course is for those new to handplanes or those wanting to get more from their own planes
Tuition: $90.00
Tuition Notes: Please Call The Store At 281-880-0045 With Any Questions Or To Sign-up.

Click Here to Request Information

Pen Turning: The European with: Don Fluker
All

Thursday, December 2, 6 PM - 9 PM

Tools Required: Eye Protection Glasses And Notepad
Description: Learn to turn the classic European pen from wood. This pen is styled after the classic European Mont Blanc writing instruments. WOW the office by showing off your custom hand-crafted pen.
Tuition: $90.00
Tuition Notes: Tuition Includes Cost Of Materials. Please Call The Store At 281-880-0045 With Any Questions Or To Sign-up.

Click Here to Request Information

Introduction To Cabinet Making with: Stan Smith
All

Part 1: Saturday, December 4, 9 AM - 6 PM
Part 2: Sunday, December 5, 11 AM - 4 PM

Tools Required: Safety Glasses, Hearing Protection, Tape Measure, Notebook & Pencil
Description: This class will cover the basics of cabinet making and drawer construction. Each student will construct a wall cabinet with a flat panel door, drawer, and adjustable shelf, using dado and rabbet joints, face frame construction and rail and stile milling. Our most popular class and it fills quickly! This is a two-day class.
Tuition: $280.00
Tuition Notes: Tuition Includes Cost Of Materials. Please Call The Store At 281-880-0045 With Any Questions Or To Sign-up.

Click Here to Request Information

Turn A Hollow Christmas Ornament with: Don Fluker
All

Thursday, December 9, 6 PM - 9 PM

Tools Required: Eye Protection Glasses And Notepad
Description: Learn to turn a hanging Christmas ornament just in time for Christmas. Our expert turner, Don Fluker, will take you step by step in turning this beautiful and special ornament. We hang one on our store Christmas tree! This is a once a year special class. Enroll early!
Tuition: $95.00
Tuition Notes: Tuition Includes Cost Of Materials. Please Call The Store At 281-880-0045 With Any Questions Or To Sign-up.

Click Here to Request Information

Introduction To Bowl Turning with: Eric Novak
All

Saturday, December 11, 9 AM - 6 PM

Prerequisite: No Turning Experience Required
Tools Required: Safety Glasses, Hearing Protection, Pencil & Notebook
Description: Perfect your basic turning skills by learning to turn a wooden bowl. Face plate turning, tool techniques, sanding and finishing will be covered.
Tuition: $120.00
Tuition Notes: Tuition Includes Cost Of Materials. Please Call The Store At 281-880-0045 With Any Questions Or To Sign-up.

Click Here to Request Information

Introduction To Woodworking Machines with: Phil Elmore
All

Sunday, December 12, 11 AM - 4 PM

Tools Required: Safety Glasses And Hearing Protection
Description: This will be an introduction to the most commonly used tools in the woodworking shop. You will learn to use the tablesaw, mitersaw, jointer, planer, and router. This class will cover basic operation, technique and safety of each of the tools.
Tuition: $120.00
Tuition Notes: Tuition Includes Cost Of Materials. Please Call The Store At 281-880-0045 With Any Questions Or To Sign-up.

Click Here to Request Information

Create Your Own Epoxy Resin River Table Or Art Piece with: Phil Elmore
All

Part 1: Tuesday, December 14, 5 PM - 9 PM
Part 2: Wednesday, December 15, 5 PM - 9 PM

Tools Required: Safety Glasses, Hearing Protection, Pencil & Notebook
Description: Over the two day course, students will gain the knowledge, experience & confidence of how to properly use the Alumilite epoxy resin and System three products. You will learn how to properly measure, mix & pour the Alumilite epoxy resin to achieve the desired results that you can then carry forward with you to work on your own epoxy projects big and small! Upon conclusion, you will have made your very own epoxy and wood river piece that can be used as a mini replica table-top, serving tray or art piece!
Tuition: $300.00
Tuition Notes: Tuition Includes Cost Of Materials. Please Call The Store At 281-880-0045 With Any Questions Or To Sign-up.

Click Here to Request Information

Making A Cutting Board with: Danny Wise
Beginner

Saturday, December 18, 9:30 AM - 4:30 PM

Prerequisite: Basic Knowledge Of Shop Tools Is Helpful But Not Required
Tools Required: Safety Glasses, Hearing Protection, Pencil & Notebook
Description: This classic kitchen accessory has become a staple in today's kitchens. Cutting boards can be simple to make but challenging at the same time. Your finished board will provide a tough cutting surface for years to come. In just 6 short hours you will make a handsome cutting board from hardwoods including maple, cherry and walnut, with a little purple heart accents thrown in. Please help Dan pull together these amazing hardwoods, woodworkers supplies and make an attractive cutting board for you or as a special gift.
Tuition: $135.00
Tuition Notes: Tuition Includes Cost Of Materials. Please Call The Store At 281-880-0045 With Any Questions Or To Sign-up.

Click Here to Request Information

Make a Christmas Holiday Acrylic LED Sign on a CNC with: Mark Giles
All

Sunday, December 19, 10 AM - 3 PM

Tools Required: Eye Protection Glasses And Notepad
Description: A CNC machine is the most efficient and versatile machine in today's modern workshop. Using this, the most enjoyable project to make and give is likely a lighted sign with a holiday message, your school or your favorite sport team! Join this CNC introductory class and customize a sign for your child's room, your book shelf or personal bar. Caution. This is addicting! You'll want to make more!
Tuition: $130.00

Click Here to Request Information

Hollowing A Small Neck Vase with: Eric Novak
All

Sunday, December 26, 11 AM - 4 PM

Prerequisite: Basic Turning Skills Preferred
Tools Required: Safety Glasses, Face Shield, Lathe Tools If Desired
Description: You'll l learn the turning skill of hollowing out a vessel though a narrow neck opening. You will start by turning the exterior of your vessel, and then use special hollowing tools to shape the vessel from the inside. Eric will guide you through this process and give tips on how to create even walls and prevent tear-out. Your objet d'art will amaze your friends.
Tuition: $145.00

Click Here to Request Information

Making An End Table with: Phil Elmore
Intermediate

Part 1: Tuesday, December 28, 6 PM - 9 PM
Part 2: Wednesday, December 29, 6 PM - 9 PM
Part 3: Thursday, December 30, 6 PM - 9 PM

Tools Required: All Tools And Materials Provided
Description: : The selection of furniture for your home stirs different emotions in every person. The "Domino" end table lets you build a quality piece of furniture in a reasonable amount of time and provides a successful and satisfying experience. Every home uses end tables so why not build on your woodworking skills while using Festool's German engineered Domino Joiner. Join Phil as he takes you through the furniture making process. Beyond the simple joinery and striking lines you will construct a solid end table that will surely become a family heirloom.
Tuition: $395.00
Tuition Notes: Tuition Includes Cost Of Materials. Please Call The Store At 281-880-0045 With Any Questions Or To Sign-up.

Click Here to Request Information

Top of Page