Woodcraft of Dayton

Hand Planes - 101

Saturday, September 20, 9 AM - 4 PM

Cleaning, Sharpening, Honing, Tuning. You may have an old hand plane that you have inherited or just couldn't resist as a good buy at a garage sale. Then, when you tried to use it, the results left a lot to be desired. All planes, even a brand new one, need tuning and some planes may even need a complete rebuild. If you have a plane that needs some TLC or a new one you need to learn how to tune and clean, this class will show you techniques to make your plane work efficiently. You will start with taking the plane completely apart, evaluating the condition of the parts, and fixing them as needed. You will learn how to sharpen and hone the iron with a provided jig. You will need to bring your own bench plane of any size. The plane can be rusty, but it should not be so rusted to prevent adjustments. Class includes a Veritas MK II Honing Guide #833173

New Woodworking Beginnings

Part 1: Thursday, September 25, 6 PM - 9 PM

Part 2: Saturday, September 27, 9 AM - 5 PM

This woodworking beginning class has been very popular. The project stool will have two steps, a stable platform, and the first step can be raised to form the stool into a small chair. This will make it a very handy item to place in the bathroom or kitchen to allow a young child to reach the sink or it can be put in the family room and use it as small chair made just for them. Plus, it still works as step stool for adults to reach the top shelf in the kitchen or a closet. This class will introduce you to everything you need to progress from selecting wood for a project, to preparing it for finishing. It is designed for the person who knows nothing about woodworking but wants to learn the basics. We will use the table saw, jointer, planer, band saw, and other tools, as well as offering a discussion on several hand tools, all with an emphasis on safety. This is a great class for anyone wanting to see if woodworking is for them.

"Date Night Cutting Board

Friday, October 3, 6 PM - 9 PM

This date night class is a great way for you and your partner to learn to make your own cutting board (approximately 8” x 16”). In this class, we will start with pre-cut wood strips of exotic woods. We will also discuss the techniques of cutting the wood to specific sizes needed for the cutting board. The process will introduce you to the thickness planer and orbital sander. The cutting board will be finished with food safe mineral oil which will bring out the beauty of the wood. While the glue dries, we will have pizza to enjoy so bring your non-alcoholic beverage and make this a date night to remember.