Woodcraft of Dayton

Santa Carving Contest

Part 1: Wednesday, October 1, 12 AM - 12 AM

Part 2: Sunday, November 30, 12 AM - 12 AM

We have teamed up with the Miami Valley Woodcarvers to bring you another carving contest. This is open from 10/1/2025-11/30/2025 for hand carved Santa's. The Santa must be carved from a 2"x2"x6" block of wood and there is only 1 entry per person. The Santa must be carved by the person that enters it. Check our store's event page for a photo of the flyer with all the rules and prizes. Judging will be done by the Miami Valley Woodcarvers on 12/16/2025.

CNC Users Group Meeting

Thursday, October 9, 6:30 PM - 8 PM

This meeting is open to anyone that has a CNC, is thinking about a CNC, or just needs help with Vectric software. We talk everything CNC and encourage you to bring in your projects, both good and bad, to tell us what you learned so others can learn from you. No preregistration is required and this is a free event.

Ornament Making

Saturday, October 11, 1 PM - 2 PM

Tis the season! Let us show you various ways to create custom Christmas ornaments using our kits.

JessEm 2-Day Event (Day 1)

Friday, October 17, 11 AM - 12 PM

Join us for our JessEm ALL DAY EVENT with our featured JessEm demo from 11am to 12pm! See JessEm tools in action throughout both days. Our in-store experts will be available to discuss products, answer questions and give recommendations. While you’re here, enter for a chance to win a JessEm Excel II package. JessEm Clear Cut Table Saw Guide Package or a $100 Woodcraft gift card (no purchase necessary). But Wait! There's a Bonus Prize of a Rout-R-Lift II Router Lift Given Away At Each Store! Plus, enjoy 15% off all JessEm products during the event so you can Just Get Started on your next project!

JessEm 2-Day Event (Day 2)

Saturday, October 18, 12 PM - 1 PM

Join us for our JessEm ALL DAY EVENT with our featured JessEm demo from 1pm to 2pm! See JessEm tools in action throughout both days. Our in-store experts will be available to discuss products, answer questions and give recommendations. While you’re here, enter for a chance to win a JessEm Excel II package. JessEm Clear Cut Table Saw Guide Package or a $100 Woodcraft gift card (no purchase necessary). But Wait! There's a Bonus Prize of a Rout-R-Lift II Router Lift Given Away At Each Store! Plus, enjoy 15% off all JessEm products during the event so you can Just Get Started on your next project!

Miami Valley Wood Carvers Carve-In

Tuesday, October 21, 2 PM - 4 PM

Stop in for this free Carve-in with members of the Miami Valley Wood Carvers. There is no cost and no registration required. Any one is welcome including beginners and advanced carvers. If you have a project that you are working on, bring it along to work on it and show what you are carving.

Kreg Demo Day

Friday, November 7, 11 AM - 12 PM

Kreg Demo Day (Friday 11AM, Saturday 1PM)

CNC Users Group Meeting

Thursday, November 13, 6:30 PM - 8 PM

This meeting is open to anyone that has a CNC, is thinking about a CNC, or just needs help with Vectric software. We talk everything CNC and encourage you to bring in your projects, both good and bad, to tell us what you learned so others can learn from you. No preregistration is required and this is a free event.

Cutting boards

Saturday, November 15, 1 PM - 2 PM

Fun to make and functional in the kitchen – learn to create a custom cutting board. We’ll explain how to put it together and finish it with design and safety in mind.

Miami Valley Wood Carvers Carve-in

Tuesday, November 18, 2 PM - 4 PM

Stop in for this free Carve-in with members of the Miami Valley Wood Carvers. There is no cost and no registration required. Any one is welcome including beginners and advanced carvers. If you have a project that you are working on, bring it along to work on it and show what you are carving.

Easy Wood Tool Demo

Saturday, November 22, 11 AM - 1 PM

Stop by and see these tools in action. Doug from Easy Wood Tools will be here demonstrating various tools and answering all your questions. No registration or cost for this event.

CNC Users Group Meeting

Thursday, December 11, 6:30 PM - 8 PM

This meeting is open to anyone that has a CNC, is thinking about a CNC, or just needs help with Vectric software. We talk everything CNC and encourage you to bring in your projects, both good and bad, to tell us what you learned so others can learn from you. No preregistration is required and this is a free event.

Miami Valley Wood Carvers Carve-in

Tuesday, December 16, 2 PM - 4 PM

Stop in for this free Carve-in with members of the Miami Valley Wood Carvers. There is no cost and no registration required. Any one is welcome including beginners and advanced carvers. If you have a project that you are working on, bring it along to work on it and show what you are carving.

CNC Users Group Meeting

Thursday, January 8, 6:30 PM - 8 PM

This meeting is open to anyone that has a CNC, is thinking about a CNC, or just needs help with Vectric software. We talk everything CNC and encourage you to bring in your projects, both good and bad, to tell us what you learned so others can learn from you. No preregistration is required and this is a free event.

Miami Valley Wood Carvers Carve-in

Tuesday, January 20, 2 PM - 4 PM

Stop in for this free Carve-in with members of the Miami Valley Wood Carvers. There is no cost and no registration required. Any one is welcome including beginners and advanced carvers. If you have a project that you are working on, bring it along to work on it and show what you are carving.

CNC Users Group Meeting

Thursday, February 12, 6:30 PM - 8 PM

This meeting is open to anyone that has a CNC, is thinking about a CNC, or just needs help with Vectric software. We talk everything CNC and encourage you to bring in your projects, both good and bad, to tell us what you learned so others can learn from you. No preregistration is required and this is a free event.

Miami Valley Wood Carvers Carve-in

Tuesday, February 17, 2 PM - 4 PM

Stop in for this free Carve-in with members of the Miami Valley Wood Carvers. There is no cost and no registration required. Any one is welcome including beginners and advanced carvers. If you have a project that you are working on, bring it along to work on it and show what you are carving.

CNC Users Group Meeting

Thursday, March 12, 6:30 PM - 8 PM

This meeting is open to anyone that has a CNC, is thinking about a CNC, or just needs help with Vectric software. We talk everything CNC and encourage you to bring in your projects, both good and bad, to tell us what you learned so others can learn from you. No preregistration is required and this is a free event.

Miami Valley Wood Carvers Carve-in

Tuesday, March 17, 2 PM - 4 PM

Stop in for this free Carve-in with members of the Miami Valley Wood Carvers. There is no cost and no registration required. Any one is welcome including beginners and advanced carvers. If you have a project that you are working on, bring it along to work on it and show what you are carving.

CNC Users Group Meeting

Thursday, April 9, 6:30 PM - 8 PM

This meeting is open to anyone that has a CNC, is thinking about a CNC, or just needs help with Vectric software. We talk everything CNC and encourage you to bring in your projects, both good and bad, to tell us what you learned so others can learn from you. No preregistration is required and this is a free event.

Miami Valley Wood Carvers Carve-in

Tuesday, April 21, 2 PM - 4 PM

Stop in for this free Carve-in with members of the Miami Valley Wood Carvers. There is no cost and no registration required. Any one is welcome including beginners and advanced carvers. If you have a project that you are working on, bring it along to work on it and show what you are carving.

CNC Users Group Meeting

Thursday, May 14, 6:30 PM - 8 PM

This meeting is open to anyone that has a CNC, is thinking about a CNC, or just needs help with Vectric software. We talk everything CNC and encourage you to bring in your projects, both good and bad, to tell us what you learned so others can learn from you. No preregistration is required and this is a free event.

Miami Valley Wood Carvers Carve-in

Tuesday, May 19, 2 PM - 4 PM

Stop in for this free Carve-in with members of the Miami Valley Wood Carvers. There is no cost and no registration required. Any one is welcome including beginners and advanced carvers. If you have a project that you are working on, bring it along to work on it and show what you are carving.

CNC Users Group Meeting

Thursday, June 11, 6:30 PM - 8 PM

This meeting is open to anyone that has a CNC, is thinking about a CNC, or just needs help with Vectric software. We talk everything CNC and encourage you to bring in your projects, both good and bad, to tell us what you learned so others can learn from you. No preregistration is required and this is a free event.

Miami Valley Wood Carvers Carve-in

Tuesday, June 16, 2 PM - 4 PM

Stop in for this free Carve-in with members of the Miami Valley Wood Carvers. There is no cost and no registration required. Any one is welcome including beginners and advanced carvers. If you have a project that you are working on, bring it along to work on it and show what you are carving.

CNC Users Group Meeting

Thursday, July 9, 6:30 PM - 8 PM

This meeting is open to anyone that has a CNC, is thinking about a CNC, or just needs help with Vectric software. We talk everything CNC and encourage you to bring in your projects, both good and bad, to tell us what you learned so others can learn from you. No preregistration is required and this is a free event.

Miami Valley Wood Carvers Carve-in

Tuesday, July 21, 2 PM - 4 PM

Stop in for this free Carve-in with members of the Miami Valley Wood Carvers. There is no cost and no registration required. Any one is welcome including beginners and advanced carvers. If you have a project that you are working on, bring it along to work on it and show what you are carving.

CNC Users Group Meeting

Thursday, August 13, 6:30 PM - 8 PM

This meeting is open to anyone that has a CNC, is thinking about a CNC, or just needs help with Vectric software. We talk everything CNC and encourage you to bring in your projects, both good and bad, to tell us what you learned so others can learn from you. No preregistration is required and this is a free event.

Miami Valley Wood Carvers Carve-in

Tuesday, August 18, 2 PM - 4 PM

Stop in for this free Carve-in with members of the Miami Valley Wood Carvers. There is no cost and no registration required. Any one is welcome including beginners and advanced carvers. If you have a project that you are working on, bring it along to work on it and show what you are carving.

CNC Users Group Meeting

Thursday, September 10, 6:30 PM - 8 PM

This meeting is open to anyone that has a CNC, is thinking about a CNC, or just needs help with Vectric software. We talk everything CNC and encourage you to bring in your projects, both good and bad, to tell us what you learned so others can learn from you. No preregistration is required and this is a free event.

Miami Valley Wood Carvers Carve-in

Tuesday, September 15, 2 PM - 4 PM

Stop in for this free Carve-in with members of the Miami Valley Wood Carvers. There is no cost and no registration required. Any one is welcome including beginners and advanced carvers. If you have a project that you are working on, bring it along to work on it and show what you are carving.

CNC Users Group Meeting

Thursday, October 8, 6:30 PM - 8 PM

This meeting is open to anyone that has a CNC, is thinking about a CNC, or just needs help with Vectric software. We talk everything CNC and encourage you to bring in your projects, both good and bad, to tell us what you learned so others can learn from you. No preregistration is required and this is a free event.

Miami Valley Wood Carvers Carve-in

Tuesday, October 20, 2 PM - 4 AM

Stop in for this free Carve-in with members of the Miami Valley Wood Carvers. There is no cost and no registration required. Any one is welcome including beginners and advanced carvers. If you have a project that you are working on, bring it along to work on it and show what you are carving.

CNC Users Group Meeting

Thursday, November 12, 6:30 PM - 8 PM

This meeting is open to anyone that has a CNC, is thinking about a CNC, or just needs help with Vectric software. We talk everything CNC and encourage you to bring in your projects, both good and bad, to tell us what you learned so others can learn from you. No preregistration is required and this is a free event.

Miami Valley Wood Carvers Carve-in

Tuesday, November 17, 2 PM - 4 PM

Stop in for this free Carve-in with members of the Miami Valley Wood Carvers. There is no cost and no registration required. Any one is welcome including beginners and advanced carvers. If you have a project that you are working on, bring it along to work on it and show what you are carving.

CNC Users Group Meeting

Thursday, December 10, 6:30 PM - 8 PM

This meeting is open to anyone that has a CNC, is thinking about a CNC, or just needs help with Vectric software. We talk everything CNC and encourage you to bring in your projects, both good and bad, to tell us what you learned so others can learn from you. No preregistration is required and this is a free event.

Miami Valley Wood Carvers Carve-in

Tuesday, December 15, 2 PM - 4 PM

Stop in for this free Carve-in with members of the Miami Valley Wood Carvers. There is no cost and no registration required. Any one is welcome including beginners and advanced carvers. If you have a project that you are working on, bring it along to work on it and show what you are carving.