Woodcraft of Loveland

Intro To Woodturning

Saturday, July 26, 11 AM - 4:30 PM

This workshop is designed for those who have recently gotten a wood lathe, or have had one for a while, and haven't gotten around to using it until now. During this workshop students get acquainted with the wood lathe and its parts and accessories. We will cover the turning process, as well as sanding and applying finish to a project while it's on the lathe. Students will also be shown a variety of turning tools and how they function. You will also be introduced to wood selection, tool selection, and tool sharpening. Students will test their skills while working on a small turning project. Students should bring suitable eye protection such as safety glasses, goggles, or a face shield. If you have problems with wood dust, a respirator or dust mask would be advisable. Also bring any wood turning tools you might have. Tools and safety gear will be provided for those who don't own them. Materials for turning will be provided.

Woodworking 101 Small Box

Part 1: Saturday, August 2, 10:30 AM - 2 PM

Part 2: Sunday, August 3, 10:30 AM - 2 PM

The project for this class is a small keepsake box based on the Golden Ratio. In this class you'll learn to use many woodworking power tools like the tablesaw, jointer, planer, and router table. Since we'll start with rough lumber you will learn about milling and cutting wood to reach "S4S." (We'll even tell you what S4S means.) In the end, you'll understand the steps to get from rough lumber to a finished product. If time allows we'll discuss the basics of finishes for the inside and outside of your box. If you've never heard of the "Golden Ratio" and its association with the "Fibonacci Series" (0,1,1,2,3,5,8,13...) you'll even get to learn something new in your woodworking class that doesn't make sawdust!

Woodworking 101 Small Box

Part 1: Saturday, September 27, 10:30 AM - 2 AM

Part 2: Sunday, September 28, 10:30 AM - 2 AM

The project for this class is a small keepsake box based on the Golden Ratio. In this class you'll learn to use many woodworking power tools like the tablesaw, jointer, planer, and router table. Since we'll start with rough lumber you'll about milling and cutting wood to reach "S4S." (We'll even tell you what S4S means.) In the end, you'll understand the steps to get from rough lumber to a finished product. If time allows we'll discuss the basics of finishes for the inside and outside of your box. If you've never heard of the "Golden Ratio" and its association with the "Fibonacci Series" (0,1,1,2,3,5,8,13...) you'll even get to learn something new in your woodworking class that doesn't make sawdust!