Woodcraft of Roanoke

Resin Casting Colored Pen Blanks

Wednesday, October 14, 2026, 5 PM - 9 PM

In this class, Randy will teach you how to mix, pour and cast you own pen blanks using Alumilite resin and powders to make your own special pen blanks. Randy will show you the procedures for using a pressure pot and air compressor. You will cast 4 pen blanks per student in this class. The skills you will learn will allow you to start making your own blanks at home and will carry over to many other things. You will leave the class with the four blanks you created and the four pen blank mold you used in class. No refunds for Cancellations/Reschedules within 7 days of class date.

Beginning Knife Making

Part 1: Friday, October 16, 2026, 5 PM - 7 PM

Part 2: Saturday, October 17, 2026, 9:30 AM - 11:30 AM

Learn the fundamentals of knife kit construction to include shaping and installing knife handles or “scales”, custom pins, or rivets provided in the kits, sanding and finishing the handles to produce a knife you’d be proud to own or gift away. In the class you will use a drill press, bandsaw, oscillating sander, and clamps and epoxies. All materials and knife kits are included in this class of four hours over two consecutive days. Each participant will take home the knife created in this class. Please bring your own safety glasses and dust mask

Build A Cheese Slicer Board Sm

Sunday, October 18, 2026, 1 PM - 5 PM

In this class we will utilize Item #160846 Small Cheese Slicer Board Kit (Included with Class Tuition). Randy will be utilizing Exotic Hardwoods and lead you through the process to complete this project. The topics covered will be proper sizing of the board, drill alignment, routing the edges, assembly, final sanding and finishing. You will take home a completed Cheese Slicer Board that you can be proud of to show off to your friends and family. These make great gifts for all occasions. Finished board will be approximately 3/4” T x 4-3/4” W x 7” L.

Build A Cheese Slicer Board LG2

Sunday, October 18, 2026, 1 PM - 5 PM

In this class we will utilize Item #160847 Large Cheese Slicer Board Kit (Included with Class Tuition). Randy will be utilizing Exotic Hardwoods and lead you through the process to completed this project. The topics covered will be proper sizing of the board, drill alignment, routing the edges, assembly, final sanding and finishing. You will take home a completed Cheese Slicer Board that you can be proud of to show off to your friends and family. These make great gifts for all occasions. Finished board will be approximately 3/4” T x 5-3/4” W x 9-1/2” L.

Build A River Table

Part 1: Wednesday, October 21, 2026, 5 PM - 9 PM

Part 2: Wednesday, October 28, 2026, 9 AM - 5 PM

Come and take this class with Randy and learn how to cast a wavy edged river table. You will build the tabletop by casting the river section of the table on the first day of class. The second day you will come back and demold and shape the top. You will then sand, finish and polish the top and attach the legs. You will be using table saw, routers, planer and sanders to finish your table. You will take home a one-of-a-kind end table that you can be proud of. The techniques learned in this class will serve you well in future epoxy casting projects.

Router Essentials - Full Day Workshop

Thursday, October 22, 2026, 9 AM - 5 PM

Routers are one of the most versatile and essential tools in woodworking. Whether shaping edges, cutting joinery, or making intricate designs, routers open up a world of creative possibilities. This full-day hands-on workshop will cover everything you need to know about both handheld routers and router tables, from basic operations to important tips and techniques. Students will learn how to safely and efficiently use routers for edge profiling, dadoes, rabbets, mortises, template work, and joinery. We will explore bit selection, feed direction, router setup, and safety protocols. By the end of the class, participants will have hands-on experience with both freehand and routing table. You will work with a variety of samples and small projects to help reinforce your learning.

Introduction to Lasers for Woodworking

Friday, October 23, 2026, 5 PM - 9 PM

Upgrade your woodworking skills incorporating the use of laser etching and engraving. Basic overview/understanding of XTOOLs software. Learn how to create your own woodworking LOGO. Understand some of the applications such as engrave pens, Christmas ornaments, and logos. Use the laser to layout/cut wood for classic scroll saw projects. Learn to personalize your woodworking projects. For the class we will be utilizing both the XTOOLS F1 and F1 Ultra. We will give a basic understanding of the differences between the two. There will not be a need to bring a computer however if you are able to download the XTOOLS software on a laptop prior to the class you are welcome to bring it with you. The intention of this class is to introduce you to the endless possibilities that incorporating a laser into your shop.

Handcut Dovetail Joinery

Tuesday, October 27, 2026, 9 AM - 5 PM

Dovetail joinery is one of the most iconic and respected techniques in fine woodworking, valued for both its strength and timeless beauty. This full-day, hands-on workshop is dedicated to mastering handcut dovetails, with a focus on both through dovetails and half-blind dovetails. Students will learn the essential skills behind accurate layout, marking, sawing, and chiseling, along with techniques to achieve clean, tight-fitting joints. We’ll cover tool selection, grain awareness, and step-by-step methods to build confidence working by hand. Throughout the day, students will practice each stage of the process and complete sample joints they can take home as a reference for future projects. By the end of the class, students will have a solid foundation in handcut dovetail joinery and the confidence to incorporate it into their own woodworking projects. No refunds or cancellations within 7 days of the class

End Grain Basket Weave Cutting Board

Friday, October 30, 2026, 9 AM - 4:30 PM

This is possibly one of the simplest 3D cutting boards to make. Tom will present tips on precise glue ups, cutting on a table saw, flattening your boards on a planer, sanding, routing, and finishing. We supply all the materials, and you will go home with a 3D cutting board.

Building a Traditional Pegged Stool

Part 1: Thursday, November 5, 2026, 9 AM - 5 PM

Part 2: Friday, November 6, 2026, 9 AM - 5 PM

"Build a timeless low-height pegged stool in this immersive two-day woodworking workshop focused on traditional craftsmanship and foundational chairmaking techniques. While the form may appear simple, this stool introduces many of the core concepts found in historic staked and post-and-rung furniture. Students will work extensively with hand tools including hand planes, chisels, layout tools, and handsaws, while also using select modern machines for efficiency. Along the way, students will learn how to shape tapered octagonal legs with hand planes, drill compound leg angles, and create strong round mortise-and-tenon joinery secured with traditional wedges. The class also introduces essential chairmaking concepts such as rake, splay, and resultant angles foundational skills used in Windsor and stick chair construction. By the end of the workshop, students will leave with a completed handmade stool, practical hand-tool experience, and a deeper appreciation for traditional woodworking techniques that have lasted for centuries.”

Introduction To Turning Pens

Saturday, November 7, 2026, 9 AM - 12:30 PM

Learn how to make the professional pens found in fine gift shops. Mark will instruct you on the complete process from wood selection to the final finish. After completing this class you will take home a completed pen to show off. Soon you will be designing and making these works of art for family and friends.

Introduction To Woodturning

Saturday, November 7, 2026, 1 PM - 5 PM

The safe use of a wood lathe and turning tools will be emphasized. Choice of wood, elements of design, ways of holding the wood onto the lathe, proper turning techniques and tool sharpening are discussed and demonstrated. Each student will actually turn a project to take home.

Antique Peppermill

Sunday, November 8, 2026, 1 PM - 5 PM

Learn how to make an antique peppermill with a lathe turned wooden blank and a peppermill kit. Randy will instruct you on the complete process from wood selection to the final finish. After completing this class you will take home a completed peppermill to show off. Soon you will be designing and making these works of functional art for family and friends.

Fun With Resin

Wednesday, November 11, 2026, 5 PM - 7 PM

Join Randy for an entry level class in Epoxy Resin. You will learn about the different types of epoxy and pigments to color the epoxy. During this intro course Randy will take you through a successful pour on a small Epoxy project that you get to take home (once that epoxy is cured!) The skills learned in this class will give you the confidence to get started in making many things with epoxy.

End Grain Cutting Boards Made Simple

Friday, November 13, 2026, 9 AM - 4:30 PM

If you have been woodworking for any time at all you have scrap pieces of wood in your shop. We will show you how to repurpose your scraps into a cutting board. This class is designed show that end grain cutting boards are more about the process than our current woodworking skill set. We will take you through layout/design, building, and finishing your (potentially)first end grain cutting board. WARNING (making end grain cutting boards can become additive). We supply all the materials, and you will go home with a beautiful cutting board.

Introduction To Bowl Turning

Sunday, November 15, 2026, 1 PM - 5 PM

Learn the fundamentals of bowl turning. This will include bowl design, blank preparation, chucking, shaping of outside, hollowing of inside and finishing. You will also learn the proper use of bowl turning tools and how to easily sharpen them. You will be proud to take home and display or use the bowl you make in class.

Resin Casting Colored Pen Blanks

Wednesday, November 18, 2026, 9 AM - 1 PM

In this class, Randy will teach you how to mix, pour and cast you own pen blanks using Alumilite resin and powders to make your own special pen blanks. Randy will show you the procedures for using a pressure pot and air compressor. You will cast 4 pen blanks per student in this class. The skills you will learn will allow you to start making your own blanks at home and will carry over to many other things. You will leave the class with the four blanks you created and the four pen blank mold you used in class. No refunds for Cancellations/Reschedules within 7 days of class date.

Maximizing Your Bandsaw

Friday, November 20, 2026, 5 PM - 6 PM

Join Alex Snodgrass, the leading authority on the bandsaw, for an in-depth seminar on unlocking the full potential of your bandsaw. Participants will learn how to fine tune a bandsaw for smoother cuts and greater accuracy. He will also demonstrate how Carter Products accessories extend the tool’s range. Guides, mag fence, blades, inserts and a circle cutter will be highlighted for their role in precise and efficient work. The seminar will also include a brief segment on Titebond® glues, focusing on the optimal types for various woodworking projects. This seminar lays the groundwork for Alex’s box building class, offering students the chance to learn directly from a respected authority in woodworking. 

Build a Pin Box and Two Drawer Wave Box

Saturday, November 21, 2026, 9 AM - 5 PM

Renowned bandsaw master Alex Snodgrass will lead a hands-on class devoted to building two striking projects: a four-drawer pin box and a two-drawer wave box. Instruction covers setup, cutting techniques and safe shaping methods while Alex guides participants step by step and answers questions throughout the process. He also reveals the secrets behind his signature designs, including magnetic boxes, push button boxes, the gravity pin box and an articulated snake. Additionally, participants will receive exclusive access to a private video showcasing the completed projects, extending the learning beyond the classroom. By the end of the day, students not only complete two boxes but also gain the rare chance to learn directly from a legend in the craft, leaving with the skills and confidence to create almost any style of bandsaw box. Secure your spot TODAY. Class size is limited to 10.

Build A Cheese Slicer Board Sm

Wednesday, November 25, 2026, 5 PM - 9 PM

In this class we will utilize Item #160846 Small Cheese Slicer Board Kit (Included with Class Tuition). Randy will be utilizing Exotic Hardwoods and lead you through the process to complete this project. The topics covered will be proper sizing of the board, drill alignment, routing the edges, assembly, final sanding and finishing. You will take home a completed Cheese Slicer Board that you can be proud of to show off to your friends and family. These make great gifts for all occasions. Finished board will be approximately 3/4” T x 4-3/4” W x 7” L.

Build A Cheese Slicer Board LG2

Wednesday, November 25, 2026, 5 PM - 9 PM

In this class we will utilize Item #160847 Large Cheese Slicer Board Kit (Included with Class Tuition). Randy will be utilizing Exotic Hardwoods and lead you through the process to completed this project. The topics covered will be proper sizing of the board, drill alignment, routing the edges, assembly, final sanding and finishing. You will take home a completed Cheese Slicer Board that you can be proud of to show off to your friends and family. These make great gifts for all occasions. Finished board will be approximately 3/4” T x 5-3/4” W x 9-1/2” L.

Router Essentials - Full Day Workshop

Monday, November 30, 2026, 9 AM - 5 PM

Routers are one of the most versatile and essential tools in woodworking. Whether shaping edges, cutting joinery, or making intricate designs, routers open up a world of creative possibilities. This full-day hands-on workshop will cover everything you need to know about both handheld routers and router tables, from basic operations to important tips and techniques. Students will learn how to safely and efficiently use routers for edge profiling, dadoes, rabbets, mortises, template work, and joinery. We will explore bit selection, feed direction, router setup, and safety protocols. By the end of the class, participants will have hands-on experience with both freehand and routing table. You will work with a variety of samples and small projects to help reinforce your learning.

Fundamental Woodworking: Build A Small Table

Saturday, December 5, 2026, 9 AM - 4:30 PM

This class is for the beginner woodworker. In this class we will use fundamental woodworking principles. We will cover how to read plan drawings and use a combination of power tools and hand tools. Students will build and finish a small Shaker inspired table that they will take home and proudly show off their new skills. All materials and tools will be provided.