Woodcraft of Orlando

314_BS_Box.jpg

$115.00

Beginner

Bandsaw 101 - Keepsake Box

with Jerry VanCamp

Friday, September 4, 2026, 10 AM - 5 PM

Required Tools

Besides the router, the bandsaw is the most versatile power tool you can own. This class will teach you how to properly set up and safely use the saw. We will cover the different types and sizes of bandsaws, how to select the proper blade, and how to tune the tool to achieve the best results. You will get hands-on experience making straight and curved cuts on a flat board as well as practice re-sawing techniques. For the second half of the class, each student will use what they've learned to complete a small bandsaw box.

$110.00

Beginner

Woodworking 101

with Dominic Fontana

Saturday, September 5, 2026, 10 AM - 5 PM

Required Tools

Have you ever wanted to take on a project in the shop but not sure where to get started? Would you like to learn how to safely use power tools? Then this is the class for you. Here you will make a cutting board and learn how to effectively and safely use the table saw, jointer, planer, miter saw, and router.

314_Boot_camp.jpg

$110.00

Beginner

Women's Power Tool Boot Camp

with Connie Sterling

Sunday, September 6, 2026, 10 AM - 5 PM

Required Tools

Ladies, are you interested in DIY but don't know where to start? Our Power Tool Boot Camp is for you! We'll get you started as you learn how to use the tools safely and with confidence. You'll use a circular saw, jig saw, drill-driver, Kreg Pocket-Hole jig, hand-held router, and random orbital sander in this class to build your own tool tote. Sound like fun? It is! Sorry guy's, women only.

314_Date_Night_Wine.jpg

$90.00

Beginner

Date Night: Wine Caddy and Cheese Slicer

with Dominic Fontana

Friday, September 11, 2026, 6 PM - 9 PM

Required Tools

Looking for a date night that’s a little different? In this Date Night class, couples will team up to create a cheese slicer/board and a wine caddy from scratch. It’s the perfect mix of fun, creativity and a little sawdust! No experience needed; just bring your partner and get ready for a night in the shop you won’t forget! All of these sessions are priced per couple, so you only need to register for one spot.

$110.00

Beginner

Women's Woodworking

with Connie Sterling

Saturday, September 12, 2026, 10 AM - 5 PM

Required Tools

Have you ever wanted to take on a project in the shop but not sure where to get started? Would you like to learn how to safely use power tools? Then this is the class for you. Here you will make a cutting board and learn how to effectively and safely use the table saw, jointer, planer, miter saw, and router. Sorry guys, women only.

$115.00

Beginner/Intermediate

Scroll Saw: Intro to Intarsia

with Teri Long

Saturday, September 12, 2026, 10 AM - 4 PM

Required Tools

Take the next step in your scroll saw journey with this exciting class. Students will learn all the basic Intarsia steps from beginning to end . Topics covered: selection of wood, layout and transfer of patterns, cutting techniques, and final assembly. Options for sanding and shaping your pieces will also be covered. At the end of the class, students will be ready to tackle more complex patterns. Plus, you’ll get to take you’re custom project home with you.

314_WW102_Box.jpg

$125.00

Beginner/Intermediate

Woodworking 102 - Lidded Box

with Dominic Fontana

Sunday, September 13, 2026, 10 AM - 5 PM

Required Tools

Ready to put your new woodworking skills to the test? In this class, you will make a lidded mitered box and learn about joinery, accurate measuring, and precise cutting techniques. This class is designed for those with basic woodworking experience who want to expand their skills and tackle a more advanced project.

314_Boot_camp.jpg

$110.00

Beginner

Women's Power Tool Boot Camp

with Connie Sterling

Saturday, September 19, 2026, 10 AM - 5 PM

Required Tools

Ladies, are you interested in DIY but don't know where to start? Our Power Tool Boot Camp is for you! We'll get you started as you learn how to use the tools safely and with confidence. You'll use a circular saw, jig saw, drill-driver, Kreg Pocket-Hole jig, hand-held router, and random orbital sander in this class to build your own tool tote. Sound like fun? It is! Sorry guy's, women only.

$95.00

Beginner

Knife Making 101

with Dominic Fontana

Sunday, September 20, 2026, 1 PM - 5 PM

Required Tools

Take your woodworking skills into the kitchen with this unique project. In this class, students will assemble a custom knife kit by cutting, attaching, shaping and sanding the handle to fit in their hand perfectly. Walk away with a one-of-a-kind kitchen knife that blends function and craftsmanship.

$120.00

Beginner

Router Basics - Decorative Box

with Jerry VanCamp

Friday, September 25, 2026, 10 AM - 4 PM

Required Tools

Here you will learn the fine points of using the router to the maximum. We will cover the various types of routers and their uses, essential safety practices, bit selection, and demo the best ways to make it the most productive tool in your shop. Students will use these new skills to make a beautiful box, complete with a fitted lid, using only the router. This decorative box features rabbet joints, dado's, and trimming all done on the versatile router. Expand your knowledge while creating your one of a kind box that you get to take home and show off to all your friends.

314_Serving_Tray.jpg

$125.00

Beginner

Date Night: Nesting Trays

with Dominic Fontana

Friday, September 25, 2026, 6 PM - 9 PM

Required Tools

The best projects are the ones built together. In this class, couples will work together to cut, assemble, and fit a set of matching nesting trays. Whether used for serving, organizing, or displaying around the home, these trays are both practical and stylish. No experience needed, just come ready to create something together and enjoy a fun night in the shop. All of these sessions are priced per couple, so you only need to register for one spot.

$110.00

Beginner

Woodworking 101

with Dominic Fontana

Saturday, September 26, 2026, 10 AM - 5 PM

Required Tools

Have you ever wanted to take on a project in the shop but not sure where to get started? Would you like to learn how to safely use power tools? Then this is the class for you. Here you will make a cutting board and learn how to effectively and safely use the table saw, jointer, planer, miter saw, and router.

$105.00

Beginner

Turning Basics

with Bill Dalton

Saturday, September 26, 2026, 10 AM - 5 PM

Required Tools

You can create great works of art or add fancy embelishments to your woodworking pieces all from your lathe. Either way, here is where it begins. Once done with this class you will know the types, components, tools, and accessories of the lathe. Bill will demonstrate the various basic cuts and you will then get hands on practice of the fundamentals of turning, including bead, cove, and fillet cuts.

$110.00

Beginner

Women's Woodworking

with Connie Sterling

Sunday, September 27, 2026, 10 AM - 5 PM

Required Tools

Have you ever wanted to take on a project in the shop but not sure where to get started? Would you like to learn how to safely use power tools? Then this is the class for you. Here you will make a cutting board and learn how to effectively and safely use the table saw, jointer, planer, miter saw, and router. Sorry guys, women only.

314_WW103.jpg

$300.00

Intermediate/Advanced

Woodworking 103 - End Table

with Dominic Fontana

Part 1: Saturday, October 3, 2026, 10 AM - 5 PM

Part 2: Sunday, October 4, 2026, 10 AM - 5 PM

Required Tools

The class you've been waiting for is here! If you've taken WW101 and 102 and are ready for your next project, this is it. In Woodworking 103, you'll combine your skills to build a beautiful and functional end table from start to finish. Dominic will teach you how to taper legs, build a drawer and handle final assembly, bringing everything you've learned together in one project.

$105.00

Beginner

Basic Bowl Turning

with Bill Dalton

Saturday, October 3, 2026, 10 AM - 5 PM

Required Tools

Wooden bowls are both decorative and functional. They are an essential part of any woodturners repertoire. Here you can gain the knowledge and hands on practice you will need to turn the most elegant bowls. And of course, safety and sharpening are covered.

$115.00

Beginner

Pen Turning

with Jerry VanCamp

Friday, October 9, 2026, 11 AM - 4 PM

Required Tools

Learn and practice the basic techniques for turning beautiful Wall Street II and Slimline pens. The class will cover proper blank prep, mounting on the mandrel, turning techniques, sanding, finishing, and assembly of both a Wall Street II and a Slimline style pen. Once complete, you will have 2 finished pens that you get to take home to show off to all your family and fiends. This is a very popular hands-on class. !!!WARNING!!! Pen turning can become habit forming and cause you to spend hours in the shop.

314_Date_pizza.jpg

$120.00

Beginner

Date Night: Pizza Cutter and Pizza Server

with Dominic Fontana

Friday, October 9, 2026, 6 PM - 9 PM

Required Tools

Trade dinner reservations for the woodshop. In this date night class, couples will work side by side at the lathe to turn a pizza cutter and pizza server. Learn the basics of woodturning while creating a set you'll actually use at home, perfect for your next pizza night together. Priced per couple so you only need to register for one spot.

314_Boot_camp.jpg

$110.00

Beginner

Women's Power Tool Boot Camp

with Connie Sterling

Saturday, October 10, 2026, 10 AM - 4 PM

Required Tools

Ladies, are you interested in DIY but don't know where to start? Our Power Tool Boot Camp is for you! We'll get you started as you learn how to use the tools safely and with confidence. You'll use a circular saw, jig saw, drill-driver, Kreg Pocket-Hole jig, hand-held router, and random orbital sander in this class to build your own tool tote. Sound like fun? It is! Sorry guy's, women only.

314_Bird.jpg

$125.00

All Levels

Carving Basics: Comfort Bird

with Ellyzabeth Gamage

Saturday, October 10, 2026, 10 AM - 4 PM

Required Tools

Everything you need to get started in wood carving. The class will start with an overview of essential skills, including how to handle and safely secure your work piece, as well as how to keep carving tools sharp while prioritizing safety. Each student will get a BeverCraft Comfort Bird kit which includes everything you'll need to learn the basics. At the end of the class, you'll get to take your kit home with you along with your completed project.

$110.00

Beginner

Woodworking 101

with Dominic Fontana

Sunday, October 11, 2026, 10 AM - 5 PM

Required Tools

Have you ever wanted to take on a project in the shop but not sure where to get started? Would you like to learn how to safely use power tools? Then this is the class for you. Here you will make a cutting board and learn how to effectively and safely use the table saw, jointer, planer, miter saw, and router.

$120.00

Beginner

Turn A Peppermill

with Jerry VanCamp

Saturday, October 17, 2026, 10 AM - 4 PM

Required Tools

Learn how to turn a peppermill from start to finish. Jerry will teach and demo the entire process of mounting, drilling, finishing, and assembly. Each student will complete their own peppermill.

314_Boot_camp.jpg

$110.00

Beginner

Women's Power Tool Boot Camp

with Connie Sterling

Saturday, October 17, 2026, 10 AM - 5 PM

Required Tools

Ladies, are you interested in DIY but don't know where to start? Our Power Tool Boot Camp is for you! We'll get you started as you learn how to use the tools safely and with confidence. You'll use a circular saw, jig saw, drill-driver, Kreg Pocket-Hole jig, hand-held router, and random orbital sander in this class to build your own tool tote. Sound like fun? It is! Sorry guy's, women only.

314_WW102_Box.jpg

$125.00

Beginner/Intermediate

Woodworking 102 - Lidded Box

with Dominic Fontana

Sunday, October 18, 2026, 10 AM - 5 PM

Required Tools

Ready to put your new woodworking skills to the test? In this class, you will make a lidded mitered box and learn about joinery, accurate measuring, and precise cutting techniques. This class is designed for those with basic woodworking experience who want to expand their skills and tackle a more advanced project.

314_Date_Night_Wine.jpg

$90.00

Beginner

Date Night: Wine Caddy and Cheese Slicer

with Dominic Fontana

Friday, October 23, 2026, 6 PM - 9 PM

Required Tools

Looking for a date night that’s a little different? In this Date Night class, couples will team up to create a cheese slicer/board and a wine caddy from scratch. It’s the perfect mix of fun, creativity and a little sawdust! No experience needed; just bring your partner and get ready for a night in the shop you won’t forget! All of these sessions are priced per couple, so you only need to register for one spot.

$110.00

Beginner

Women's Woodworking

with Dominic Fontana

Saturday, October 24, 2026, 10 AM - 5 PM

Required Tools

Have you ever wanted to take on a project in the shop but not sure where to get started? Would you like to learn how to safely use power tools? Then this is the class for you. Here you will make a cutting board and learn how to effectively and safely use the table saw, jointer, planer, miter saw, and router. Sorry guys, women only.

314_Sharpening.jpg

$85.00

Beginner

Lathe Tool Sharpening Made Easy

with Bill Dalton

Saturday, October 24, 2026, 10 AM - 3 PM

Required Tools

This class is for anyone who is new to or struggles with sharpening their lathe tools. Find all the different grind angles and jigs confusing? This is the perfect class for you. Students are welcome to bring any tools they want to sharpen. If you have a grinder, bring it with you. We'll help you make sure it is set up and tuned properly for the best sharpening results. The class will also cover maintaining your grinder and wheels. Bill's hands-on teaching will give you the practice to get the most out of your sharpening set up.

314_Boot_camp.jpg

$110.00

Beginner

Women's Power Tool Boot Camp

with Connie Sterling

Sunday, October 25, 2026, 10 AM - 5 PM

Required Tools

Ladies, are you interested in DIY but don't know where to start? Our Power Tool Boot Camp is for you! We'll get you started as you learn how to use the tools safely and with confidence. You'll use a circular saw, jig saw, drill-driver, Kreg Pocket-Hole jig, hand-held router, and random orbital sander in this class to build your own tool tote. Sound like fun? It is! Sorry guy's, women only.