This a one of a kind class taught by longtime carver Duff Greenwood. Duff will review wood & tool selection, the basic four carving cuts, proper techniques, safety and how to carve a WOODEN SPOON. Written outline, instructions and plans will be included. There is a material cost of $10.00___ for the basswood carving blank. Students need to bring a sharp carving knife with a blade of 1” to 1-1/4” and a sharp palm gouge ¼” to 3/8” wide or purchase these at the store. Another great class for beginning carvers.
×
$85.00
Beginner/Intermediate
Learn to Carve A Wooden Spoon
Saturday, April 18, 2026, 10:30 AM - 1:30 PM
Class Size: 6
| Available Seats: 0
Tools Required: Bring Your Own Carving Tools
Class Refund Policy: No Refunds for Cancellations/Reschedules within 7 days of Class date.
This class is currently full and cannot be purchased online.
×
Learn to Carve A Wooden Spoon
Saturday, April 18, 2026, 10:30 AM - 1:30 PM
Registration for this class is currently closed. Please check back for future sessions.
We apologize for the inconvenience — even the best projects need a little extra sanding time.
×
Required Tools
Bring Your Own Carving Tools
$85.00
All Levels
How To Make A Perfect Workshop
with Mike Cobb
Tuesday, April 21, 2026, 5:30 PM - 8:30 PM
If you've ever dreamed of that perfect workshop, then stop dreaming and learn how to make it reality. In this fun and informative class, you'll learn virtually all the key ingredients of how to revamp your old shop or design a new one from scratch. All the bases will be covered, from power, lighting and climate control to work flow, machinery, hand tools, finishing area, dust collection and lumber storage. This class doesn't miss a thing with the end result being a great environment to pursue your favorite hobby.
×
$85.00
All Levels
How To Make A Perfect Workshop
Tuesday, April 21, 2026, 5:30 PM - 8:30 PM
Class Size: 8
| Available Seats: 8
Class Refund Policy: No Refunds for Cancellations/Reschedules within 7 days of Class date.
$85.00
Beginner/Intermediate
Learn how to Make A Beautiful Charcuterie Board
with Bob Settich
Saturday, April 25, 2026, 10 AM - 1 PM
Every kitchen needs a cutting board or its upscale cousin, a charcuterie board. Learn the correct way to build a charcuterie board with resident expert Bob Settich. You'll be given full-size patterns for both for both traditional paddle cutting boards plus eight decorative shapes for a total of 26 different boards. You'll learn how to create edge-laminated cutting boards to show beautiful grain patterns. Additionally, Bob will teach the best strategies for stock selection, glue choice and proven clamping methods for flat panels and template routing techniques and of course using food safe finishes for all your creations.
×
$85.00
Beginner/Intermediate
Learn how to Make A Beautiful Charcuterie Board
Saturday, April 25, 2026, 10 AM - 1 PM
Class Size: 6
| Available Seats: 5
Class Refund Policy: No Refunds for Cancellations/Reschedules within 7 days of Class date.
After years of waiting, our hands on cabinet class is finally here! In the 102 class you will build a Euro-style base cabinet carcass. This class is designed to get you familiar with the most basic construction of the cabinet itself. Plywood is included in the cost of the class and full sheets will be broken down by the students. In the following class, your cabinet will evolve with the door and drawer to provide a fully functional cabinet! This is intended to be class 2 of a 3 part series.
×
$150.00
All Levels
Cabinet making 102
Sunday, April 26, 2026, 11 AM - 3 PM
Class Size: 5
| Available Seats: 2
Tuition Notes: Includes materials
Prerequisite: Intro to cabinet making
Tools Required: Cabinet making 102
Class Refund Policy: No Refunds for Cancellations/Reschedules within 7 days of Class date.
Calling all wannabe woodcarvers. Join us for a beginning wood carving class taught by longtime carver Duff Greenwood. Students will learn wood & tool selection, the basic four carving cuts, proper techniques, safety and how to carve a Comfort Bird.
Written instructions and plans will be included. There is a material cost of $10 for the basswood carving block. Students need to bring a sharp carving knife with a two inch blade or purchase one at the store. This is a great class for beginning carvers.
With little or no lathe experience, you can make your very own beautiful pen in 2 hours. Resident expert Alex Birkett has taught hundreds of students the art of pen-making in just one evening class. Your very own pen makes a great gift for almost any occasion. And the great part is, once you've made one, you can virtually make any style you wish. Without a doubt, this is our most popular class.
×
$95.00
All Levels
Pen Turning For Beginners
Sunday, May 3, 2026, 11:30 AM - 1:30 PM
Class Size: 4
| Available Seats: 4
Tools Required: Wood Turning Tools
Class Refund Policy: No Refunds for Cancellations/Reschedules within 7 days of Class date.
With little or no lathe experience, you can make your very own beautiful pen in 2 hours. Resident expert Alex Birkett has taught hundreds of students the art of pen-making in just one evening class. Your very own pen makes a great gift for almost any occasion. And the great part is, once you've made one, you can virtually make any style you wish. Without a doubt, this is our most popular class.
×
$95.00
All Levels
Pen Turning For Beginners
Sunday, May 3, 2026, 2 PM - 4 PM
Class Size: 4
| Available Seats: 4
Tools Required: Wood Turning Tools
Class Refund Policy: No Refunds for Cancellations/Reschedules within 7 days of Class date.
Many woodworkers consider the router the best tool in their shop. This "beginner's" router class, will cover which type of router is best suited for you, the 5 must have router bits and their uses, correct router cutting techniques, key accessories, router tables, maintenance and SAFETY. If you own a router or you're thinking about buying one, this class is tailor-made for you.
Every kitchen needs a cutting board or its upscale cousin, a charcuterie board. Learn the correct way to build a charcuterie board with resident expert Bob Settich. You'll be given full-size patterns for both for both traditional paddle cutting boards plus eight decorative shapes for a total of 26 different boards. You'll learn how to create edge-laminated cutting boards to show beautiful grain patterns. Additionally,, Bob will the best strategies for stock selection, glue choice and proven clamping methods for flat panels and template routing techniques and of course using food safe finishes for all your creations.
×
$85.00
Beginner/Intermediate
Charcuterie Board
Saturday, May 9, 2026, 10:30 AM - 1:30 PM
Class Size: 6
| Available Seats: 6
Tools Required: Pencil, notepad
Class Refund Policy: No Refunds for Cancellations/Reschedules within 7 days of Class date.
LARGEST TOOL SALE IN KANSAS CITY IS BACK - MAY16TH
Once again Woodcraft's back parking lot will be loaded with "Ton's of Tools" from 9 AM- 1:00 PM. You can buy, sell or trade gently used woodworking machines and hand tools. This is great opportunity to grab on-a-kind deals at bargain prices. You can also sell your equipment as every parking slot is free to use on a first come, first served basis. Don't miss this opportunity to upgrade your shop. Additionally, there will be in store demo's and special sales on that day. Food will also be available in the parking lot too. Check the store for more details
See you there!!
×
$0.00
All Levels
17TH ANNUAL SWAP n' SHOP
Saturday, May 16, 2026, 9 AM - 1 PM
Class Size: 999
| Available Seats: 999
Tools Required: na
Class Refund Policy: No Refunds for Cancellations/Reschedules within 7 days of Class date.
A challenging project, but makes an excellent gift or decoration. Chip will teach you
the basic concept of turning friction fitted lidded boxes. Chip will share his knowledge of turning
different style boxes including tenon boxes, inset-lidded boxes and hollow lidded boxes. From there,
you will choose one box type to turn and develop your own creative piece of decorative art. From
concepts on box turning, you will be able to create many beautiful boxes when you go back to your
shop.
This much requested class is back into reality. Professional cabinet maker Eric Stone will take you through the critical steps of creating beautiful cabinetry. You will learn the necessary tools and equipment to most cabinet projects, including design setup, cabinet components, materials including plywood and hardwood, cut preparation including measurements, cut list for cabinet parts, carcass assembly, face frame assembly, drawer and door construction, final assembly and finishing. Sign up soon as there are only 10 open spots for the class and it usually fills up fast.
×
$95.00
All Levels
Intro to cabinet making
Saturday, May 23, 2026, 10 AM - 1 PM
Class Size: 10
| Available Seats: 9
Tools Required: Notetaking
Class Refund Policy: No Refunds for Cancellations/Reschedules within 7 days of Class date.
The final step of building your own European style base cabinet is here! Bring in the carcass you built in the 102 class and it will be finished with edge banding, a door, and a drawer. For the hardware is included and will all be soft close to give you a beautifully functional final product!
×
$150.00
Beginner/Intermediate
Cabinet Making 103
Sunday, May 24, 2026, 11 AM - 3:30 PM
Class Size: 5
| Available Seats: 5
Tuition Notes: Includes all hardware
Prerequisite: Cabinet Making 102
Tools Required: Cabinet making 102
Class Refund Policy: No Refunds for Cancellations/Reschedules within 7 days of Class date.
Kumiko is a Japanese woodworking art form involving decorative patterns with thin strips of wood. Wayne Peterson will take you through the process of creating a traditional Japanese panel using hand tools. You will create the most popular pattern, the Asa-no-ha, opening the possibility of additional patterns to enhance your woodworking projects! Minimum class size of 3 people. Tools required: 3/4 or 1" SHARP chisel, small mallet, #2 square drive screwdriver.
×
$125.00
All Levels
Intro to Kumiko
Saturday, May 30, 2026, 10 AM - 2 PM
Class Size: 5
| Available Seats: 5
Tools Required: Kumiko
Class Refund Policy: No Refunds for Cancellations/Reschedules within 7 days of Class date.
×
Required Tools
3/4" or 1" SHARP chisel, small mallet, #2 square drive screwdriver
$100.00
Intermediate/Advanced
Wobbly Candle Stick
with Alex Birkett
Sunday, May 31, 2026, 11:30 AM - 2:30 PM
It's time to up your turning game! In this class we will be enjoying "off center" turning while making a functional tea light candle holder. Lathe experience is a must, as this is a more technical style of turning!!
×
$100.00
Intermediate/Advanced
Wobbly Candle Stick
Sunday, May 31, 2026, 11:30 AM - 2:30 PM
Class Size: 4
| Available Seats: 1
Class Refund Policy: No Refunds for Cancellations/Reschedules within 7 days of Class date.
NEW CLASS - In this class, resident expert, Bob Settich will teach you the time-honored mortise and tenon joint. This strongest of all joints will enable you to make tables and other furniture of almost any style.
With a hand held router and a jig that you'll make with scrap plywood, you'll cut mortises with amazing precision. Additionally, the jig also places the mirror-image mortise in the legs at the opposite end of each table or chair rail. You'll also practice several different ways of producing tenons that fit perfectly. Lastly, you'll learn techniques for no-stress glue-ups, plus several reinforcing steps that will create incredibly strong furniture
×
$85.00
Beginner/Intermediate
Learn Mortise & Tenon Joinery
Saturday, June 6, 2026, 10 AM - 1 PM
Class Size: 8
| Available Seats: 8
Tools Required: Notetaking
Class Refund Policy: No Refunds for Cancellations/Reschedules within 7 days of Class date.
With little or no lathe experience, you can make your very own beautiful pen in 2 hours. Resident expert Alex Birkett has taught hundreds of students the art of pen-making in just one evening class. Your very own pen makes a great gift for almost any occasion. And the great part is, once you've made one, you can virtually make any style you wish. Without a doubt, this is our most popular class.
×
$95.00
All Levels
Pen Turning For Beginners
Sunday, June 7, 2026, 2 PM - 4 PM
Class Size: 4
| Available Seats: 4
Tools Required: Wood Turning Tools
Class Refund Policy: No Refunds for Cancellations/Reschedules within 7 days of Class date.
This much requested class is back into reality. Professional cabinet maker Eric Stone will take you through the critical steps of creating beautiful cabinetry. You will learn the necessary tools and equipment to most cabinet projects, including design setup, cabinet components, materials including plywood and hardwood, cut preparation including measurements, cut list for cabinet parts, carcass assembly, face frame assembly, drawer and door construction, final assembly and finishing. Sign up soon as there are only 10 open spots for the class and it usually fills up fast.
×
$95.00
All Levels
Intro to cabinet making
Saturday, June 13, 2026, 10 AM - 1 PM
Class Size: 10
| Available Seats: 10
Tools Required: Notetaking
Class Refund Policy: No Refunds for Cancellations/Reschedules within 7 days of Class date.
Resident expert Chip Siskey will teach a class that is a must for the beginner, or a jumpstart to someone who has been trying to learn as they go. In this class, we will focus on safe lathe operation with discussion of lathes, drive centers, chucks, and other available accessories. We will discuss woodturning tools you may already have or have run across, and those available comparing the usefulness and quality of the metals. Our focus will turn to the seven basic tool where we will discuss when and how to use each one. We will finish with some hands on experience to ensure you grasp the proper tool presentation and use for each of these tools. There are so many tools available, the class will help you to select the correct tools for the projects you wish to complete. If you have tools, bring them but they are not necessary.
×
$95.00
Beginner
Introduction To Woodturning
Sunday, June 14, 2026, 12 PM - 4 PM
Class Size: 10
| Available Seats: 10
Tools Required: Safety Glasses
Class Refund Policy: No Refunds for Cancellations/Reschedules within 7 days of Class date.
This a one of a kind class taught by longtime carver Duff Greenwood. Duff will review wood & tool selection, the basic four carving cuts, proper techniques, safety and how to carve a WOODEN SPOON. Written outline, instructions and plans will be included. There is a material cost of $10.00___ for the basswood carving blank. Students need to bring a sharp carving knife with a blade of 1” to 1-1/4” and a sharp palm gouge ¼” to 3/8” wide or purchase these at the store. Another great class for beginning carvers.
Many woodworkers consider the router the best tool in their shop. This "beginner's" router class, will cover which type of router is best suited for you, the 5 must have router bits and their uses, correct router cutting techniques, key accessories, router tables, maintenance and SAFETY. If you own a router or you're thinking about buying one, this class is tailor-made for you.
This much requested class is back into reality. Professional cabinet maker Conner Johnson will take you through the critical steps of creating beautiful cabinetry. You will learn the necessary tools and equipment to most cabinet projects, including design setup, cabinet components, materials including plywood and hardwood, cut preparation including measurements, cut list for cabinet parts, carcass assembly, face frame assembly, drawer and door construction, final assembly and finishing. Sign up soon as there are only 10 open spots for the class and it usually fills up fast.
×
$95.00
All Levels
Intro to cabinet making
Saturday, July 11, 2026, 10 AM - 1 PM
Class Size: 10
| Available Seats: 10
Tools Required: Notetaking
Class Refund Policy: No Refunds for Cancellations/Reschedules within 7 days of Class date.
With little or no lathe experience, you can make your very own beautiful pen in 2 hours. Resident expert Alex Birkett has taught hundreds of students the art of pen-making in just one evening class. Your very own pen makes a great gift for almost any occasion. And the great part is, once you've made one, you can virtually make any style you wish. Without a doubt, this is our most popular class.
×
$95.00
All Levels
Pen Turning For Beginners
Sunday, July 12, 2026, 11 AM - 1 PM
Class Size: 4
| Available Seats: 4
Tools Required: na
Class Refund Policy: No Refunds for Cancellations/Reschedules within 7 days of Class date.
Many woodworkers consider the router the best tool in their shop. This "beginner's" router class, will cover which type of router is best suited for you, the 5 must have router bits and their uses, correct router cutting techniques, key accessories, router tables, maintenance and SAFETY. If you own a router or you're thinking about buying one, this class is tailor-made for you.
New Class - Join resident expert Chip Siskey as he will guide you in making a beautiful shallow bowl that incorporates a square edged rim. You will focus on mounting techniques and proper tool presentation for precise cutting with an emphasis on the clean cut necessary to leave a square edge. DON'T MISS THIS ONE.
×
$90.00
Beginner/Intermediate
NEW-Square Edge Bowl
Saturday, July 18, 2026, 12 PM - 4 PM
Class Size: 5
| Available Seats: 5
Tools Required: Basic Turning Tools Plus Some Type Of Hollowing Tool
Class Refund Policy: No Refunds for Cancellations/Reschedules within 7 days of Class date.
×
Required Tools
Basic Turning Tools Plus Some Type Of Hollowing Tool
Calling all wannabe woodcarvers. Join us for a beginning wood carving class taught by longtime carver Duff Greenwood. Students will learn wood & tool selection, the basic four carving cuts, proper techniques, safety and how to carve a Comfort Bird.
Written instructions and plans will be included. There is a material cost of $10 for the basswood carving block. Students need to bring a sharp carving knife with a two inch blade or purchase one at the store. This is a great class for beginning carvers.
This great class will give you the essential knowledge for choosing the right finish for virtually any project you encounter. Additionally, you'll get hands-on experience to achieve great results every time. You'll learn proper surface preparation that will ensure a perfect platform for your finish. Including the advantages and drawbacks of four major categories of wood finishes - including Oil, Shellac, Lacquer, and Wipe-On Poly. You'll also learn the crucial step of finishing the finish to achieve the exact finish your want for your project. Please bring some solid wood and/or plywood boards to experiment with the finishes you choose. This class is guaranteed to fill up fast so sign up soon.
×
$90.00
Beginner
Finishing At It's Best - NEW
Saturday, July 25, 2026, 10 AM - 1 PM
Class Size: 8
| Available Seats: 8
Tools Required: Safety Glasses
Class Refund Policy: No Refunds for Cancellations/Reschedules within 7 days of Class date.
×
Required Tools
Safety Glasses
Choosing a selection results in a full page refresh.
Favorite Your Store
Form field Zip or City is required. Please fill out the value.
