Woodcraft of Downingtown

$300.00

Beginner/Intermediate

CNC Crafting 101

with Bob Kraut

Saturday, August 23, 9:30 AM - 1:30 PM

Join us at WoodCraft in Downingtown, PA, for an immersive introduction to CNC crafting. Led by Bob Kraut, an experienced hand in CNC and Laser Engraving, this 4-hour workshop offers a gentle deep-dive into the Vectric Aspire software. From foundational design principles to hands-on crafting, participants will leave with the skills and satisfaction of creating their own custom sign in a supportive, small-group setting.

537_Penturning.jpg

$130.00

All Levels

Turn A Pen - An Intro To Pen Turning

with Mike Flipovic

Sunday, August 24, 5:30 PM - 8:30 PM

Welcome to the exciting world of pen turning! This class is made for all ages eight and up. Starting with a nice piece of wood and some hardware, by the end of class you have a beautiful, functional pen you made yourself. Learn the fundamentals of creating a pen, from wood and tool selection to proper lathe techniques and finishing.

537_TableSawBasics.jpg

$125.00

All Levels

Table Saw Basics

with Tom Temple

Tuesday, August 26, 5:30 PM - 8:30 PM

If you are thinking about buying a tablesaw or have recently purchased one. This class is designed to introduce the beginning woodworker to this versatile tool and its many uses. We will cover table saw set up, ripping, cross cuts and more.

537_MachineDoveTails.jpg

$130.00

All Levels

Machine Cut Dovetails On The Porter Cable Jig

with Drew Knight

Thursday, August 28, 5:30 PM - 8 PM

Learn to make perfect dovetail joints using a router and the Porter Cable 4200 series dovetail jig. You will create sample joints half blind dovetails. Setup and tuning of the joints will be explained and demonstrated.

537_BandsawBasics.jpg

$130.00

All Levels

Band Saw Basics

with Drew Knight

Tuesday, September 2, 5:30 PM - 8:30 PM

When you get acquainted with a band saw, you'll be amazed at how important and useful it can be. This introductory course will cover many uses of the band saw and help you maximize your use of this versatile tool.

537_HandCutDovetail.jpg

$150.00

All Levels

Hand Cut Dovetail Construction

with Steve Garrison

Saturday, September 6, 9:30 AM - 2 PM

The dovetail is one of the strongest and most attractive joints used in woodworking. Learn to hand cut dovetails with ease and accuracy in this great introductory class.

537_CandleStick.jpg

$0.00

Intermediate/Advanced

Candle Stick Turning

with Mike Flipovic

Sunday, September 7, 5:30 PM - 8:30 PM

Learn more advanced turning techniques while crafting your own one of a kind candle stick with Mike.

537_FirstBowl.jpg

$170.00

Beginner/Intermediate

Turn Your First Bowl

with Greg Turner

Sunday, September 14, 5:30 PM - 8:30 PM

Students will practice the cuts appropriate for shaping and smoothing the inside and outside using a bowl gouge, parting tool and a scraper. At the end of the class students will have turned a bowl on their own!

$200.00

Beginner/Intermediate

Build Your First Cabinet With Tom Temple

with Tom Temple

Part 1: Saturday, September 20, 9:30 AM - 3 PM

Part 2: Sunday, September 21, 11:30 AM - 3 PM

Have you ever thought about building your own cabinets? Tom will walk you through the steps to building your first cabinet. This cabinet will include a faceframe and a door. Come join the class that will give you the confidence to tackle your own cabinet projects.

$0.00

Intermediate

Turned Lidded Boxes

with Greg Turner

Sunday, September 21, 5:30 PM - 8:30 PM

Expand on your previously learned bowl turning skills. In this class we will turn a fitted lidded box.

537_Penturning.jpg

$130.00

All Levels

Turn A Pen - An Intro To Pen Turning

with Mike Flipovic

Sunday, September 28, 12 AM - 8:30 PM

Welcome to the exciting world of pen turning! This class is made for all ages eight and up. Starting with a nice piece of wood and some hardware, by the end of class you have a beautiful, functional pen you made yourself. Learn the fundamentals of creating a pen, from wood and tool selection to proper lathe techniques and finishing.

537_TableSawBasics.jpg

$125.00

All Levels

Table Saw Basics

with Tom Temple

Tuesday, September 30, 5:30 PM - 8:30 PM

If you are thinking about buying a tablesaw or have recently purchased one. This class is designed to introduce the beginning woodworker to this versatile tool and its many uses. We will cover table saw set up, ripping, cross cuts and more.

$300.00

Beginner/Intermediate

CNC Crafting 101

with Bob Kraut

Saturday, October 4, 9:30 AM - 1:30 PM

Join us at WoodCraft in Downingtown, PA, for an immersive introduction to CNC crafting. Led by Bob Kraut, an experienced hand in CNC and Laser Engraving, this 4-hour workshop offers a gentle deep-dive into the Vectric Aspire software. From foundational design principles to hands-on crafting, participants will leave with the skills and satisfaction of creating their own custom sign in a supportive, small-group setting.

537_Penturning.jpg

$130.00

All Levels

Turn A Pen - An Intro To Pen Turning

with Mike Flipovic

Sunday, October 5, 5:30 PM - 8:30 PM

Welcome to the exciting world of pen turning! This class is made for all ages eight and up. Starting with a nice piece of wood and some hardware, by the end of class you have a beautiful, functional pen you made yourself. Learn the fundamentals of creating a pen, from wood and tool selection to proper lathe techniques and finishing.

$995.00

Intermediate/Advanced

Woodworking Fundamentals

with Tom Temple

Part 1: Monday, October 6, 5:30 PM - 8:30 PM

Part 2: Monday, October 13, 5:30 PM - 8:30 PM

Part 3: Monday, October 20, 5:30 PM - 8:30 PM

Part 4: Monday, October 27, 5:30 PM - 8:30 PM

In this 4-part class you will gain knowledge and learn the proper techniques to turn rough cut lumber into a finished 3D cutting board. These beautiful cutting boards sell in kitchen stores for up to $450; this class will teach you why they are worth the cost. You will use woodworking shop equipment including the jointer, planer, bandsaw and table saw to turn rough cut lumber direct from the mill into dimensioned lumber. Then, using the lumber you milled, you will go through multiple cuts, glue ups, and sanding utilizing the drum sander to create your own beautifully crafted end grain 3D cutting board.

537_FirstBowl.jpg

$170.00

Beginner/Intermediate

Turn Your First Bowl

with Greg Turner

Sunday, October 12, 12 PM - 3 PM

Students will practice the cuts appropriate for shaping and smoothing the inside and outside using a bowl gouge, parting tool and a scraper. At the end of the class students will have turned a bowl on their own!

$165.00

All Levels

Introduction To The Router And Router Table

with Tom DeBeradinis

Saturday, October 18, 9:30 AM - 1:30 PM

Router Basics and Router Table have been consolidated into a single course covering the safe use and operation of both machines. Your instructor covers the safety considerations, equipment selection, bit selection and techniques to use these versatile tools. .

537_Penturning.jpg

$130.00

All Levels

Turn A Pen - An Intro To Pen Turning

with Mike Flipovic

Sunday, October 26, 5:30 PM - 8:30 PM

Welcome to the exciting world of pen turning! This class is made for all ages eight and up. Starting with a nice piece of wood and some hardware, by the end of class you have a beautiful, functional pen you made yourself. Learn the fundamentals of creating a pen, from wood and tool selection to proper lathe techniques and finishing.

537_TableSawBasics.jpg

$125.00

All Levels

Table Saw Basics

with Tom Temple

Tuesday, October 28, 5:30 PM - 8:30 PM

If you are thinking about buying a tablesaw or have recently purchased one. This class is designed to introduce the beginning woodworker to this versatile tool and its many uses. We will cover table saw set up, ripping, cross cuts and more.

537_Penturning.jpg

$130.00

All Levels

Turn A Pen - An Intro To Pen Turning

with Mike Flipovic

Sunday, November 2, 5:30 PM - 8:30 PM

Welcome to the exciting world of pen turning! This class is made for all ages eight and up. Starting with a nice piece of wood and some hardware, by the end of class you have a beautiful, functional pen you made yourself. Learn the fundamentals of creating a pen, from wood and tool selection to proper lathe techniques and finishing.

537_BandsawBasics.jpg

$130.00

All Levels

Band Saw Basics

with Drew Knight

Tuesday, November 4, 5:30 PM - 8 PM

When you get acquainted with a band saw, you'll be amazed at how important and useful it can be. This introductory course will cover many uses of the band saw and help you maximize your use of this versatile tool.

537_FirstBowl.jpg

$170.00

Beginner/Intermediate

Turn Your First Bowl

with Greg Turner

Sunday, November 9, 12 PM - 3:30 PM

Students will practice the cuts appropriate for shaping and smoothing the inside and outside using a bowl gouge, parting tool and a scraper. At the end of the class students will have turned a bowl on their own!

537_MachineDoveTails.jpg

$130.00

All Levels

Machine Cut Dovetails On The Porter Cable Jig

with Drew Knight

Tuesday, November 11, 5:30 PM - 7:30 PM

Learn to make perfect dovetail joints using a router and the Porter Cable 4200 series dovetail jig. You will create sample joints half blind dovetails. Setup and tuning of the joints will be explained and demonstrated.

$300.00

Beginner/Intermediate

CNC Crafting 101

with Bob Kraut

Saturday, November 15, 9:30 AM - 1:30 PM

Join us at WoodCraft in Downingtown, PA, for an immersive introduction to CNC crafting. Led by Bob Kraut, an experienced hand in CNC and Laser Engraving, this 4-hour workshop offers a gentle deep-dive into the Vectric Aspire software. From foundational design principles to hands-on crafting, participants will leave with the skills and satisfaction of creating their own custom sign in a supportive, small-group setting.

537_Penturning.jpg

$130.00

All Levels

Turn A Pen - An Intro To Pen Turning

with Mike Flipovic

Sunday, November 23, 5:30 PM - 8:30 PM

Welcome to the exciting world of pen turning! This class is made for all ages eight and up. Starting with a nice piece of wood and some hardware, by the end of class you have a beautiful, functional pen you made yourself. Learn the fundamentals of creating a pen, from wood and tool selection to proper lathe techniques and finishing.

537_TableSawBasics.jpg

$125.00

All Levels

Table Saw Basics

with Tom Temple

Tuesday, November 25, 5:30 PM - 8:30 PM

If you are thinking about buying a tablesaw or have recently purchased one. This class is designed to introduce the beginning woodworker to this versatile tool and its many uses. We will cover table saw set up, ripping, cross cuts and more.

537_Penturning.jpg

$130.00

All Levels

Turn A Pen - An Intro To Pen Turning

with Mike Flipovic

Sunday, December 7, 5:30 PM - 8:30 PM

Welcome to the exciting world of pen turning! This class is made for all ages eight and up. Starting with a nice piece of wood and some hardware, by the end of class you have a beautiful, functional pen you made yourself. Learn the fundamentals of creating a pen, from wood and tool selection to proper lathe techniques and finishing.

$250.00

Beginner/Intermediate

Design 101

with Tom Temple

Part 1: Tuesday, December 9, 5:30 PM - 8:30 PM

Part 2: Tuesday, December 16, 5:30 PM - 8:30 PM

This class will help both the beginner and Intermediate develop the skills to bring a new project from concept through construction. In this two part class students will: - Develop a project concept. - Create working drawings, including detailed measurement and construction details. - Develop a materials list and cut sheet. - Utilizing the newly created plan, students will build their project. Project construction will utilize the use of the band saw, jointer, planer, table saw along with other shop tools. If you are looking to learn to design your own projects, this is the class for you!

$200.00

ALL

Build Your First Cabinet With Tom Temple

with Tom Temple

Part 1: Saturday, December 13, 9:30 AM - 4:30 PM

Part 2: Sunday, December 14, 11:30 AM - 4 PM

Have you ever thought about building your own cabinets? Tom will walk you through the steps to building your first cabinet. This cabinet will include a faceframe and a door. Come join the class that will give you the confidence to tackle your own cabinet projects.

537_FirstBowl.jpg

$170.00

Beginner/Intermediate

Turn Your First Bowl

with Greg Turner

Sunday, December 14, 5 PM - 8 PM

Students will practice the cuts appropriate for shaping and smoothing the inside and outside using a bowl gouge, parting tool and a scraper. At the end of the class students will have turned a bowl on their own!

$300.00

Beginner/Intermediate

CNC Crafting 101

with Bob Kraut

Saturday, December 27, 9:30 AM - 1:30 PM

Join us at WoodCraft in Downingtown, PA, for an immersive introduction to CNC crafting. Led by Bob Kraut, an experienced hand in CNC and Laser Engraving, this 4-hour workshop offers a gentle deep-dive into the Vectric Aspire software. From foundational design principles to hands-on crafting, participants will leave with the skills and satisfaction of creating their own custom sign in a supportive, small-group setting.

537_Penturning.jpg

$130.00

All Levels

Turn A Pen - An Intro To Pen Turning

with Mike Flipovic

Sunday, December 28, 5:30 PM - 8:30 PM

Welcome to the exciting world of pen turning! This class is made for all ages eight and up. Starting with a nice piece of wood and some hardware, by the end of class you have a beautiful, functional pen you made yourself. Learn the fundamentals of creating a pen, from wood and tool selection to proper lathe techniques and finishing.

537_TableSawBasics.jpg

$125.00

All Levels

Table Saw Basics

with Tom Temple

Tuesday, December 30, 5:30 PM - 8:30 PM

If you are thinking about buying a tablesaw or have recently purchased one. This class is designed to introduce the beginning woodworker to this versatile tool and its many uses. We will cover table saw set up, ripping, cross cuts and more.