Woodcraft of Dallas

Build a Epoxy Resin Charcuterie Board

Part 1: Monday, August 25, 6 PM - 10 PM

Part 2: Tuesday, August 26, 6 PM - 10 PM

Part 3: Friday, August 29, 6 PM - 10 PM

HANDS-ON. Our customers have asked for this class so, here we go!!! Our Cutting Board Class Teacher, Doug Jones, has an awesome new class that will teach you how to combine Wood with the amazing Epoxy Pour Resins. Students will learn how the epoxy molds work, how to mix the epoxy and add color to create a one-of-a-kind Charcuterie /Cutting Board. The finish Board will measure about 1 x 8 x 18 inches. All Materials will be supplied in the class. This will be a VERY POPULAR CLASS so, sign up A.S.A.P. No refunds for cancellations/reschedules within 7 days of class date.

Square Board Fundamentals

Wednesday, August 27, 6 PM - 10 PM

HANDS-ON. Got rough boards? Want to learn the simple steps needed to machine that board square, flat and the correct thickness to build something? Then this is the perfect hands-on class for you. Howard will teach the basics of wood technology and stock preparation. This fun, quick class will cover the use of the table saw, jointer and thickness planer. Students will also learn which side of the board should be used for the outside of the project and learn how to glue up a panel without it cupping. DON'T UNDER ESTIMATE THIS CLASS!!...it is a "MUST TAKE" for anyone buying rough cut lumber. This class fills quickly so, sign up A.S.A.P. No refunds for cancellations/reschedules within 7 days of class date.

Build An End-Grain Cutting Board

Part 1: Monday, September 1, 6 PM - 10 PM

Part 2: Tuesday, September 2, 6 PM - 10 PM

Part 3: Wednesday, September 3, 6 PM - 10 PM

HANDS-ON. We have a GREAT KITCHEN CLASS from Doug Jones. Students will build, over the three nights, an End-Grain style Cutting Board from two contrasting types of wood. This 12" X 18" Cutting Board will be constructed from "End-Grain", not the Long-Grain of the boards. This traditional method of building a Cutting Board makes it VERY DURABLE. It will takes cuts from a knife and not show any damage for many years to come. Doug is a great woodworker and his hands-on approach to teaching will help you learn all the tricks for End-Grain cutting and glue-up. You will also learn many valuable machining tips that will help you in all your woodworking projects. This new class will be a very popular and fill quickly so, sign up A.S.A.P. No refunds for cancellations/reschedules within 7 days of class date.

Turn A Lidded Box

Part 1: Thursday, September 4, 6 PM - 10 PM

Part 2: Friday, September 5, 6 PM - 10 PM

HANDS-ON. PLEASE NO BEGINNERS. BASIC TURNING SKILLS NEEDED. We have a new Turning Class that will be a big hit! Michael Boyle will provide hands-on teaching as each student turns a small "coke-can" size box with a fitted lid. You will learn how to cut the lid off the main bowl body and then cut a lip on the lid, just right so, it "SNAPS" into place. This is a fun lathe project and will teach you valuable turning skills that will last a life time. Space is limited so, sign up A.S.A.P. No refunds for cancellations/reschedules within 7 days of class date.

Basic Pen Turning Class

Saturday, September 6, 9 AM - 6 AM

HANDS-ON. 14 Years and older, under 18 must be accompanied by an adult. We have a new Pen Instructor! Join Chuck Silber as he brings the world of pen turning to life. Pen turning on the lathe is a great hobby that can also make extra money. Chuck has a great hands-on approach to teaching and will show students all the steps of how to set up your lathe with the right mandrel and bushings for easy pen turning with great results. You will leave the class with a top notch looking pen and the skills needed to make many more. No refunds for cancellations/reschedules within 7 days of class date.

Build A Spline Corner Keepsake Box

Sunday, September 7, 9 AM - 6 PM

HANDS-ON. Mark Seay has come up with a great Table Saw Box Class. Mark is a wonderful teacher and his hands-on style of teaching really helps everyone learn about "how" to do woodworking! Students will make a small Keepsake Box from two contrasting woods on the table saw. The little box will have spline cut corners with contrasting wood splines to give it strength. The contrasting splines will give the box an extra sharp look. This is a really great looking little box and would make a wonderful gift for that someone special. No refunds for cancellations/reschedules within 7 days of class date.

Build a Epoxy Resin Charcuterie Board

Part 1: Monday, September 8, 6 PM - 10 PM

Part 2: Tuesday, September 9, 6 PM - 10 PM

Part 3: Friday, September 12, 6 PM - 10 PM

HANDS-ON. Our customers have asked for this class so, here we go!!! Our Cutting Board Class Teacher, Doug Jones, has an awesome new class that will teach you how to combine Wood with the amazing Epoxy Pour Resins. Students will learn how the epoxy molds work, how to mix the epoxy and add color to create a one-of-a-kind Charcuterie /Cutting Board. The finish Board will measure about 1 x 8 x 18 inches. All Materials will be supplied in the class. This will be a VERY POPULAR CLASS so, sign up A.S.A.P. No refunds for cancellations/reschedules within 7 days of class date.

Basic Woodworking

Part 1: Saturday, September 13, 9 AM - 6 PM

Part 2: Sunday, September 14, 9 AM - 6 PM

HANDS-ON. OUR MOST POPULAR CLASS!! ADULTS ONLY - NO YOUTH - 18 YEARS AND OLDER. This foundation course introduces you to the wonderful world of woodworking. You will learn how to set alignment and use the chop saw, table saw, jointer, planner, band saw, router table and a stationary sander. Safety will be emphasized with each machine. Each student will complete a hands-on project using basic joinery techniques. Types of wood and finishing techniques will also be discussed. This is a great class and it fills quickly every month so, sign up A.S.A.P. No refunds for cancellations/reschedules within 7 days of class date.

Basic Turning

Part 1: Monday, September 15, 6 PM - 10 PM

Part 2: Tuesday, September 16, 6 PM - 10 PM

Part 3: Wednesday, September 17, 6 PM - 10 PM

HANDS-ON. Paul DeMars will teach this dynamic and fundamental, "3-session", class for all beginning turners. Session #1: Spindle Turning. This class is geared to help you get started on the lathe. Tool selection, handling, safety and machine basics will be covered. You will learn how to make cuts to produce beads, coves and other basic spindle shapes. Session #2: Bowl Turning/Face Grain. Perfect your basic skills by learning to turn a wooden bowl. Face plate turning, tool selection, techniques, sanding and finishing will be covered. Session #3: Bowl Turning/End- Grain. Learn to turn another style of bowl by it's end-grain. End-grain bowls are very different than face-grain bowls and will allow you to expand your turning skills. Paul is a great teacher and will provide each student with hands-on skills that will last a lifetime. No refunds for cancellations/reschedules within 7 days of class date.

Basic Woodworking

Part 1: Saturday, September 20, 9 AM - 6 PM

Part 2: Sunday, September 21, 9 AM - 6 PM

HANDS-ON. OUR MOST POPULAR CLASS!! ADULTS ONLY - NO YOUTH - 18 YEARS AND OLDER. This foundation course introduces you to the wonderful world of woodworking. You will learn how to set alignment and use the chop saw, table saw, jointer, planner, band saw, router table and a stationary sander. Safety will be emphasized with each machine. Each student will complete a hands-on project using basic joinery techniques. Types of wood and finishing techniques will also be discussed. This is a great class and it fills quickly every month so, sign up A.S.A.P. No refunds for cancellations/reschedules within 7 days of class date.

Turn A Pepper Mill

Part 1: Monday, September 22, 6 PM - 10 PM

Part 2: Tuesday, September 23, 6 PM - 10 PM

HANDS-ON. Paul DeMars has another great class for all our Turners. Spend the day with us and take home a wonderful 10" - 12" tall Pepper Mill. Paul will provide hands-on instruction as each student turns, applies the food safe finish and installs a metal style grinder unit. This will be a very popular class so sign up A.S.A.P. No refunds for cancellations/reschedules within 7 days of class date.

Band Saw Basics

Wednesday, September 24, 6 PM - 10 PM

HANDS-ON. ATTENTION ANYONE THAT HAS A BAND SAW! Are you a beginner or old-timer and have a Band Saw and not sure if it is working just right? Then this is the perfect class for you. This class will begin at "step one" on Band Saw setup and tuneup. Wheel alignment, blade selection, blade installation, cool blocks vs bearing guides and fine tuning will all be covered. Each student will do a setup and then cut a piece of perfect veneer. DON'T UNDERESTIMATE THIS CLASS! It is a MUST TAKE for anyone, beginner or old-timer, that uses this great machine. This promises to be a very popular class and will fill quickly so, sign up A.S.A.P. No refunds for cancellations/reschedules within 7 days of class date.

Square Board Fundamentals

Thursday, September 25, 6 PM - 10 PM

HANDS-ON. Got rough boards? Want to learn the simple steps needed to machine that board square, flat and the correct thickness to build something? Then this is the perfect hands-on class for you. Howard will teach the basics of wood technology and stock preparation. This fun, quick class will cover the use of the table saw, jointer and thickness planer. Students will also learn which side of the board should be used for the outside of the project and learn how to glue up a panel without it cupping. DON'T UNDER ESTIMATE THIS CLASS!!...it is a "MUST TAKE" for anyone buying rough cut lumber. This class fills quickly so, sign up A.S.A.P. No refunds for cancellations/reschedules within 7 days of class date.

Cabinet Making For Beginners

Saturday, September 27, 9 AM - 6 PM

LECTURE/DEMO. This is the perfect sister class for our popular Raised Panel Door Class. In this Lecture/Demo, students will learn how to build first-class looking cabinets for the kitchen, laundry room, bathroom or workshop. Learn how to build both the upper and lower units and how to install them for that perfect fit. Various joinery methods will be shown including Kreg Pocket Holes and Biscuits. Learn how to install Euro-style hinges with or without a face-frame, and also learn the tricks of the trade to installing drawer glides. This is a great class... don't miss it! No refunds for cancellations/reschedules within 7 days of class date.

Finishing For The Home Shop

Sunday, September 28, 9 AM - 6 PM

LECTURE/DEMO. Confused with all the different ways to finish your project? Learn simple "old world" finishing from a student of Fine Woodworking's contributing editor and woodworking master, Tage Frid. This class will teach the four finishes that will easily work for the home shop. Demos will show how to prepare the wood for finishing, using everything from the thickness planer, to cabinet scraper, to the proper way to use sandpaper. Then learn the easy steps to apply a traditional oil finish, spray lacquer, varnish and French polish. Students will receive handy take-home notes detailing each of these finishes. No refunds for cancellations/reschedules within 7 days of class date.

Raised Panel Doors

Part 1: Tuesday, September 30, 6 PM - 10 PM

Part 2: Wednesday, October 1, 6 PM - 10 PM

HANDS-ON. Students will learn two great methods for making a raised panel door. Learn features for rail and stile design and the many looks the panel can have. Each student will make two small raised panel doors - one with the table saw and one with the router table. Students will receive a notebook outlining both methods. No refunds for cancellations/reschedules within 7 days of class date.

Hand Tool Basics & Sharpening

Part 1: Thursday, October 2, 6 PM - 10 PM

Part 2: Friday, October 3, 6 PM - 10 PM

HANDS-ON. Chisels, scrapers, planes and saws are the most fundamental woodworking tools in the shop. Howard will provide hands-on instruction on how to sharpen, adjust and use each of these great tools. Students will practice "old world" basic exercises with each tool. Tool #1: Learn basic chisel techniques and how to cut a mortise for a hinge faster than any machine takes to set up. Tool #2: Learn how to use a cabinet scraper as a step toward applying a fine finish. Tool #3: Learn how great using a hand plane can be. Plane an edge straight, flatten a board and cut chamfers with ease. Tool #4: Sharpen and reset your dovetail saw so it cuts perfectly. Learn simple exercises that will give you great confidence with your saw. This is a wonderful hands-on class that anyone interested in hand tools will enjoy. Bring your own tools or buy new ones and leave this class knowing how to correctly use them on your next project. Please bring your own tools: 3/8" or 1/2" Chisel, Cabinet Scraper (Card Scraper), Hand Plane (#3 or #4 or #5) or any type of Block Plane and a Dovetail type Saw. NOTE: THIS IS NOT A RESTORATION CLASS. Tools Need To Be In Working Order. Please No Old Or Rusted Hand Tools That Could Need A Lot Of Work. No refunds for cancellations/reschedules within 7 days of class date.

Router Basics

Saturday, October 4, 9 AM - 6 PM

HANDS-ON. We have a great class that will teach all the ins-and-outs of how to use your Router. Both Router table work and hand-held Router work will be covered. Students will get hands-on experience and build a small storage box during this informative class. You will learn different techniques of cut, fence and miter gauge work, Router bit selection and basic Router safety. Cutting dados, rabbets, slots, mitered corners and edge trim will be easy. This is a VERY POPULAR class and will fill quickly so, sign up A.S.A.P. No refunds for cancellations/reschedules within 7 days of class date.

Turn A Pepper Mill

Sunday, October 5, 9 AM - 6 PM

HANDS-ON. Paul DeMars has another great class for all our Turners. Spend the day with us and take home a wonderful 10" - 12" tall Pepper Mill. Paul will provide hands-on instruction as each student turns, applies the food safe finish and installs a metal style grinder unit. This will be a very popular class so sign up A.S.A.P. No refunds for cancellations/reschedules within 7 days of class date.

Router Basics

Part 1: Wednesday, October 8, 6 PM - 10 PM

Part 2: Thursday, October 9, 6 PM - 10 PM

HANDS-ON. We have a great class that will teach all the ins-and-outs of how to use your Router. Both Router table work and hand-held Router work will be covered. Students will get hands-on experience and build a small storage box during this informative class. You will learn different techniques of cut, fence and miter gauge work, Router bit selection and basic Router safety. Cutting dados, rabbets, slots, mitered corners and edge trim will be easy. This is a VERY POPULAR class and will fill quickly so, sign up A.S.A.P. No refunds for cancellations/reschedules within 7 days of class date.

Square Board Fundamentals

Friday, October 10, 6 PM - 10 PM

HANDS-ON. Got rough boards? Want to learn the simple steps needed to machine that board square, flat and the correct thickness to build something? Then this is the perfect hands-on class for you. Howard will teach the basics of wood technology and stock preparation. This fun, quick class will cover the use of the table saw, jointer and thickness planer. Students will also learn which side of the board should be used for the outside of the project and learn how to glue up a panel without it cupping. DON'T UNDER ESTIMATE THIS CLASS!!...it is a "MUST TAKE" for anyone buying rough cut lumber. This class fills quickly so, sign up A.S.A.P. No refunds for cancellations/reschedules within 7 days of class date.

Basic Woodworking

Part 1: Saturday, October 11, 9 AM - 6 PM

Part 2: Sunday, October 12, 9 AM - 6 PM

HANDS-ON. OUR MOST POPULAR CLASS!! ADULTS ONLY - NO YOUTH - 18 YEARS AND OLDER. This foundation course introduces you to the wonderful world of woodworking. You will learn how to set alignment and use the chop saw, table saw, jointer, planner, band saw, router table and a stationary sander. Safety will be emphasized with each machine. Each student will complete a hands-on project using basic joinery techniques. Types of wood and finishing techniques will also be discussed. This is a great class and it fills quickly every month so, sign up A.S.A.P. No refunds for cancellations/reschedules within 7 days of class date.

Basic Turning

Part 1: Monday, October 13, 6 PM - 10 PM

Part 2: Tuesday, October 14, 6 PM - 10 PM

Part 3: Wednesday, October 15, 6 PM - 10 PM

HANDS-ON. Paul DeMars will teach this dynamic and fundamental, "3-session", class for all beginning turners. Session #1: Spindle Turning. This class is geared to help you get started on the lathe. Tool selection, handling, safety and machine basics will be covered. You will learn how to make cuts to produce beads, coves and other basic spindle shapes. Session #2: Bowl Turning/Face Grain. Perfect your basic skills by learning to turn a wooden bowl. Face plate turning, tool selection, techniques, sanding and finishing will be covered. Session #3: Bowl Turning/End- Grain. Learn to turn another style of bowl by it's end-grain. End-grain bowls are very different than face-grain bowls and will allow you to expand your turning skills. Paul is a great teacher and will provide each student with hands-on skills that will last a lifetime. No refunds for cancellations/reschedules within 7 days of class date.

Basic Bowl Turning and Design

Part 1: Thursday, October 16, 6 PM - 10 AM

Part 2: Friday, October 17, 6 PM - 10 AM

HANDS-ON. PLEASE NO BEGINNERS. BASIC TURNING SKILLS NEEDED. We have a Great Turning Class for anyone interested in learning how to turn a bowl. Michael will provide hands-on teaching as each students turns a medium-size bowl about 5-6 inches in diameter. Students will learn how to mount a bowl blank to the lathe using several different methods and which tools to use and how to use them to make clean efficient cuts. This class also will cover the various types of finish, including oils, friction polish and even just buffing with wax. This will be a very popular class so, Sign-up A.S.A.P. No refunds for cancellations/reschedules within 7 days of class date.

Basic Pen Turning Class

Saturday, October 18, 9 AM - 6 PM

HANDS-ON. 14 Years and older, under 18 must be accompanied by an adult. We have a new Pen Instructor! Join Chuck Silber as he brings the world of pen turning to life. Pen turning on the lathe is a great hobby that can also make extra money. Chuck has a great hands-on approach to teaching and will show students all the steps of how to set up your lathe with the right mandrel and bushings for easy pen turning with great results. You will leave the class with a top notch looking pen and the skills needed to make many more. No refunds for cancellations/reschedules within 7 days of class date.

Build A Spline Corner Keepsake Box

Sunday, October 19, 9 AM - 6 PM

HANDS-ON. Mark Seay has come up with a great Table Saw Box Class. Mark is a wonderful teacher and his hands-on style of teaching really helps everyone learn about "how" to do woodworking! Students will make a small Keepsake Box from two contrasting woods on the table saw. The little box will have spline cut corners with contrasting wood splines to give it strength. The contrasting splines will give the box an extra sharp look. This is a really great looking little box and would make a wonderful gift for that someone special. No refunds for cancellations/reschedules within 7 days of class date.

Build a Epoxy Resin Charcuterie Board

Part 1: Monday, October 20, 6 PM - 10 PM

Part 2: Tuesday, October 21, 6 PM - 10 PM

Part 3: Friday, October 24, 6 PM - 10 PM

HANDS-ON. Our customers have asked for this class so, here we go!!! Our Cutting Board Class Teacher, Doug Jones, has an awesome new class that will teach you how to combine Wood with the amazing Epoxy Pour Resins. Students will learn how the epoxy molds work, how to mix the epoxy and add color to create a one-of-a-kind Charcuterie /Cutting Board. The finish Board will measure about 1 x 8 x 18 inches. All Materials will be supplied in the class. This will be a VERY POPULAR CLASS so, sign up A.S.A.P. No refunds for cancellations/reschedules within 7 days of class date.

Square Board Fundamentals

Thursday, October 23, 6 PM - 10 PM

HANDS-ON. Got rough boards? Want to learn the simple steps needed to machine that board square, flat and the correct thickness to build something? Then this is the perfect hands-on class for you. Howard will teach the basics of wood technology and stock preparation. This fun, quick class will cover the use of the table saw, jointer and thickness planer. Students will also learn which side of the board should be used for the outside of the project and learn how to glue up a panel without it cupping. DON'T UNDER ESTIMATE THIS CLASS!!...it is a "MUST TAKE" for anyone buying rough cut lumber. This class fills quickly so, sign up A.S.A.P. No refunds for cancellations/reschedules within 7 days of class date.

Basic Woodworking

Part 1: Saturday, October 25, 9 AM - 6 PM

Part 2: Sunday, October 26, 9 AM - 6 PM

HANDS-ON. OUR MOST POPULAR CLASS!! ADULTS ONLY - NO YOUTH - 18 YEARS AND OLDER. This foundation course introduces you to the wonderful world of woodworking. You will learn how to set alignment and use the chop saw, table saw, jointer, planner, band saw, router table and a stationary sander. Safety will be emphasized with each machine. Each student will complete a hands-on project using basic joinery techniques. Types of wood and finishing techniques will also be discussed. This is a great class and it fills quickly every month so, sign up A.S.A.P. No refunds for cancellations/reschedules within 7 days of class date.

Build An End-Grain Cutting Board

Part 1: Monday, October 27, 6 PM - 10 PM

Part 2: Tuesday, October 28, 6 PM - 10 PM

Part 3: Wednesday, October 29, 6 PM - 10 PM

HANDS-ON. We have a GREAT KITCHEN CLASS from Doug Jones. Students will build, over the three nights, an End-Grain style Cutting Board from two contrasting types of wood. This 12" X 18" Cutting Board will be constructed from "End-Grain", not the Long-Grain of the boards. This traditional method of building a Cutting Board makes it VERY DURABLE. It will takes cuts from a knife and not show any damage for many years to come. Doug is a great woodworker and his hands-on approach to teaching will help you learn all the tricks for End-Grain cutting and glue-up. You will also learn many valuable machining tips that will help you in all your woodworking projects. This new class will be a very popular and fill quickly so, sign up A.S.A.P. No refunds for cancellations/reschedules within 7 days of class date.

Band Saw Basics

Thursday, October 30, 6 PM - 10 PM

HANDS-ON. ATTENTION ANYONE THAT HAS A BAND SAW! Are you a beginner or old-timer and have a Band Saw and not sure if it is working just right? Then this is the perfect class for you. This class will begin at "step one" on Band Saw setup and tuneup. Wheel alignment, blade selection, blade installation, cool blocks vs bearing guides and fine tuning will all be covered. Each student will do a setup and then cut a piece of perfect veneer. DON'T UNDERESTIMATE THIS CLASS! It is a MUST TAKE for anyone, beginner or old-timer, that uses this great machine. This promises to be a very popular class and will fill quickly so, sign up A.S.A.P. No refunds for cancellations/reschedules within 7 days of class date.

Basic Woodworking

Part 1: Saturday, November 1, 9 AM - 6 PM

Part 2: Sunday, November 2, 9 AM - 6 PM

HANDS-ON. OUR MOST POPULAR CLASS!! ADULTS ONLY - NO YOUTH - 18 YEARS AND OLDER. This foundation course introduces you to the wonderful world of woodworking. You will learn how to set alignment and use the chop saw, table saw, jointer, planner, band saw, router table and a stationary sander. Safety will be emphasized with each machine. Each student will complete a hands-on project using basic joinery techniques. Types of wood and finishing techniques will also be discussed. This is a great class and it fills quickly every month so, sign up A.S.A.P. No refunds for cancellations/reschedules within 7 days of class date.

Router Basics

Part 1: Tuesday, November 4, 6 PM - 10 PM

Part 2: Wednesday, November 5, 6 PM - 10 PM

HANDS-ON. We have a great class that will teach all the ins-and-outs of how to use your Router. Both Router table work and hand-held Router work will be covered. Students will get hands-on experience and build a small storage box during this informative class. You will learn different techniques of cut, fence and miter gauge work, Router bit selection and basic Router safety. Cutting dados, rabbets, slots, mitered corners and edge trim will be easy. This is a VERY POPULAR class and will fill quickly so, sign up A.S.A.P. No refunds for cancellations/reschedules within 7 days of class date.

Band Saw Basics

Friday, November 7, 6 PM - 10 PM

HANDS-ON. ATTENTION ANYONE THAT HAS A BAND SAW! Are you a beginner or old-timer and have a Band Saw and not sure if it is working just right? Then this is the perfect class for you. This class will begin at "step one" on Band Saw setup and tuneup. Wheel alignment, blade selection, blade installation, cool blocks vs bearing guides and fine tuning will all be covered. Each student will do a setup and then cut a piece of perfect veneer. DON'T UNDERESTIMATE THIS CLASS! It is a MUST TAKE for anyone, beginner or old-timer, that uses this great machine. This promises to be a very popular class and will fill quickly so, sign up A.S.A.P. No refunds for cancellations/reschedules within 7 days of class date.

Raised Panel Doors

Saturday, November 8, 9 AM - 6 PM

HANDS-ON. Students will learn two great methods for making a raised panel door. Learn features for rail and stile design and the many looks the panel can have. Each student will make two small raised panel doors - one with the table saw and one with the router table. Students will receive a notebook outlining both methods. No refunds for cancellations/reschedules within 7 days of class date.

Build A Spline Corner Keepsake Box

Sunday, November 9, 9 AM - 6 PM

HANDS-ON. Mark Seay has come up with a great Table Saw Box Class. Mark is a wonderful teacher and his hands-on style of teaching really helps everyone learn about "how" to do woodworking! Students will make a small Keepsake Box from two contrasting woods on the table saw. The little box will have spline cut corners with contrasting wood splines to give it strength. The contrasting splines will give the box an extra sharp look. This is a really great looking little box and would make a wonderful gift for that someone special. No refunds for cancellations/reschedules within 7 days of class date.

Basic Turning

Part 1: Monday, November 10, 6 PM - 10 PM

Part 2: Tuesday, November 11, 6 PM - 10 PM

Part 3: Wednesday, November 12, 6 PM - 10 PM

HANDS-ON. Paul DeMars will teach this dynamic and fundamental, "3-session", class for all beginning turners. Session #1: Spindle Turning. This class is geared to help you get started on the lathe. Tool selection, handling, safety and machine basics will be covered. You will learn how to make cuts to produce beads, coves and other basic spindle shapes. Session #2: Bowl Turning/Face Grain. Perfect your basic skills by learning to turn a wooden bowl. Face plate turning, tool selection, techniques, sanding and finishing will be covered. Session #3: Bowl Turning/End- Grain. Learn to turn another style of bowl by it's end-grain. End-grain bowls are very different than face-grain bowls and will allow you to expand your turning skills. Paul is a great teacher and will provide each student with hands-on skills that will last a lifetime. No refunds for cancellations/reschedules within 7 days of class date.

Turn A Lidded Box

Part 1: Thursday, November 13, 6 PM - 10 PM

Part 2: Friday, November 14, 6 PM - 10 PM

HANDS-ON. PLEASE NO BEGINNERS. BASIC TURNING SKILLS NEEDED. We have a new Turning Class that will be a big hit! Michael Boyle will provide hands-on teaching as each student turns a small "coke-can" size box with a fitted lid. You will learn how to cut the lid off the main bowl body and then cut a lip on the lid, just right so, it "SNAPS" into place. This is a fun lathe project and will teach you valuable turning skills that will last a life time. Space is limited so, sign up A.S.A.P. No refunds for cancellations/reschedules within 7 days of class date.

Basic Pen Turning Class

Saturday, November 15, 9 AM - 5 PM

HANDS-ON. 14 Years and older, under 18 must be accompanied by an adult. We have a new Pen Instructor! Join Chuck Silber as he brings the world of pen turning to life. Pen turning on the lathe is a great hobby that can also make extra money. Chuck has a great hands-on approach to teaching and will show students all the steps of how to set up your lathe with the right mandrel and bushings for easy pen turning with great results. You will leave the class with a top notch looking pen and the skills needed to make many more. No refunds for cancellations/reschedules within 7 days of class date.

Lathe Tool Sharpening Made Easy

Sunday, November 16, 1 PM - 4 PM

HANDS-ON. This is a simple but, GREAT CLASS for anyone who struggles with sharpening their lathe tools. Are you confused with all the different grind angles and which power tools to use? This is the perfect class for you. Michael will provide hands-on teaching for everyone to use the bench grinder and get great results. No refunds for cancellations/reschedules within 7 days of class date.

Build a Epoxy Resin Charcuterie Board

Part 1: Monday, November 17, 6 PM - 10 PM

Part 2: Tuesday, November 18, 6 PM - 10 PM

Part 3: Friday, November 21, 6 PM - 10 PM

HANDS-ON. Our customers have asked for this class so, here we go!!! Our Cutting Board Class Teacher, Doug Jones, has an awesome new class that will teach you how to combine Wood with the amazing Epoxy Pour Resins. Students will learn how the epoxy molds work, how to mix the epoxy and add color to create a one-of-a-kind Charcuterie /Cutting Board. The finish Board will measure about 1 x 8 x 18 inches. All Materials will be supplied in the class. This will be a VERY POPULAR CLASS so, sign up A.S.A.P. No refunds for cancellations/reschedules within 7 days of class date.

Basic Woodworking

Part 1: Saturday, November 22, 9 AM - 6 PM

Part 2: Sunday, November 23, 9 AM - 6 PM

HANDS-ON. OUR MOST POPULAR CLASS!! ADULTS ONLY - NO YOUTH - 18 YEARS AND OLDER. This foundation course introduces you to the wonderful world of woodworking. You will learn how to set alignment and use the chop saw, table saw, jointer, planner, band saw, router table and a stationary sander. Safety will be emphasized with each machine. Each student will complete a hands-on project using basic joinery techniques. Types of wood and finishing techniques will also be discussed. This is a great class and it fills quickly every month so, sign up A.S.A.P. No refunds for cancellations/reschedules within 7 days of class date.

Turn A Pepper Mill

Part 1: Monday, November 24, 6 PM - 10 PM

Part 2: Tuesday, November 25, 6 PM - 10 PM

HANDS-ON. Doug has another great class for all our Turners. Spend the day with us and take home a wonderful 10" - 12" tall Pepper Mill. Paul will provide hands-on instruction as each student turns, applies the food safe finish and installs a metal style grinder unit. This will be a very popular class so sign up A.S.A.P. No refunds for cancellations/reschedules within 7 days of class date.

Cabinet Making For Beginners

Saturday, November 29, 9 AM - 6 PM

LECTURE/DEMO. This is the perfect sister class for our popular Raised Panel Door Class. In this Lecture/Demo, students will learn how to build first-class looking cabinets for the kitchen, laundry room, bathroom or workshop. Learn how to build both the upper and lower units and how to install them for that perfect fit. Various joinery methods will be shown including Kreg Pocket Holes and Biscuits. Learn how to install Euro-style hinges with or without a face-frame, and also learn the tricks of the trade to installing drawer glides. This is a great class... don't miss it! No refunds for cancellations/reschedules within 7 days of class date.

Finishing For The Home Shop

Sunday, November 30, 9 AM - 6 PM

LECTURE/DEMO. Confused with all the different ways to finish your project? Learn simple "old world" finishing from a student of Fine Woodworking's contributing editor and woodworking master, Tage Frid. This class will teach the four finishes that will easily work for the home shop. Demos will show how to prepare the wood for finishing, using everything from the thickness planer, to cabinet scraper, to the proper way to use sandpaper. Then learn the easy steps to apply a traditional oil finish, spray lacquer, varnish and French polish. Students will receive handy take-home notes detailing each of these finishes. No refunds for cancellations/reschedules within 7 days of class date.

Build An End-Grain Cutting Board

Part 1: Monday, December 1, 6 PM - 10 PM

Part 2: Tuesday, December 2, 6 PM - 10 PM

Part 3: Wednesday, December 3, 6 PM - 10 PM

HANDS-ON. We have a GREAT KITCHEN CLASS from Doug Jones. Students will build, over the three nights, an End-Grain style Cutting Board from two contrasting types of wood. This 12" X 18" Cutting Board will be constructed from "End-Grain", not the Long-Grain of the boards. This traditional method of building a Cutting Board makes it VERY DURABLE. It will takes cuts from a knife and not show any damage for many years to come. Doug is a great woodworker and his hands-on approach to teaching will help you learn all the tricks for End-Grain cutting and glue-up. You will also learn many valuable machining tips that will help you in all your woodworking projects. This new class will be a very popular and fill quickly so, sign up A.S.A.P. No refunds for cancellations/reschedules within 7 days of class date.

Band Saw Basics

Thursday, December 4, 6 PM - 10 PM

HANDS-ON. ATTENTION ANYONE THAT HAS A BAND SAW! Are you a beginner or old-timer and have a Band Saw and not sure if it is working just right? Then this is the perfect class for you. This class will begin at "step one" on Band Saw setup and tuneup. Wheel alignment, blade selection, blade installation, cool blocks vs bearing guides and fine tuning will all be covered. Each student will do a setup and then cut a piece of perfect veneer. DON'T UNDERESTIMATE THIS CLASS! It is a MUST TAKE for anyone, beginner or old-timer, that uses this great machine. This promises to be a very popular class and will fill quickly so, sign up A.S.A.P. No refunds for cancellations/reschedules within 7 days of class date.

Square Board Fundamentals

Friday, December 5, 6 PM - 10 PM

HANDS-ON. Got rough boards? Want to learn the simple steps needed to machine that board square, flat and the correct thickness to build something? Then this is the perfect hands-on class for you. Howard will teach the basics of wood technology and stock preparation. This fun, quick class will cover the use of the table saw, jointer and thickness planer. Students will also learn which side of the board should be used for the outside of the project and learn how to glue up a panel without it cupping. DON'T UNDER ESTIMATE THIS CLASS!!...it is a "MUST TAKE" for anyone buying rough cut lumber. This class fills quickly so, sign up A.S.A.P. No refunds for cancellations/reschedules within 7 days of class date.

Basic Woodworking

Part 1: Saturday, December 6, 9 AM - 6 PM

Part 2: Sunday, December 7, 9 AM - 6 PM

HANDS-ON. OUR MOST POPULAR CLASS!! ADULTS ONLY - NO YOUTH - 18 YEARS AND OLDER. This foundation course introduces you to the wonderful world of woodworking. You will learn how to set alignment and use the chop saw, table saw, jointer, planner, band saw, router table and a stationary sander. Safety will be emphasized with each machine. Each student will complete a hands-on project using basic joinery techniques. Types of wood and finishing techniques will also be discussed. This is a great class and it fills quickly every month so, sign up A.S.A.P. No refunds for cancellations/reschedules within 7 days of class date.

Basic Turning

Part 1: Monday, December 8, 6 PM - 10 PM

Part 2: Tuesday, December 9, 6 PM - 10 PM

Part 3: Wednesday, December 10, 6 PM - 10 PM

HANDS-ON. Paul DeMars will teach this dynamic and fundamental, "3-session", class for all beginning turners. Session #1: Spindle Turning. This class is geared to help you get started on the lathe. Tool selection, handling, safety and machine basics will be covered. You will learn how to make cuts to produce beads, coves and other basic spindle shapes. Session #2: Bowl Turning/Face Grain. Perfect your basic skills by learning to turn a wooden bowl. Face plate turning, tool selection, techniques, sanding and finishing will be covered. Session #3: Bowl Turning/End- Grain. Learn to turn another style of bowl by it's end-grain. End-grain bowls are very different than face-grain bowls and will allow you to expand your turning skills. Paul is a great teacher and will provide each student with hands-on skills that will last a lifetime. No refunds for cancellations/reschedules within 7 days of class date.

Basic Bowl Turning and Design

Part 1: Thursday, December 11, 6 PM - 10 PM

Part 2: Friday, December 12, 6 PM - 10 PM

HANDS-ON. PLEASE NO BEGINNERS. BASIC TURNING SKILLS NEEDED. We have a Great Turning Class for anyone interested in learning how to turn a bowl. Michael will provide hands-on teaching as each students turns a medium-size bowl about 5-6 inches in diameter. Students will learn how to mount a bowl blank to the lathe using several different methods and which tools to use and how to use them to make clean efficient cuts. This class also will cover the various types of finish, including oils, friction polish and even just buffing with wax. This will be a very popular class so, Sign-up A.S.A.P. No refunds for cancellations/reschedules within 7 days of class date.

Basic Pen Turning Class

Saturday, December 13, 9 AM - 5 PM

HANDS-ON. 14 Years and older, under 18 must be accompanied by an adult. We have a new Pen Instructor! Join Chuck Silber as he brings the world of pen turning to life. Pen turning on the lathe is a great hobby that can also make extra money. Chuck has a great hands-on approach to teaching and will show students all the steps of how to set up your lathe with the right mandrel and bushings for easy pen turning with great results. You will leave the class with a top notch looking pen and the skills needed to make many more. No refunds for cancellations/reschedules within 7 days of class date.

Build A Spline Corner Keepsake Box

Sunday, December 14, 9 AM - 6 PM

HANDS-ON. Mark Seay has come up with a great Table Saw Box Class. Mark is a wonderful teacher and his hands-on style of teaching really helps everyone learn about "how" to do woodworking! Students will make a small Keepsake Box from two contrasting woods on the table saw. The little box will have spline cut corners with contrasting wood splines to give it strength. The contrasting splines will give the box an extra sharp look. This is a really great looking little box and would make a wonderful gift for that someone special. No refunds for cancellations/reschedules within 7 days of class date.

Build a Epoxy Resin Charcuterie Board

Part 1: Monday, December 15, 6 PM - 10 PM

Part 2: Tuesday, December 16, 6 PM - 10 PM

Part 3: Friday, December 19, 6 PM - 10 PM

HANDS-ON. Our customers have asked for this class so, here we go!!! Our Cutting Board Class Teacher, Doug Jones, has an awesome new class that will teach you how to combine Wood with the amazing Epoxy Pour Resins. Students will learn how the epoxy molds work, how to mix the epoxy and add color to create a one-of-a-kind Charcuterie /Cutting Board. The finish Board will measure about 1 x 8 x 18 inches. All Materials will be supplied in the class. This will be a VERY POPULAR CLASS so, sign up A.S.A.P. No refunds for cancellations/reschedules within 7 days of class date.

Router Basics

Part 1: Wednesday, December 17, 6 PM - 10 PM

Part 2: Thursday, December 18, 6 PM - 10 PM

HANDS-ON. We have a great class that will teach all the ins-and-outs of how to use your Router. Both Router table work and hand-held Router work will be covered. Students will get hands-on experience and build a small storage box during this informative class. You will learn different techniques of cut, fence and miter gauge work, Router bit selection and basic Router safety. Cutting dados, rabbets, slots, mitered corners and edge trim will be easy. This is a VERY POPULAR class and will fill quickly so, sign up A.S.A.P. No refunds for cancellations/reschedules within 7 days of class date.

Basic Woodworking

Part 1: Saturday, December 20, 9 AM - 6 PM

Part 2: Sunday, December 21, 9 AM - 6 PM

HANDS-ON. OUR MOST POPULAR CLASS!! ADULTS ONLY - NO YOUTH - 18 YEARS AND OLDER. This foundation course introduces you to the wonderful world of woodworking. You will learn how to set alignment and use the chop saw, table saw, jointer, planner, band saw, router table and a stationary sander. Safety will be emphasized with each machine. Each student will complete a hands-on project using basic joinery techniques. Types of wood and finishing techniques will also be discussed. This is a great class and it fills quickly every month so, sign up A.S.A.P. No refunds for cancellations/reschedules within 7 days of class date.

Turn A Pepper Mill

Part 1: Monday, December 22, 6 PM - 10 PM

Part 2: Tuesday, December 23, 6 PM - 10 PM

HANDS-ON. Doug has another great class for all our Turners. Spend the day with us and take home a wonderful 10" - 12" tall Pepper Mill. Paul will provide hands-on instruction as each student turns, applies the food safe finish and installs a metal style grinder unit. This will be a very popular class so sign up A.S.A.P. No refunds for cancellations/reschedules within 7 days of class date.

Hand Tool Basics & Sharpening

Saturday, December 27, 9 AM - 6 PM

HANDS-ON. Chisels, scrapers, planes and saws are the most fundamental woodworking tools in the shop. Howard will provide hands-on instruction on how to sharpen, adjust and use each of these great tools. Students will practice "old world" basic exercises with each tool. Tool #1: Learn basic chisel techniques and how to cut a mortise for a hinge faster than any machine takes to set up. Tool #2: Learn how to use a cabinet scraper as a step toward applying a fine finish. Tool #3: Learn how great using a hand plane can be. Plane an edge straight, flatten a board and cut chamfers with ease. Tool #4: Sharpen and reset your dovetail saw so it cuts perfectly. Learn simple exercises that will give you great confidence with your saw. This is a wonderful hands-on class that anyone interested in hand tools will enjoy. Bring your own tools or buy new ones and leave this class knowing how to correctly use them on your next project. Please bring your own tools: 3/8" or 1/2" Chisel, Cabinet Scraper (Card Scraper), Hand Plane (#3 or #4 or #5) or any type of Block Plane and a Dovetail type Saw. NOTE: THIS IS NOT A RESTORATION CLASS. Tools Need To Be In Working Order. Please No Old Or Rusted Hand Tools That Could Need A Lot Of Work. No refunds for cancellations/reschedules within 7 days of class date.

Square Board Fundamentals

Monday, December 29, 6 PM - 10 PM

HANDS-ON. Got rough boards? Want to learn the simple steps needed to machine that board square, flat and the correct thickness to build something? Then this is the perfect hands-on class for you. Howard will teach the basics of wood technology and stock preparation. This fun, quick class will cover the use of the table saw, jointer and thickness planer. Students will also learn which side of the board should be used for the outside of the project and learn how to glue up a panel without it cupping. DON'T UNDER ESTIMATE THIS CLASS!!...it is a "MUST TAKE" for anyone buying rough cut lumber. This class fills quickly so, sign up A.S.A.P. No refunds for cancellations/reschedules within 7 days of class date.