Woodcraft of Atlanta

503_Kumiko_Lantern.jpg

$380.00

Beginner/Intermediate

Kumiko Lantern

with Deana Spencer

Part 1: Saturday, December 13, 2025, 9 AM - 5 PM

Part 2: Sunday, December 14, 2025, 9 AM - 5 PM

Required Tools

Kumiko is a quiet and thoughtful technique that requires patience and precision. The ancient Japanese woodworking technique consists of making patterns from small pieces of interlocking wood. In this course, your instructor would walk you through the steps needed to create delicate pieces of art with wood. Discover how to seamlessly blend art and craftsmanship by mastering the use of geometry, patterns, and clean lines. Take your woodworking skill to the next level. By the end of the course every student will have created a beautiful lantern with a Kumiko pattern on the sizes.

503_Andromeda.jpg

$75.00

Beginner

Turning Holliday Ornaments

with David Bosch

Wednesday, December 17, 2025, 6 PM - 9 PM

Required Tools

Explore the artistry of woodturning in our holiday ornament-making class! Open to kids ages 10 and up as well as adults, this hands-on experience lets each participant create a unique ornament, choosing from a variety of woods and designs. Whether you're a beginner or experienced woodturner, you'll learn to transform raw wood into festive treasures—perfect for your tree or as heartfelt handmade gifts. This class blends creativity and craftsmanship, adding a touch of homemade charm to your holiday season.

503_Santa.jpg

$125.00

All Levels

Wood Carving

with Steve Wilensky

Saturday, December 20, 2025, 9 AM - 5 PM

Required Tools

In Out of My Mind Carving with Steve Wilensky, participants will learn from a master carver with a unique talent for revealing whimsical characters hidden within any piece of wood. Steve’s approach is all about creativity and intuition—guiding each student to carve out the figure that “wants to come out” of the wood. The day begins with an overview of essential skills, including how to handle, manipulate, and keep carving tools sharp while prioritizing safety. With Steve’s expert guidance, students will enjoy the peaceful rhythm of carving, allowing their imaginations to shape delightful, one-of-a-kind characters. This relaxing class is perfect for anyone eager to explore the art of whimsical woodcarving in an inspiring, hands-on environment.

503_Cutting_Boards_&_Cheese_Slicer.jpg

$160.00

All Levels

Cutting Boards & Cheese Slicer

with Milton Miller

Saturday, December 20, 2025, 9 AM - 5 PM

Required Tools

Elevate your holiday season with a personalized gift-making workshop. Create your own unique cutting board and cheese slicer from start to finish. Explore the use of tools like the Planer, Drum Sander, Bandsaw, Disc & Spindle Sander, and Hand Router, gaining hands-on experience throughout the day. Discover the secrets of crafting a segmented cutting board, mastering clamping techniques, and selecting the perfect finish to make a memorable gift.

503_WW1.jpg

$380.00

Beginner

Introduction to Woodworking I

with Terry Nielsen

Part 1: Saturday, January 3, 2026, 9 AM - 5 PM

Part 2: Sunday, January 4, 2026, 9 AM - 5 PM

Required Tools

With Intro to Woodworking I, the student will learn the basic aspects, safety measures and uses of power tools and furniture assembly procedures. You will complete a small wall hanging cabinet. You will gain hands-on experience with basic joinery' how to "4 square" a board as well as hardware installation by the end of the last session.

503_Small_Bowl.jpg

$75.00

Beginner

Turning Night

with David Bosch

Tuesday, January 6, 2026, 6 PM - 9 PM

Required Tools

In this class, you'll craft a beautiful small bowl approximately 4 inches in diameter—perfect for holding condiments, spices, or other kitchen essentials. This beginner-friendly project offers endless creative possibilities and allows you to add a unique, handcrafted touch to your kitchen décor.

503_Hand_Tools_1.png

$75.00

Beginner

Hand Tools Session 1 - Sharpening & Tool Setup

with Robert Stebbins

Tuesday, January 6, 2026, 6 PM - 9 PM

Required Tools

Sharp tools are essential for fine woodworking. Learn to sharpen and tune chisels and hand planes to a razor edge using waterstones or diamond plates. Students will leave with their tools cutting cleanly and ready for precision work. Prerequisite: None – perfect starting point for beginners. Participants who enroll in the 5-part program will receive a $125 credit applicable to WoodRiver hand tools.. Materials Included with the Tuition.

503_Hand_Tools_2.png

$75.00

Beginner

Hand Tools Session 2 - Planing & Jointing Techniques

with Robert Stebbins

Thursday, January 8, 2026, 6 PM - 9 PM

Required Tools

Learn to flatten, square, and smooth boards using hand planes. Practice reading grain direction, preventing tear-out, and achieving glass-smooth surfaces. This class focuses on proper stance, setup, and control for accurate, efficient planing. Participants who enroll in the 5-part program will receive a $125 credit applicable to WoodRiver hand tools.. Materials Included with the Tuition.

503_Table_Saw.jpg

$165.00

Intermediate

Table Saw Basics & Techniques

with Terry Nielsen

Friday, January 9, 2026, 9 AM - 5 PM

Required Tools

Terry will teach you how to use a table saw safely and accurately. Each student will have the opportunity to practice many table saw operations including cross cutting, ripping and taper cuts. The student will also make a basic crosscut sled. Terry will go over how to install the sliders so their sled will make accurate crosscuts. He will discuss the advantages/disadvantages of the various types of sliders available so the student can decide which type suits their needs and make a purchase accordingly.

503_WW1-ed.jpg

$380.00

Beginner

Introduction to Woodworking I

with Ed Proctor

Part 1: Saturday, January 10, 2026, 9 AM - 5 PM

Part 2: Sunday, January 11, 2026, 9 AM - 5 PM

Required Tools

With Intro to Woodworking I, the student will learn the basic aspects, safety measures and uses of power tools and furniture assembly procedures. You will complete a small wall hanging cabinet. You will gain hands-on experience with basic joinery' how to "4 square" a board as well as hardware installation by the end of the last session.

503_Staining1.jpg

$160.00

All Levels

Wood Staining

with Milton Miller

Part 1: Monday, January 12, 2026, 6 PM - 9 PM

Part 2: Tuesday, January 13, 2026, 6 PM - 9 PM

Required Tools

In this class, held over two evenings, students will gain hands-on experience using different stains and dyes. The focus will be on both preparation and application techniques, ensuring that students develop a systematic approach to wood staining. By the end of the course, participants will be able to achieve predictable and consistent results. Students are encouraged to wear old clothes that can get messy, and gloves will be provided for protection.

503_Hand_Tools_3.png

$75.00

Beginner

Hand Tools Session 3 - Sawing & Chisel Fundamentals

with Robert Stebbins

Tuesday, January 13, 2026, 6 PM - 9 PM

Required Tools

Develop clean, accurate cuts with hand saws and controlled chisel work. Learn to mark, saw, and pare to the line, preparing you for traditional joinery. Techniques include proper sawing stance, stroke, and chisel paring methods. Participants who enroll in the 5-part program will receive a $125 credit applicable to WoodRiver hand tools.. Materials Included with the Tuition.

503_Hand_Tools_4.png

$75.00

Beginner

Hand Tools Session 4 - Dovetail & Joinery Practice

with Robert Stebbins

Thursday, January 15, 2026, 6 PM - 9 PM

Required Tools

Bring your sawing and chisel skills together to learn the hallmark joint of fine woodworking — the dovetail. Practice layout, cutting, and fitting through-dovetails with precision and confidence. Participants who enroll in the 5-part program will receive a $125 credit applicable to WoodRiver hand tools.. Materials Included with the Tuition.

503_Santa.jpg

$125.00

All Levels

Wood Carving

with Steve Wilensky

Saturday, January 17, 2026, 9 AM - 5 PM

Required Tools

In Out of My Mind Carving with Steve Wilensky, participants will learn from a master carver with a unique talent for revealing whimsical characters hidden within any piece of wood. Steve’s approach is all about creativity and intuition—guiding each student to carve out the figure that “wants to come out” of the wood. The day begins with an overview of essential skills, including how to handle, manipulate, and keep carving tools sharp while prioritizing safety. With Steve’s expert guidance, students will enjoy the peaceful rhythm of carving, allowing their imaginations to shape delightful, one-of-a-kind characters. This relaxing class is perfect for anyone eager to explore the art of whimsical woodcarving in an inspiring, hands-on environment.

503_WWII.jpg

$380.00

Intermediate

Introduction to Woodworking II

with Terry Nielsen

Part 1: Saturday, January 17, 2026, 9 AM - 5 PM

Part 2: Sunday, January 18, 2026, 9 AM - 5 PM

Required Tools

In this class, the Student will expand upon what they have already learned by using the bandsaw and router, in addition to the tools learned in the previous class, to build a Shaker Side Table. The student will learn how to make the mortise and tenon joint using the Festool Domino tool, a simple Dovetail Drawer, as well as how to add a taper to a leg.

503_Pen.jpg

$85.00

Beginner

Pen Turning Fundamentals

with David Bosch

Tuesday, January 20, 2026, 5 PM - 9 PM

Required Tools

Take your wood lathe skills to the next level by turning a writing pen from a wooden blank. Processes for turning to high tolerances will be learned as well as sanding and finishing fundamentals. Students will leave with a pen they can be proud of and use for years to come. All materials are included.

503_Hand_Tools_5.png

$300.00

Beginner

Hand Tools Workshop - Dovetail Box

with Robert Stebbins

Part 1: Tuesday, January 20, 2026, 6 PM - 9 PM

Part 2: Thursday, January 22, 2026, 6 PM - 9 PM

Part 3: Tuesday, January 27, 2026, 6 PM - 9 PM

Part 4: Thursday, January 29, 2026, 6 PM - 9 PM

Required Tools

Apply everything you’ve learned in this hands-on capstone project. Over four sessions, you’ll design, cut, and assemble a small dovetailed box using only hand tools. From flattening boards to hand-cutting joinery and applying a fine finish, this project ties all the fundamentals together. Participants who enroll in the 5-part program will receive a $125 credit applicable to WoodRiver hand tools.. Materials Included with the Tuition.

503_Cutting.png

$165.00

Intermediate

Cutting Boards

with Milton Miller

Friday, January 23, 2026, 9 AM - 5 PM

Required Tools

The instructor will guide the student through the choosing of the right hardwood all the way to what finish to put on your completed cutting board. You will be using the Planer, Drum Sander, Bandsaw, Disc & Spindle Sander & Hand Router by end of day. The instructor will teach you how to properly glue up a segmented cutting board, how to clamp w/ even pressure & choose the best finish.

503_Intro_Spindles.png

$120.00

Beginner

Introduction to the Wood Lathe

with David Bosch

Saturday, January 24, 2026, 9 AM - 5 PM

Required Tools

Have you ever wanted to try turning on a wood lathe? Join us in this introductory class and learn about the lathe and associated tools. Not only will you learn proper processes for spindle turning on the lathe safely and effectively, but you’ll also go home with an attractive candlestick holder. Use the basic skills from this class to move on to other turning classes like pen and bowl turning. All materials are included.

503_Kumiko_Panel.jpg

$165.00

Beginner/Intermediate

Intro to Kumiko

with Deana Spencer

Saturday, January 24, 2026, 9 AM - 5 PM

Required Tools

Kumiko is a quiet and thoughtful technique that requires patience and precision. The ancient Japanese woodworking technique consists of making patterns from small pieces of interlocking wood. In this course, your instructor would walk you through the steps needed to create delicate pieces of art with wood. Discover how to seamlessly blend art and craftsmanship by mastering the use of geometry, patterns, and clean lines. Take your woodworking skill to the next level. By the end of the course every student will have created a small panel with a Kumiko pattern.

503_Bowls.png

$150.00

Beginner

Turning Wooden Bowls

with David Bosch

Sunday, January 25, 2026, 9 AM - 5 PM

Required Tools

In this class you will learn the processes for safely turning a wooden bowl on the lathe. You will complete an attractive bowl that’s about six inches in diameter and two inches deep. It is HIGHLY recommended that you take the Introduction to the Wood Lathe class prior to enrolling in this class as we will be building on the skills learned in the intro class. All materials are included.

503_Coasters.jpg

$100.00

All Levels

Resin Coaster

with Tricia Haberman

Wednesday, January 28, 2026, 5 PM - 9 PM

Required Tools

In this hands-on workshop, participants will craft a set of six beautiful epoxy resin coasters featuring dried flowers, with the option to personalize their creations using a wide range of colors. The finished coasters will be completed with a protective cork backing and elegantly packaged in a transparent white organza gift bag. Throughout the session, participants will gain a solid understanding of different types of epoxy resin and how to choose the right one for their project. They will also learn how to use silicone molds effectively, mix epoxy resin and hardener accurately for optimal consistency, and master techniques to minimize air bubbles during the curing process to achieve a flawless, professional finish.

503_WW1.jpg

$380.00

Beginner

Introduction to Woodworking I

with Terry Nielsen

Part 1: Saturday, January 31, 2026, 9 AM - 5 PM

Part 2: Sunday, February 1, 2026, 9 AM - 5 PM

Required Tools

With Intro to Woodworking I, the student will learn the basic aspects, safety measures and uses of power tools and furniture assembly procedures. You will complete a small wall hanging cabinet. You will gain hands-on experience with basic joinery' how to "4 square" a board as well as hardware installation by the end of the last session.

503_Router.jpg

$165.00

Intermediate

Router Basics & Techniques

with Terry Nielsen

Friday, February 6, 2026, 9 AM - 5 PM

Required Tools

Learn how to set-up the handheld router and router table to make different types of cuts that are used in making furniture, cabinets, boxes and other woodworking. These techniques will be used to demonstrate several project examples. This class is valuable for everyone from the beginner to the more experienced woodworker wanting to brush up on his or her router and router table skills

503_WW1-ed.jpg

$380.00

Beginner

Introduction to Woodworking I

with Ed Proctor

Part 1: Saturday, February 7, 2026, 9 AM - 5 PM

Part 2: Sunday, February 8, 2026, 9 AM - 5 PM

Required Tools

With Intro to Woodworking I, the student will learn the basic aspects, safety measures and uses of power tools and furniture assembly procedures. You will complete a small wall hanging cabinet. You will gain hands-on experience with basic joinery' how to "4 square" a board as well as hardware installation by the end of the last session.

503_Intro_Spindles.png

$135.00

Beginner

Introduction to the Wood Lathe

with David Bosch

Saturday, February 7, 2026, 9 AM - 5 PM

Required Tools

Have you ever wanted to try turning on a wood lathe? Join us in this introductory class and learn about the lathe and associated tools. Not only will you learn proper processes for spindle turning on the lathe safely and effectively, but you’ll also go home with an attractive candlestick holder. Use the basic skills from this class to move on to other turning classes like pen and bowl turning. All materials are included.

503_Santa.jpg

$125.00

All Levels

Wood Carving

with Steve Wilensky

Saturday, February 7, 2026, 9 AM - 5 PM

Required Tools

In Out of My Mind Carving with Steve Wilensky, participants will learn from a master carver with a unique talent for revealing whimsical characters hidden within any piece of wood. Steve’s approach is all about creativity and intuition—guiding each student to carve out the figure that “wants to come out” of the wood. The day begins with an overview of essential skills, including how to handle, manipulate, and keep carving tools sharp while prioritizing safety. With Steve’s expert guidance, students will enjoy the peaceful rhythm of carving, allowing their imaginations to shape delightful, one-of-a-kind characters. This relaxing class is perfect for anyone eager to explore the art of whimsical woodcarving in an inspiring, hands-on environment.

503_Small_Bowl.jpg

$75.00

Beginner

Turning Night

with David Bosch

Wednesday, February 11, 2026, 6 PM - 9 PM

Required Tools

In this class, you'll craft a beautiful small bowl approximately 4 inches in diameter—perfect for holding condiments, spices, or other kitchen essentials. This beginner-friendly project offers endless creative possibilities and allows you to add a unique, handcrafted touch to your kitchen décor.

503_Chopsitcks.jpg

$120.00

All Levels

Date Night

with Woodcraft Instructor

Thursday, February 12, 2026, 6 PM - 9 PM

Required Tools

In this Date Night Woodworking project, couples, families, and friends come together to create a simple, handcrafted item—projects will vary. With guidance from an instructor, participants will enjoy hands-on time sanding, assembling, and finishing their project in a relaxed, fun setting. Perfect for beginners, this workshop offers a unique way to connect, unwind, and create a keepsake to take home and remember the night by.

503_Cabinet_Making.jpg

$420.00

Intermediate

Introduction to Cabinet Making

with Terry Nielsen

Part 1: Saturday, February 14, 2026, 9 AM - 5 PM

Part 2: Sunday, February 15, 2026, 9 AM - 5 PM

Required Tools

In this hands-on class, each student will complete a 15" face frame style base cabinet with drawer and a Shaker-Style door. Cabinet styles and design considerations will be discussed that can be adapted for several different applications including kitchen cabinets, entertainment centers, and bookcases. Construction of the cabinet carcass, face frame and drawer will employ the Kreg Joinery system and construction of the raised panel door will utilize the traditional cope and stick method. Additional joinery techniques for the carcass, face frame, drawer and door will be discussed. You will learn the safe and proper use of the table saw, compound miter saw, router table and finishing sander as you complete the project.

503_Bowls.png

$150.00

Beginner

Turning Wooden Bowls

with David Bosch

Saturday, February 14, 2026, 9 AM - 5 PM

Required Tools

In this class you will learn the processes for safely turning a wooden bowl on the lathe. You will complete an attractive bowl that’s about six inches in diameter and two inches deep. It is HIGHLY recommended that you take the Introduction to the Wood Lathe class prior to enrolling in this class as we will be building on the skills learned in the intro class. All materials are included.

503_Drunken_CB.png

$175.00

Beginner/Intermediate

Wavy Cutting Board

with Milton Miller

Part 1: Monday, February 16, 2026, 6 PM - 9 PM

Part 2: Tuesday, February 17, 2026, 6 PM - 9 PM

Required Tools

You’ll learn how to safely cut and reassemble your board to form smooth, organic wave patterns that look complex but are achievable with proper technique. Along the way, you’ll work with the Planer, Drum Sander, Bandsaw, Disc & Spindle Sander, and Hand Router. You will also learn proper clamping techniques for curved glue-ups, alignment tips to keep patterns seamless, and finishing practices that highlight wood grain and durability.

503_Scroll_Saw.jpg

$165.00

Beginner

Scroll Saw Basics

with Hans Meier

Saturday, February 21, 2026, 9 AM - 5 PM

Required Tools

Scroll-sawing the most popular, rewarding and safest of all woodworking activities. The tool is easy for beginning woodworkers of all ages to create a wide variety of useful and fun items. This class will show you how to set-up and use the saw, select the proper blade for different projects, find or create and use patterns, and to sand and finish your creation. You will practice basic in- and outside cuts to make sticks figures, puzzles, three-dimensional objects, and much more.

503_Pen2.jpg

$95.00

Beginner/Intermediate

Pen Turning "The Next Level"

with David Bosch

Tuesday, February 24, 2026, 5 PM - 9 PM

Required Tools

Ready to take your pen turning skills to the next level? This class is designed for those already familiar with pen turning basics but eager to refine their expertise. Craft a more complex pen from wooden or acrylic blanks. Students will leave with a pen they can be proud of and use for years to come. All materials are included.

503_Ocean_Tiles.png

$60.00

Beginner

Epoxy Coasters - Ocean Wave

with Tricia Haberman

Wednesday, February 25, 2026, 6 PM - 9 PM

Required Tools

Create a set of beautiful beach-themed coasters using epoxy resin, pigments, and layered pouring techniques to mimic ocean waves and sandy shores. In this hands-on class, your instructor will guide you through preparing coaster bases, mixing and tinting epoxy, pouring and shaping realistic wave effects, and adding shimmering accents for depth and movement. You’ll learn safe epoxy handling, color blending, heat-gun wave forming, and finishing techniques to achieve a smooth, high-gloss surface. Leave with a stunning set of coastal-inspired coasters and the confidence to continue creating resin art at home.

503_Seminar.png

$0.00

All Levels

Maximizing Your Bandsaw

with Alex Snodgrass

Thursday, February 26, 2026, 1 PM - 2 PM

Join Alex Snodgrass, the leading authority on the bandsaw, for an in-depth seminar on unlocking the full potential of your bandsaw. Participants will learn how to fine tune a bandsaw for smoother cuts and greater accuracy. He will also demonstrate how Carter Products accessories extend the tool’s range. Guides, mag fence, blades, inserts and a circle cutter will be highlighted for their role in precise and efficient work. The seminar will also include a brief segment on Titebond® glues, focusing on the optimal types for various woodworking projects. This seminar lays the groundwork for Alex’s box building class, offering students the chance to learn directly from a respected authority in woodworking. Sign up NOW! Seating is limited.

503_Class.png

$335.00

All Levels

Build A Pin Box and Two-Drawer Wave Box

with Alex Snodgrass

Friday, February 27, 2026, 9 AM - 5 PM

Renowned bandsaw master Alex Snodgrass will lead a hands-on class devoted to building two striking projects: a four-drawer pin box and a two-drawer wave box. Instruction covers setup, cutting techniques and safe shaping methods while Alex guides participants step by step and answers questions throughout the process. He also reveals the secrets behind his signature designs, including magnetic boxes, push button boxes, the gravity pin box and an articulated snake. Additionally, participants will receive exclusive access to a private video showcasing the completed projects, extending the learning beyond the classroom. By the end of the day, students not only complete two boxes but also gain the rare chance to learn directly from a legend in the craft, leaving with the skills and confidence to create almost any style of bandsaw box. Secure your spot TODAY. Class size is limited to 10.

503_Boxes.jpg

$410.00

Intermediate/Advanced

Shaker Oval Box

with John Jones

Part 1: Saturday, February 28, 2026, 9 AM - 5 PM

Part 2: Sunday, March 1, 2026, 9 AM - 5 PM

Required Tools

Master the art of crafting iconic Shaker Oval Boxes in this immersive 2-day workshop. This class offers an opportunity to refine your skills while creating a set of five beautifully crafted boxes, each ready for staining or finishing. What you’ll learn: Traditional techniques for shaping and bending wood. Carving swallow tails. Proper assembly and construction methods for Shaker-style joinery. Tips for achieving precision and consistency across multiple pieces. Choose from cherry or maple wood for your project, ensuring each box reflects your personal style. By the end of the class, you’ll have a complete nested set of 5 Shaker Oval Boxes, showcasing your craftsmanship and attention to detail.

503_Kumiko_Box.jpg

$380.00

Beginner/Intermediate

Kumiko Tea Box

with Deana Spencer

Part 1: Saturday, February 28, 2026, 9 AM - 5 PM

Part 2: Sunday, March 1, 2026, 9 AM - 5 PM

Required Tools

Kumiko is a quiet and thoughtful technique that requires patience and precision. The ancient Japanese woodworking technique consists of making patterns from small pieces of interlocking wood. In this course, your instructor would walk you through the steps needed to create delicate pieces of art with wood. Discover how to seamlessly blend art and craftsmanship by mastering the use of geometry, patterns, and clean lines. Take your woodworking skill to the next level. By the end of the course every student will have created a small tea box with a Kumiko pattern on the lid.

503_Epoxy_Pouring.png

$165.00

Beginner/Intermediate

Intro to EPOXY Pouring

with Milton Miller

Part 1: Monday, March 2, 2026, 6 PM - 9 PM

Part 2: Tuesday, March 3, 2026, 6 PM - 9 PM

Required Tools

From Countertop to Live Edge Wood Surface and Floors. Epoxy Pouring required preparation, precision, and a good amount of experience and creativity. In this course our instructor will guide you in all steps to create a stunning, glossy finish that highlights the natural beauty of the wood.

503_Small_Bowl.jpg

$75.00

Beginner

Turning Night

with David Bosch

Wednesday, March 4, 2026, 6 PM - 9 PM

Required Tools

In this class, you'll craft a beautiful small bowl approximately 4 inches in diameter—perfect for holding condiments, spices, or other kitchen essentials. This beginner-friendly project offers endless creative possibilities and allows you to add a unique, handcrafted touch to your kitchen décor.

503_WW1.jpg

$380.00

Beginner

Introduction to Woodworking I

with Terry Nielsen

Part 1: Saturday, March 7, 2026, 9 AM - 5 PM

Part 2: Sunday, March 8, 2026, 9 AM - 5 PM

Required Tools

With Intro to Woodworking I, the student will learn the basic aspects, safety measures and uses of power tools and furniture assembly procedures. You will complete a small wall hanging cabinet. You will gain hands-on experience with basic joinery' how to "4 square" a board as well as hardware installation by the end of the last session.

503_Intro_Spindles.png

$120.00

Beginner

Introduction to the Wood Lathe

with David Bosch

Saturday, March 7, 2026, 9 AM - 5 PM

Required Tools

Have you ever wanted to try turning on a wood lathe? Join us in this introductory class and learn about the lathe and associated tools. Not only will you learn proper processes for spindle turning on the lathe safely and effectively, but you’ll also go home with an attractive candlestick holder. Use the basic skills from this class to move on to other turning classes like pen and bowl turning. All materials are included.

503_Sharpening.jpg

$85.00

Beginner

Sharpening Chisels and Plane Irons

with Robert Stebbins

Tuesday, March 10, 2026, 6 PM - 9 PM

Required Tools

Sharpening is a critical aspect of woodworking. In this class, students will be presented with an overview, a detailed process and a demonstration on how to sharpen plane irons and chisels. Sharpening supplies, tools, and helpful jigs will be discussed as well as several alternate sharpening approaches/methods. Students will practice sharpening their personal plane irons and chisels with help from the instructor.

503_Table_Saw.jpg

$165.00

Intermediate

Table Saw Basics & Techniques

with Terry Nielsen

Friday, March 13, 2026, 9 AM - 5 PM

Required Tools

Terry will teach you how to use a table saw safely and accurately. Each student will have the opportunity to practice many table saw operations including cross cutting, ripping and taper cuts. The student will also make a basic crosscut sled. Terry will go over how to install the sliders so their sled will make accurate crosscuts. He will discuss the advantages/disadvantages of the various types of sliders available so the student can decide which type suits their needs and make a purchase accordingly.

503_WW1-ed.jpg

$380.00

Beginner

Introduction to Woodworking I

with Ed Proctor

Part 1: Saturday, March 14, 2026, 9 AM - 5 PM

Part 2: Sunday, March 15, 2026, 9 AM - 5 PM

Required Tools

With Intro to Woodworking I, the student will learn the basic aspects, safety measures and uses of power tools and furniture assembly procedures. You will complete a small wall hanging cabinet. You will gain hands-on experience with basic joinery' how to "4 square" a board as well as hardware installation by the end of the last session.

503_Bowls.png

$150.00

Beginner

Turning Wooden Bowls

with David Bosch

Saturday, March 14, 2026, 9 AM - 5 PM

Required Tools

In this class you will learn the processes for safely turning a wooden bowl on the lathe. You will complete an attractive bowl that’s about six inches in diameter and two inches deep. It is HIGHLY recommended that you take the Introduction to the Wood Lathe class prior to enrolling in this class as we will be building on the skills learned in the intro class. All materials are included.

503_Santa.jpg

$125.00

All Levels

Wood Carving

with Steve Wilensky

Saturday, March 14, 2026, 9 AM - 5 PM

Required Tools

In Out of My Mind Carving with Steve Wilensky, participants will learn from a master carver with a unique talent for revealing whimsical characters hidden within any piece of wood. Steve’s approach is all about creativity and intuition—guiding each student to carve out the figure that “wants to come out” of the wood. The day begins with an overview of essential skills, including how to handle, manipulate, and keep carving tools sharp while prioritizing safety. With Steve’s expert guidance, students will enjoy the peaceful rhythm of carving, allowing their imaginations to shape delightful, one-of-a-kind characters. This relaxing class is perfect for anyone eager to explore the art of whimsical woodcarving in an inspiring, hands-on environment.

503_OW1.png

$60.00

Beginner

Ocean Wave Board

with Tricia Haberman

Thursday, March 19, 2026, 6 PM - 9 PM

Required Tools

Create a stunning beach-themed resin board using epoxy, pigments, and layered pouring techniques to mimic rolling ocean waves and natural sandy textures. In this hands-on class, your instructor will walk you through prepping the board surface, mixing and tinting epoxy, pouring and sculpting realistic wave effects, and adding shimmering details for depth and motion. You’ll learn proper epoxy safety, color blending, heat-gun wave shaping, and finishing methods to achieve a smooth, high-gloss finish. Leave with a beautiful coastal-inspired board and the skills to continue making resin art on your own.

503_Finish.jpg

$160.00

Beginner

Finishing Workshop

with Milton Miller

Friday, March 20, 2026, 9 AM - 5 PM

Required Tools

Love to build, but hate to finish projects? With this Introduction course, the focus will be to give the student the experience of using different Penetrating Finishes & Topcoats. The teacher will guide the student in various applications penetrating finishes in the morning. Then in the afternoon the teacher will go over the application of various topcoats. The student will use various application methods that include brushes, rags & paper towels.
A method/sequence will be given so the student will be able to achieve predictable results.
The student is strongly encouraged to wear "old" clothes that they are not afraid of getting messy. Gloves will be provided for the student to use.

503_Chair.jpg

$400.00

Intermediate

Build An Adirondack Chair

with Terry Nielsen

Part 1: Saturday, March 21, 2026, 9 AM - 5 PM

Part 2: Sunday, March 22, 2026, 9 AM - 5 PM

Required Tools

Few things are as uniquely American as an Adirondack chair. Build this timeless classic in our 2-day Adirondack chair class. You will learn how to use templates for consistent and repeatable component piece completion. You will then assemble those components into your own backyard masterpiece. Once you have completed this class you will be able to use these techniques to build additional Adirondack chairs for yourself, friends and relatives. Tools used during this class will include the Table Saw, Band Saw, Miter Saw, Spindle and Disk Sander, Router and Drill Driver.

503_End_Grain_CB.jpg

$190.00

All Levels

End Grain Cutting Board

with Milton Miller

Part 1: Tuesday, March 24, 2026, 6 PM - 9 PM

Part 2: Wednesday, March 25, 2026, 6 PM - 9 PM

Required Tools

The instructor will guide students through the entire process of creating an eye-catching end grain cutting board, from selecting the right hardwood to applying the perfect finish. This stunning kitchen accessory may look challenging, but it's amazingly easy to make thanks to a simple trick for creating the lively geometric pattern. Over the course of these two-day sessions, participants will learn to use various power tools and master gluing and clamping techniques, ensuring they complete their own unique and beautifully finished pieces.

503_TurningGifts.jpg

$120.00

Beginner/Intermediate

Turning Gifts

with David Bosch

Wednesday, March 25, 2026, 6 PM - 9 PM

Required Tools

Learn the processes of turning small gifts on the wood lathe. Choose from various handles to turn like: Pizza Cutters (2 sizes), Cheese slicers, Ice Cream Scoops, (2 designs) and a Cake/Pie/Pizza Server (also 2 sizes). All stainless-steel and high quality. They make great gifts and can be turned in a small amount of time. This is a great project for beginning and intermediate woodturners. All materials are included for a single project.

503_Drawers.jpg

$165.00

Beginner/Intermediate

Drawer Construction

with Ed Proctor

Friday, March 27, 2026, 9 AM - 5 PM

Required Tools

Elevate your woodworking prowess with our comprehensive Drawer Building Class! Whether you're a seasoned craftsman or just venturing into DIY projects, this class is tailored for you. Learn the intricacies of precise measurement, material selection, cutting-edge techniques, and seamless assembly. In class we'll explore different methods of construction, depending of style, use and tools that the students have available at home. A. Join us on this enriching journey and unlock the skills to create stunning drawers that stand out for their craftsmanship and durability. Enroll now and bring your woodworking visions to life!

503_Feather4.jpg

$150.00

Beginner

Intro to Power Carving - The Feather

with Christine Smith

Saturday, March 28, 2026, 9 AM - 5 PM

Required Tools

In this power-carving class, participants begin with a precut wood blank shaped for a Great Horned Owl tail feather, learning to use a power-carver to create the feather's natural 3-dimensional curve and taper. Once the basic shape is formed, students add intricate details by carving delicate barbs along each edge and using wood-burning tools to enhance fine textures, including the rachis and unique markings that give the feather its characteristic look. With step-by-step guidance, attendees then apply transparent color washes to build up the feather's muted browns, creams, and grays, using blending and layering techniques to create depth and realism. By the end, each participant completes a lifelike, three-dimensional feather with authentic textures and colors, capturing the beauty of the Great Horned Owl’s plumage.

503_Kumiko_Lantern.jpg

$380.00

Intermediate

Kumiko Lantern

with Deana Spencer

Part 1: Saturday, March 28, 2026, 9 AM - 5 PM

Part 2: Sunday, March 29, 2026, 9 AM - 5 PM

Required Tools

Kumiko is a quiet and thoughtful technique that requires patience and precision. The ancient Japanese woodworking technique consists of making patterns from small pieces of interlocking wood. In this course, your instructor would walk you through the steps needed to create delicate pieces of art with wood. Discover how to seamlessly blend art and craftsmanship by mastering the use of geometry, patterns, and clean lines. Take your woodworking skill to the next level. By the end of the course every student will have created a beautiful lantern with a Kumiko pattern on the sizes.