Bandsaw Blade 93-1/2" x 3/4" x 3 TPI Thin Positive Claw
Timber Wolf makes the world's only thin-kerf, low tension, silicon steel bandsaw blades that will outlast your old carbon steel blades by a mile! Your bandsaw will cut better and faster, with less...
You May Also Like
- High silicon, low carbide steel
- Ideal for resawing thick stock
- Runs cooler and lasts longer
- Runs under low tension which requires less horsepower
- Thin kerf
Get a good one and they cut great.
These blade are worth the money. When these blades are sharp, I don't think you can ask for a better blade. In over 15 of buying them I've only received two that were not acceptable. But they made good on replacing them.
Great Bandsaw Blade
I bought this primarily for resaw work. It went through a 1 1/2" x 3 1/2" piece of walnut easily. I cut 1/8" x 3 1 /2" thick slices without any difficulty. The only downside of this blade is in the uncoiling. It will bite flesh as it snaps into shape.
Very good product and would recommend.
Very sharp and fast cutting saw.
I have an older rockwell 1/2 hp 14" bandsaw that hasn't been used in about five years. I replaced the tension spring and installed this blade to cut six inch red oak. It never bogged down and cut quickly. I'm impressed!
Timberwolf band saw blade 3/4" resaw
Performed as I intended
I needed to resaw some aromatic cedar for the lining in some blanket chests that I was building for Christmas gifts. The blade performed very well.