Bandsaw Blade - 105" x 1/4" x 4 TPI - Positive Claw
Timber Wolf® makes the world's only thin-kerf, low tension, silicon steel bandsaw blades that will outlast your old carbon steel blades by a mile! Your bandsaw will cut better and faster, with less wear on bearings, shafts and tires. Tooth angles and gullet symmetries, combined with a...
Timber Wolf® makes the world's only thin-kerf, low tension, silicon steel bandsaw blades that will outlast your old carbon steel blades by a mile! Your bandsaw will cut better and faster, with less wear on bearings, shafts and tires. Tooth angles and gullet symmetries, combined with a unique set pattern, create a blade that is everything a wood-cutting blade should be. The round design of the gullet eliminates any work hardening zones. Couple that with the special 6.5° rake angle, 5-tooth set pattern and .025" thick thin-kerf blade and you have one excellent bandsaw blade!
- Ideal for roughing (dry wood)
- High silicon, low carbide steel
- Runs cooler and lasts longer
- Runs under low tension which requires less horsepower
- Thin kerf
- Blade Length: 105"
- Blade Width: 1/4"
- Blade Thickness: 0.025" thin-kerf
- Teeth Per Inch: 4 TPI
- Tooth Design: Positive Claw
- Kerf: .042"
- Tooth Hook Angle: 6.5°
- Tooth Set Pattern: 5 Raker Set
- Radius of Cut: 5/8"
- Depth of Cut Range (Hardwood): 2-1/2” – 6”
- Depth of Cut Range (Softwood): 1-1/2” – 4”
- (1) Timber Wolf Bandsaw Blade - 105" x 1/4" x 4 TPI - Positive Claw
Articles & Blogs
Timberwolf makes outstanding blades. They are worth every penny. Before I purchased this blade I was looking into upgrading my 3/4hp motor to a 1.5hp due to constant bogging down - even in thinner material. With this blade, and proper feed rate, the 3/4 horse will resaw through 11" thick red oak!
Moving up in price
I have been seriously woodworking for only a little over 2 years and have had many blades break on me for no apparent reason? So I bought this slightly more expensive blade. Have used it long enough to think it should have broken by now but it hasn't. I use 1/4" so I guess they could be a little fragile? (The 1/2" blade I use for resawing has held up just fine.)
Cuts curves well, even in 2-inch mahogany. Does not burn wood when used properly. Leaves a smooth edge.
great products from timber wolf
Great blade to use-lasts a long time, and gives quality cuts!
Timber Wolf Bandsaw Blade 1/4" x 105", 4
Good quality blade. Cuts fine with hard woods and large widths.
Timber WolfItem 144713
Timber WolfItem 144714
Timber WolfItem 140190
Timber WolfItem 140184
Timber WolfItem 840618
Timber WolfItem 140177
Timber WolfItem 140811
Timber WolfItem 141078