Sauers - Teak 2' x 8' 10mil Paperbacked Wood Veneer
Whether you're a hobbyist or a furniture maker, real wood veneers are ideal for any project including repairing furniture and manufacture, facing kitchen cabinets or finishing shelves and...
Item 131532Model 878084001080
Item 131533Model 878084001103
Item 131530Model 878084001028
Item 131531Model 878084001073
Item 131534Model 878084001134
Item 153272Model 878084006160
Item 404182Model 878084001363
Item 404192Model 878084001370
Item 153270Model 878084006139
Item 153275Model 878084006207
- Real wood veneer
- 24" x 96"
- 1/42" thick
- 10 mil paper backing
Due to the nature of wood movement, shrinkage and expansion are possible. Please measure each piece carefully before starting any project.
Wood is a product of nature, and as such, no two pieces are alike to start with, while the same wood growing in different locales can vary greatly even though it is the exact same species.
Thin Stock. The thin stock is cut to size from quality, kiln-dried stock. Dimensions are +/- 1/8" of size listed.
Carving and Turning Blocks. Blocks are sawn to +/- ¼" of size listed.
Plywood. Sizes are nominal. Dimensions are +/- 1/8" of size listed.
Articles & Blogs
During last year’s WoodExpo 2011 at the New England Home Show, we featured a blog on Kevin Mack Fine Furniture. Kevin is located in Malden, Massachusetts and can also be found online at
www.kevinmackfinefurniture.net. The Mack attack is back at the 2012 show with 5 new fantastic entries showing off his creativity and woodworking expertise. The main goal for all 5 pieces was to create 3 color tones in each piece.
Unbox veneer before buying
When buying veneers be sure to open the box and inspect the entire veneer sheet at the store. I found the first 2 feet to be sun faded as this was on the outside of the roll and the last 2 feet had a large knot pattern which made it unusable. I made the mistake of not checking this and was only able to use 4ft of the 8ft that I bought. Rather disappointing at the price paid.
Better than I hoped for
I needed to put a teak face on the back side of some panels made of teak veneered plywood and this worked out perfectly. It is a little pricey, but worth it to me for the application.