25" Planer, Model WP2510
Shipping Fee of $99.00
Solid steel helical insert head with four-sided carbide insert tooling, eliminates need for adjustment after changing knives, reduces sound levelsDigital readout and simple PC controller make quick and easy table height set upsSegmented serrated infeed roll with segmented chip breakers...
- Solid steel helical insert head with four-sided carbide insert tooling, eliminates need for adjustment after changing knives, reduces sound levels
- Digital readout and simple PC controller make quick and easy table height set ups
- Segmented serrated infeed roll with segmented chip breakers has 1/4" independent yield, for planing multiple height stock
- Massive gear box maintains positive feed by using a large chain drive with automatic chain tensioners, to power infeed and outfeed rollers
- 3" diameter infeed and outfeed rollers are supported by four large, sealed, needle bearings for long life
- Quick-Set micro-adjustable lever easily raises and lowers table rollers from 0" to 0.050" at a touch
- Frame machined from heavy cast iron and extra wide side panels with gibs, offers rigid bed support and accurate alignment
- Solid pressure bar has wide foot for long wear and can be adjusted on both ends for precise feeding
- 3 speed feed selector allows you to quickly change feed rates
- Large 32-3/16 x 26 precision-ground table contains two adjustable table rollers for smooth feeding of uneven stock
- Dust hood features built-in 5" dust chute for efficient dust collection
- Helical head with four sided inserts
- Dust hood with 5" diameter dust port
- Segmented infeed rollers
- Segmented chip breakers
- Tool kit with pneumatic screwdriver for removing the cutterhead insert blades
- Bed Rollers Adjustable from Front : 0" to 0.05"
- Column Diameter (in) : 2-1/2
- Cuts Per Minute : 30000
- Cutterhead Diameter (in) : 3-3/8
- Cutterhead Speed (RPM) : 5000
- Dust Collection Minimum CFM Required : 600
- Dust Port Diameter (OD/in) : 5
- Feed Rate (FPM) : 30-25-20
- Height (in): 59
- Length (in): 52
- Maximum Depth of Cut (in) : 1/4
- Maximum Full Width Depth of Cut (in) : 1/8
- Maximum Height of Rollers Parallel to Tabletop (in) : 0.05"
- Maximum Planing Thickness (in) : 9
- Maximum Planing Width (in) : 25
- Minimum Planing Length (in) : 10
- Model Number : WP2510
- Motor HP : 15HP
- Motor Phase : 3Ph
- Motor Voltage : 230/460V
- Net Weight (lb): 1,725
- Number of Knives : 168 Four-sided inserts
- Outfeed Roller Diameter (in) : 3
- Overall Dimensions : 52 x 36 x 59
- Part Number : 1791303
- Prewired : Prewired 230V
- Readout Scale : in/mm
- Rollers (in) : (1) infeed, (2) outfeed
- Rotation (Forward/Reverse) : Fwd only
- Segmented Infeed Roller Diameter (in) : 3
- Table Height Adjust Manual : 1 handwheel revolution = 1/32"
- Table Size (in) : 32-3/16 x 26
- Table Support : 2 column
- Tool Supplied : tool kit
- Width (in): 36
- Shipping weight 1,850 lb.
Shipping / Billing InformationAll shipments must be inspected and any damage reported within 3 days of receipt.
Address corrections and cancellations may not be possible once order is submitted. Requested changes may incur additional charges.
This product ships direct from the manufacturer:
- Your order will ship in 7-10 approximately business days.
- This product is considered special order. Your account will be charged when you place your order.
- Express or overnight shipping is not available for this product.
- Ships by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.
All returns must be pre-approved. Any non-warranty returns must be unused and in original packaging. A 25% restock fee will apply. Customer pays return freight. Please call our Customer Service Dept. at 1-800-535-4482 with any return questions.
Because this item is purchased and shipped directly from the manufacturer, their warranty supersedes any offered by Woodcraft. Click here for Powermatic Warranty
Instructions / MSDS