Maple, White 7/8" x 50' Edge Banding
Edge banding is all-natural wood veneer that has been pre-sanded, backed, and pre-glued. It is precoated with a heat-activated glue for a permanent bond. Just iron it on!Natural wood7/8" x...
You May Also Like
Knape and Vogt
- Natural wood
- 7/8" x 50'
- Permanent bond
Due to the nature of wood movement, shrinkage and expansion are possible. Please measure each piece carefully before starting any project.
Wood is a product of nature, and as such, no two pieces are alike to start with, while the same wood growing in different locales can vary greatly even though it is the exact same species.
Thin Stock. The thin stock is cut to size from quality, kiln-dried stock. Dimensions are +/- 1/8" of size listed.
Carving and Turning Blocks. Blocks are sawn to +/- ¼" of size listed.
Plywood. Sizes are nominal. Dimensions are +/- 1/8" of size listed.
This stuff is great
I've been woodworking for a long time but this was my first venture into edge banding. Faced the edges of some maple plywood shelving with it. Easy to apply (I used a cheap iron), easy to trim (I used a razor knife), and the end result is flawless. Looks like a solid board. I think I'm going to be using this alot more in the future. I can't speak to the durability of it, yet.
Better than expected!
Used these to install on my entertainment center made out of Maple ply and the color was a perfect match to it, so I can't complain! The glue is also very strong. Thank goodness for Woodcraft as well, because I couldn't find these anywhere until I ran into this site.
I'm building my own entertainment center and have been looking for a good Maple veneer edging since I have maple ply to make it with and this did the job perfectly. The grain and color matches the maple ply perfectly and has stained/dyed very well with the rest of the unit. Couldn't be happier.