Instant Bond CA Adhesive - Thin - 2 oz
Titebond® Instant Bond is a two-part bonding system that takes between 5 - 15 seconds to set and 30 - 60 seconds for initial cure. It provides a strong, permanent bond and is ideal for hard to reach joints or surface areas that are difficult to clamp. Designed primarily for wood and...
Titebond® Instant Bond is a two-part bonding system that takes between 5 - 15 seconds to set and 30 - 60 seconds for initial cure. It provides a strong, permanent bond and is ideal for hard to reach joints or surface areas that are difficult to clamp. Designed primarily for wood and wood products, this adhesive is also very effective on a wide variety of materials and substrates. The thin viscosity product offers an assembly time of 5 seconds and an initial cure speed of 3 seconds. In addition to typical bonding applications, it is ideal for wicking hair-line cracks and can be used without an activator.
- Ideal for wicking hair-line cracks
- Fast set - eliminates clamping or reduces clamp time
- Bonds stronger than wood
- Excellent heat and solvent-resistance
- Versatile - Bonds wood, MDF, acrylic, granite, natural rubber, PVC and more
- Two-year shelf life (your glue will last longer)
- Triple distillation to produce a superior quality product with tensile shear strength of over 4,000 PSI
- Comes with a specifically designed pin on the top of the bottle to prevent the glue from drying and clogging when not in use
- Type: Cyanoacrylate (CA) glue
- Viscosity: Thin
- Assembly Time: 5 seconds
- Cure Time: 3 seconds
- (1) Titebond - Instant Bond CA Wood Adhesive - Thin - 2 oz Bottle
Instructions / MSDS
Articles & Blogs
This is Part 3 in the making of the Recipe Box
Making Christmas decorations is a great way to get into the holiday spirit, but it’s also a very effective way to make use out of small or awkward sized scrap wood that’s cluttering up the shop or just being thrown away. Even old, worn out and broken decorations that have been cast aside can be given new life by adding them as accents to these projects.
After reading some heated Internet threads about the WoodRiver planes, I’ll admit that I had some misgivings about putting myself in the crossfire. Then, I thought about the guy looking to buy his first block or bench plane on a limited budget. Price is important, especially today. (I had been woodworking for 15 years before I could afford my first Bed Rock.) That said, no tool is a bargain if it doesn’t work properly. So, out of pure curiosity, I accepted the assignment to examine and test the first editions of the WoodRiver block and bench planes.
Well it works
This was the firstr CA glue i bought, and found it a bit to thin for me while it lives up to it 3 to 5 second drying time that is what made it harder for me a beginner to work with. Also Be very careful this stuff is not to be gotten on your skin OUCH!!! Burns like crazy. A rule of thumb little goes a very long way
Excellent for stopping wood checking
I used it to stop the checking in wood when I'm turning it on a lathe.
I use this product because in making small antique toys I need a product that does not run off the wood and sets quickly. This fits all of those qualities.
I have tried this on several projects and it seems that this type of CA glue does not bond well if at all. I am very dissatisfied with this product from Tiebond. I will not burchase this brand of CA glue again. I will go back to the other brand, it's a bit more expensive but it works.