These HIGHPOINT® Die-Cast Zinc Alloy Hex Drive Inserts are for ready-to-assemble furniture, drawer pulls and wherever you need an easy-to-install threaded insert. Large teeth give increased holding strength in particleboard and end-grain applications.
Pilot-hole measurements may vary due to the nature and grain of wood. We recommend a trial installation on a piece of scrap.
Features:

• Thread: 1/4" x 20 TPI

• Length: 1/2"
• Pilot hole: Softwood: 11/32"
• Pilot hole: Hardwood: 23/64"
• Hex drive: M6