WoodRiver - Bottle Opener Turning Kit - Chrome
Save $2 Now Through September 30, 2021
Items You May Need
Item 161754Model TW
Item 150968Model BS-01S/304
Item 140490Model BAG OF TEN
Item 150549Model 0907/LO-HP
Item 144631Model 144631
Item 111191Model 111191
Use this fun and simple WoodRiver® Bottle Opener Turning Kit to create a bottle opener that will serve as a great accessory to any kitchen or bar.
- Build it yourself
- Sturdy 3/8 threaded post
- Turn between centers
- Finish: chrome plated
- Opener Dimensions: approximately 1-7/8" wide x 3-1/4" tall
- Threaded Post Dimensions: 3/8" diameter x 1-5/16" long
- (1) Bottle Opener Turning Kit - Chrome
- (1) Set of Instructions
- Minimum Blank Dimensions: 1-1/2" x 1-1/2" x 6"
- Simply mark center, drill a 3/8"-diameter hole by 1-5/16" deep, mount the blank between centers, and let your imagination do the rest. We have found that a 4-1/2" – 5" handle works the best. Once the handle is completed, epoxy the opener into the previously drilled hole and then sit back and relax with a cold beverage.
Instructions / MSDS
Articles & Blogs
Nothing says “I love you” like a gift that is made from the heart…and the hands. With so many kits, plans and How-Tos available at Woodcraft, you are sure to find something fantastic to make for your loved ones no matter your skill level. Here are a few ideas to get you started!
The most common question asked when thinking about Mother's Day gifts is typically, "What am I going to get mom for Mother's Day." Or, if you're the kind of mom who loves dropping those subtle gift hints, here's some great DIY gift ideas from Woodcraft that will be sure to help in making something for Mom!
I am very happy with the bottle opener, I do wish there were other options asides from just stainless steel. Following the advice of another reviewer I used an 11/32 drill bit, which is correct as a 3/8 will create a hole way to large.
My friends love them
My friends love them, sell some, give some...
Bottle Opener Heads
What happened to the Pewter bottle opener heads ? I do not care for chrome as the pewter looks more antique. Throw away the heavy threaded insert and just use the fine thread shank itself using good epoxy. Otherwise the head of the opener has to be much bigger and looks like a club.
Great bottle opener
This is a great opener, but beware, The directions written by woodcraft use a 3/8 bore. I found this to be incorrect, as it will create a hole too large to allow threading (the threads are machined into the shank of the bottle opener from the manufacturer). I recommend using an 11/32 bore so that the opener can be threaded down into the hole with epoxy.
Will buy this again
Look great with any type of wood used for the handle.
Great product. Plan on buying many more.
Looks nice, made well & works great.
This was a quick and easy project with great results.