Bottle Opener Kit Chrome
With this fun and simple Chrome Plated Kit you can create a bottle opener that will make a great accessory to any kitchen or bar. Simply mark center, drill a 3/8"-diameter hole by 1-5/16" deep,...
You May Also Like
We have found that a 4-1/2" – 5" handle works the best. Once the handle is completed, epoxy the opener into the previously drilled hole and then sit back and relax with a cold beverage. Opener measures approximately 1-7/8" wide by 3-1/4" tall and incorporates a 3/8 diameter threaded post by 1-5/16" long.
Build it yourself
Durable chrome plating
Sturdy 3/8 threaded post
Turn between centers
Instructions / MSDS
Articles & Blogs
My friends love them
My friends love them, sell some, give some...
Bottle Opener Heads
What happened to the Pewter bottle opener heads ? I do not care for chrome as the pewter looks more antique. Throw away the heavy threaded insert and just use the fine thread shank itself using good epoxy. Otherwise the head of the opener has to be much bigger and looks like a club.
Great bottle opener
This is a great opener, but beware, The directions written by woodcraft use a 3/8 bore. I found this to be incorrect, as it will create a hole too large to allow threading (the threads are machined into the shank of the bottle opener from the manufacturer). I recommend using an 11/32 bore so that the opener can be threaded down into the hole with epoxy.
Will buy this again
Look great with any type of wood used for the handle.
Great product. Plan on buying many more.
Looks nice, made well & works great.
This was a quick and easy project with great results.