Woodcraft of Tucson

Woodworking Series for Beginners - End Table

Part 1: Thursday, June 19, 10 AM - 4 PM

Part 2: Friday, June 20, 10 AM - 4 PM

Part 3: Thursday, June 26, 10 AM - 4 PM

Part 4: Friday, June 27, 10 AM - 4 PM

Get started in woodworking with this series of classes by building a fine end table. Starting in part 1, you will learn to use hand and power tools, shop safety, selecting wood and preparation. In part 2, you will use cut lists, drawings, measuring, cutting parts to size, panelizing and gluing. In part 3 you will complete final cutting of parts, sanding and prepare for assembly. A discussion of finishing will follow. Eye protection, dust mask, hearing protection required.

Introduction To The Table Saw

Saturday, June 21, 9:30 AM - 11:30 AM

If you have never used or have little experience with power tools and want to learn, then this class is for you. The Introduction to the Table Saw class will cover safety, tool components, setup and checks, basic cuts including crosscuts, rip cuts, miter cuts, bevel cuts and special setups for specific cuts. Some hands-on time will be available for you to practice. Build your confidence using this work horse of the wood shop. We will be using the SawStop table saw as our tool of choice.

Band Saw Basics

Saturday, June 21, 2 PM - 4 PM

A band saw is one of the most versatile tools in a woodworkers shop, but only if it is tuned up correctly. This class will teach you how to do that tune up properly, and how to maintain your band saw for years of reliable service. We will discuss which blade is best for any given situation, and how to use your band saw safely and efficiently when completing various cuts like resawing, cutting curves and compound curves, and when using various jigs.