304_Outdoor_Finishes_Demo.jpg

Outdoor Finishes

Saturday, July 20, 1 PM - 2 PM

Ensure your outdoor projects can stand up to the weather by choosing the right outdoor finish. Let us show you the options and how to pick the right one for your project.

304_HandPlaneTuneUpDemo.jpg

Hand Plane Tune Up

Saturday, August 10, 1 PM - 2 PM

Making clean cuts with a hand plane is easy – if you have your plane set up properly. Join us as we go over how to dial it in for the right cut.

304_FoodSafeFinishingDemo.jpg

Food/Child Safe Finish Options

Saturday, August 17, 1 PM - 2 PM

Safety first! Any projects that come in contact with the mouth need special attention with finish. Learn about all the food and child safe finish options available and when you need to use them.

304_WorkbenchesDemo.jpg

Workbenches and workholding

Saturday, September 14, 1 PM - 2 PM

Where you work makes a big impact on how you work. Let us show you the importance of using a workbench and vises to keep your work steady.

304_ChuckDemo.jpg

How to Choose a Chuck for your Lathe

Saturday, September 21, 1 PM - 2 PM

Holding your turning blank in place properly means a safe and fun turning experience. Join us as we walk through the different chuck options and when you need to use them.

304_Sharpening_Demo.jpg

Sharpening your Tools

Saturday, October 12, 1 PM - 2 PM

Sharp tools are safe tools. Stop in and learn how to properly keep the edge of your tools sharp.

304_knife_making_demo.jpg

Intro to Knife Making

Saturday, October 19, 1 PM - 2 PM

Build your own custom knife that you (or someone you know) will treasure for years to come. Join us as we walk you through the process.

304_JoineryJigDemo.jpg

Joinery Jigs – How to Use/why to buy

Saturday, November 9, 1 PM - 2 PM

A couple boards and some nails might work, but they may not be the best solution to keeping your project in one piece. Join us as we review different types of joinery jigs to help you build a strong finished piece.

304_RouterJigsDemo.jpg

Router Jigs and Templates

Saturday, November 16, 1 PM - 2 PM

With a router and a template, you can create custom jigs and fixtures for your shop or complex designs for projects. Learn how to get started today.