Woodcraft of Roanoke

Father's Day 15% Off Sale!

Part 1: Friday, June 6, 9 AM - 7 PM

Part 2: Saturday, June 7, 9 AM - 6 PM

Part 3: Sunday, June 8, 12 PM - 5 PM

Just in time for Father's Day, it's your Woodcraft of Roanoke's Father's Day 15% OFF Sale! June 6th - 8th save 15% on just about everything in the store! (Standard exclusions like Power Tools apply, see store for full details). Get something for dad that he'll love, and save money? Win / win! Also, don't forget about our Woodcraft gift cards; a sharp gift for any occasion!

Get Started with Resin

Saturday, June 14, 1 PM - 2 PM

Ready to make your own turning blank or start that river table you’ve been dreaming of? Join us to learn how to get started with resin casting. We’ll go over the basics and show you how to pour a pen blank to get started.

Get Started with Turning

Saturday, June 21, 1 PM - 2 PM

Have you always wanted to turn a bowl or a pen? Let us show you what you need and how to get started in woodturning.

Bandsaw Guru Alex Snodgrass in Store July 11th

Friday, July 11, 9 AM - 4 PM

Come see the incomparable Alex Snodgrass Friday, July 11th 9am to 4pm at your Woodcraft of Roanoke. Bring all your bandsaw questions. We will have the bandsaw guru here with the answers.

Hand Cut Dovetails

Saturday, July 12, 1 PM - 2 PM

Stop in and learn how to create a timeless hand cut dovetail. We’ll provide tips and tricks to get a snug joint and talk through the tools you’ll need to get started.

Small Turning 101

Saturday, July 19, 1 PM - 2 PM

Sometimes bigger isn’t better – let us show you how to get your small turning projects to turn out just as you want them.

Incredible Finishes 2025

Part 1: Friday, July 25, 9 AM - 7 PM

Part 2: Saturday, July 26, 9 AM - 6 PM

Part 3: Sunday, July 27, 12 PM - 5 PM

Join us the weekend of July 25th - 27th for our Incredible Finishes event! Save 15% on all finishes and finishing accessories that whole weekend. We'll also have four finishing demonstrations on Saturday the 26th: 10:00am Hard Wax Oils; 10:45am Water Based Film Building Finishes; 11:30am Oil Based Film Building Finishes; 12:15pm CA Finishes

Router Jigs and Templates

Saturday, August 9, 1 PM - 2 PM

Using your router to create projects gets a little easier with a jig or template. We’ll walk you through the basics how to rout with a template.

Festool

Saturday, August 16, 1 PM - 2 PM

New Product Demo

Treasure Chest Event 2025!

Part 1: Friday, August 22, 9 AM - 7 PM

Part 2: Saturday, August 23, 9 AM - 6 PM

Part 3: Sunday, August 24, 12 PM - 5 PM

Stop by the store beginning in August to get your treasure chest keys. Then, come back the weekend of August 22nd - 24th during our 15% OFF weekend sale. We'll see if your key is one of the lucky ones that can open the treasure chest. It it does, you win one of our special prizes! Prizes include: Grand Prize 4.7 Gallon Oil-free Steel Ultra Quiet Air Compressor, a Wixey Digital Height Gauge, 4" Double Square, two $25 Woodcraft Gift Cards, two Advanced Gripper Systems (SKU 820434), two 5.5 RO Buff Pads, and a Garlick Veneer Saw. Don't miss this fun event. Save even if your keys aren't winners! *15% OFF sale is 15% OFF most products in the store. Normal Exclusions like Power Tools apply. See store for complete details.

Handsaws – choose the right one

Saturday, September 13, 1 PM - 2 PM

Different sizes, shapes and cut directions – which is the right one for you? We’ll point out the reasons why you use one versus another and help you narrow down to the right choice for your style of woodworking.

Hand Plane Tune Up

Saturday, September 20, 1 PM - 2 PM

Making clean cuts with a hand plane is easy – if you have your plane set up properly. Join us as we go over how to dial it in for the right cut.

Router Bit and Saw Blade Maintenance

Saturday, October 11, 1 PM - 2 PM

Keeping your bits and blades clean makes for cleaner cuts. Join us as we step through how to remove the buildup on your bits and blades.

Intro to Knife Making

Saturday, October 18, 1 PM - 2 PM

Build your own custom knife that you (or someone you know) will treasure for years to come. Join us as we walk you through the process.

Ornament Making

Saturday, November 8, 1 PM - 2 PM

Tis the season! Let us show you various ways to create custom Christmas ornaments using our kits.

Cutting boards

Saturday, November 15, 1 PM - 2 PM

Fun to make and functional in the kitchen – learn to create a custom cutting board. We’ll explain how to put it together and finish it with design and safety in mind.