582_fj.jpg

$75.00

All Levels

Wood and Epoxy Coasters

with Josh McDaniel

Part 1: Saturday, November 1, 2025, 12 PM - 2 PM

Part 2: Sunday, November 2, 2025, 12 PM - 3 PM

Day one, students will prep their wood, learn about molds and pour their epoxy. Day two, students will demold their work, cut to size, shape, sand and apply cork backing. Students will leave with a finished product they'll love to show off!

582_sdg.png

$150.00

All Levels

Turning Small Lidded Dish

with Jody Greene

Tuesday, November 4, 2025, 10 AM - 2 PM

Great class for beginners! Students will use a lathe to turn a small bowl and will be able to choose between 4 different lid designs. These small, lidded dishes can be used for potpourri, loose change, jewelry and more! Would make a great gift or addition to upcoming holiday markets!

582_rt.jpg

$450.00

All Levels

Stair Step 3D Cutting Board

with Jody Greene

Saturday, November 8, 2025, 9 AM - 5 PM

Making a 3D cutting board doesn’t have to be intimidating! Join our resident cutting board craftsman, Jody Greene, as he walks you through how to make the perfect gift for the holidays! Using only three different woods - maple, cherry, and walnut – Jody will guide students through the process by teaching techniques required to build a cutting board: how to make dead-on straight cuts and accurate angled cuts on the bandsaw, and how to plane, sand, glue, and clamp the cutting board. Topics to be covered include: bandsaw mechanics, correct blade tension, accurate angle cuts, gluing techniques, end-grain planing, end-grain pattern alignment, food-safe finishes, and care and maintenance of cutting boards. By the end of the day, each student will have a fantastic 3D cutting board made with their own hands! This class is designed for woodworkers of all skill levels. From the beginner to the advanced woodworker, every student will leave the class with a 3D cutting board and a smile on their face. Register today – limited spots available!

582_jkl.png

$10.00

All Levels

Santa's Special Turn'N'Learn Ornament Class

with Santa

Wednesday, November 12, 2025, 2 PM - 4 PM

Private Event

582_jkl.png

$10.00

All Levels

Santa's Special Turn'N'Learn Ornament Class

with Santa

Saturday, November 15, 2025, 10 AM - 11 AM

No Experience Necessary! Ages 10-110! *Kids under 10 will be able to paint ornaments - free of charge* Bring the family! Use a lathe to turn and take home your very own Christmas ornament this season. Laser engraving available.

582_jkl.png

$10.00

All Levels

Santa's Special Turn'N'Learn Ornament Class

with Santa

Saturday, November 15, 2025, 11 AM - 12 PM

No Experience Necessary! Ages 10-110! *Kids under 10 will be able to paint ornaments - free of charge* Bring the family! Use a lathe to turn and take home your very own Christmas ornament this season. Laser engraving available.

582_jkl.png

$10.00

All Levels

Santa's Special Turn'N'Learn Ornament Class

with Santa

Saturday, November 15, 2025, 12 PM - 1 PM

No Experience Necessary! Ages 10-110! *Kids under 10 will be able to paint ornaments - free of charge* Bring the family! Use a lathe to turn and take home your very own Christmas ornament this season. Laser engraving available.

582_ghj.png

$350.00

Intermediate/Advanced

Turning 103: Wood and Epoxy Hybrid Vase

with Josh McDaniel/Jody Greene

Part 1: Saturday, November 15, 2025, 1 PM - 4 PM

Part 2: Saturday, November 22, 2025, 10 AM - 5 PM

*This is an advanced turning class. Previous experience is required* Unlock the beauty of Australian burls and transform them into stunning, one-of-a-kind pieces of art in this hands-on woodworking class. In this class, you’ll learn the process of casting Australian burls in resin, preserving their intricate grain patterns and unique features. Once your castings are set, you'll move on to the exciting step of turning them into elegant, small vases using a lathe. By the end of the class, you’ll have a finished piece you can be proud of, and the confidence to continue exploring the world of resin casting and wood turning. Join us for a creative and rewarding woodworking experience! This class will be broken up into two sessions. November 15 - Casting the blank with Josh McDaniel November 22 - Turning the blank with Jody Greene

582_jkl.png

$10.00

All Levels

Santa's Special Turn'N'Learn Ornament Class

with Santa

Saturday, November 15, 2025, 1 PM - 2 PM

No Experience Necessary! Ages 10-110! *Kids under 10 will be able to paint ornaments - free of charge* Bring the family! Use a lathe to turn and take home your very own Christmas ornament this season. Laser engraving available.

582_jkl.png

$10.00

All Levels

Santa's Special Turn'N'Learn Ornament Class

with Santa

Saturday, November 15, 2025, 2 PM - 3 PM

No Experience Necessary! Ages 10-110! *Kids under 10 will be able to paint ornaments - free of charge* Bring the family! Use a lathe to turn and take home your very own Christmas ornament this season. Laser engraving available.

582_jkl.png

$10.00

All Levels

Santa's Special Turn'N'Learn Ornament Class

with Santa

Saturday, November 15, 2025, 3 PM - 4 PM

No Experience Necessary! Ages 10-110! *Kids under 10 will be able to paint ornaments - free of charge* Bring the family! Use a lathe to turn and take home your very own Christmas ornament this season. Laser engraving available.

582_jkl.png

$10.00

All Levels

Santa's Special Turn'N'Learn Ornament Class

with Santa

Saturday, November 15, 2025, 4 PM - 5 PM

No Experience Necessary! Ages 10-110! *Kids under 10 will be able to paint ornaments - free of charge* Bring the family! Use a lathe to turn and take home your very own Christmas ornament this season. Laser engraving available.

582_jkl.png

$10.00

All Levels

Santa's Special Turn'N'Learn Ornament Class

with Santa

Saturday, November 15, 2025, 5 PM - 6 PM

No Experience Necessary! Ages 10-110! *Kids under 10 will be able to paint ornaments - free of charge* Bring the family! Use a lathe to turn and take home your very own Christmas ornament this season. Laser engraving available.

582_ry.png

$150.00

Beginner

Basic Bowl Turning

with Jody Greene

Tuesday, November 18, 2025, 10 AM - 4 PM

Whether you're a beginner or someone wanting to brush up on your turning skills, this basic bowl turning class is for you! This class will cover shop safety and the proper use of a lathe by making a basic bowl from start to finish. To minimize drying times so that the student can finish their bowl in a reasonable amount of time, we will be using dried bowl blanks. We will also discuss various finishes to add some personalization to your bowl. Once finished, you will be able to enjoy your bowl for years to come. Note: This class utilizes Easy Wood Tools with carbide cutters. If you prefer classic High Speed Steel (HSS) tools, bring your own or inquire within when attending class.

582_fgj.jpg

$150.00

All Levels

Pizza Date Night - Cutting Board

with Jody Greene

Friday, November 21, 2025, 6 PM - 9 PM

Each class purchase is for 2 spots, a cutting board to make together and pizza/drinks. This date night class is a great way for you and your partner to learn how to make a cutting board. Each pair of students will get to choose a cutting board kit and then learn the tricks for a good glue up, how to use a router to clean up edges, how to get a smooth board using a drum sander/orbital sanders, what food safe finishes to use and will have the option of adding feet. Each pair of students will leave with a cutting board that they can cherish forever!

582_v.jpg

$250.00

All Levels

Epoxy River Serving Board

with Josh McDaniel

Part 1: Saturday, December 6, 2025, 1 PM - 5 PM

Part 2: Saturday, December 13, 2025, 1 PM - 3 PM

Make an eye-popping serving board with an epoxy poured center. Board will be approximately 15.7"x9.8"x1". Using molds, prepping wood, clamping and mixing for the pour are just a few things you will learn in this class. The second class will involve removing the mold, clean-up, sanding and finishing. Materials included in tuition.

582_hj.png

$25.00

Beginner

Christmas Ornament Carving and Painting

with Justin Neal

Sunday, December 7, 2025, 12 PM - 2 PM

The holidays are right around the corner! If you want to try out carving, then this classic ornament class is perfect for you! You will learn some basic carving techniques and leave with a beautiful ornament for your tree! No experience required.

582_fg.jpg

$30.00

All Levels

Epoxy Resin Christmas Ornaments

with Josh McDaniel

Sunday, December 14, 2025, 3 PM - 5 PM

Learn how to mix and pour epoxy in this simple intro to resin class. No tools required! Students will be able to pour multiple ornaments to keep or giveaway! *Ornaments will have to cure overnight and will be ready for pickup next day*

582_fgh.png

$130.00

All Levels

Beginning Pen/Pencil Turning

with Brigham Cook

Saturday, January 10, 2026, 12 PM - 5 PM

This is a great introduction to turning wood on a lathe, with the end product being a penor pencil to keep that you made yourself from start to finish. We cover the basics of safety, the parts of a lathe, lathe tools, and accessories, as well as everything you need to start making pens, magic wands, hairsticks, Christmas ornaments, and other turned creations! During the five-hour class, students in the class will learn how to select and cut wood pen blanks, drill and mount the blanks on the lathe, turn the pen barrels, apply finish, and assemble a pen. And the skills learned in this class will easily transfer to other spinMinimum 2Maximum 4dle turning classes or projects.

582_l.png

$350.00

All Levels

Build a Shaker Table

with Justin Neal

Sunday, January 11, 2026, 9 AM - 5 PM

If you are looking to take your woodworking to the next level, then this is it! In this one day course, our instructor will walk you through building a table in the popular shaker style. Tools and materials are all provided - including use of the table saw, band saw, jointer, and other shop accessories. At the end of the day, you will have a beautiful table to accent any area of your home for years to come.

582_jfj.png

$150.00

Beginner

Keepsake Box

with Josh McDaniel

Saturday, January 17, 2026, 11 AM - 5 PM

Join our woodworking class designed to teach you how to craft your own beautiful keepsake box. Perfect for beginners and enthusiasts alike, this hands-on workshop covers essential skills such as measuring, cutting, sanding, and assembling wood, along with decorative finishing techniques. Under our instructor's guidance, you'll create a personalized storage box ideal for preserving cherished mementos, making it a meaningful and memorable project. All materials and tools are provided; just bring your creativity and enthusiasm!

$150.00

Beginner/Intermediate

Intro to Cabinet Doors

with Justin Neal

Sunday, January 18, 2026, 9 AM - 5 PM

This class will demystify the construction and process of making a Raised Panel Door that will go on your cabinet. You will use the table saw, miter saw, router table, hand router, and random orbital sander. We will discuss design, techniques, and proper tool use, and you will learn the math required to create an appropriate list of cuts. Come with a notepad and a pencil; you’ll need to take plenty of notes. Wood will be provided for the project.

$450.00

Beginner/Intermediate

Intro to Cabinetmaking: Complete Shop Cabinet

with Justin Neal

Part 1: Sunday, January 18, 2026, 9 AM - 5 PM

Part 2: Saturday, January 24, 2026, 9 AM - 5 PM

Part 3: Sunday, January 25, 2026, 9 AM - 5 PM

*This class includes carcass/face frame, cabinet door and cabinet drawer classes.* This three-part intro to shop cabinets class will provide you with the knowledge to outfit your own shop or kitchen! Bring a notepad and pencil, you'll need it! Jan. 18, 2026 - 9am-5pm Intro to Cabinet Doors Jan. 24, 2026 - 9am-5pm Intro to Cabinet Drawers Jan. 25, 2026 - 9am-5pm Intro to Cabinet Carcass and Face Frame

$150.00

Beginner/Intermediate

Intro to Cabinet Drawers

with Justin Neal

Saturday, January 24, 2026, 9 AM - 5 PM

This class will cover many different construction methods of creating a drawer box for your cabinet. We will discuss the layout, drawer guide hardware, building techniques of a drawer, and how to use the table saw, router table, miter saw, and hand router to construct the drawer box. Wood will be provided for the project.

$180.00

Beginner/Intermediate

Intro to Cabinet Carcass and Face Frame

with Justin Neal

Sunday, January 25, 2026, 9 AM - 5 PM

The first step in building cabinets is constructing the "box" or carcass. In this, hands-on, class you will learn the proper techniques to create a strong and durable cabinet carcass. Joinery and assembly techniques for most cabinet applications will be discussed. The Kreg Jig will be demonstrated and used for the face frame assembly. Bring a notepad and a pencil, you’ll need them. Wood will be provided for the project.

582_sd.png

$80.00

All Levels

Casting Resin Pen Blanks

with Brigham Cook

Saturday, February 21, 2026, 10 AM - 2 PM

Learn how to make your own pen blanks using epoxy in this class! Students will learn the basics of using epoxy resin as they're guided through the process of creating 4 of their own blanks. NOTE: Students can take our Acrylic Pen Turning class to turn their blank into a pen OR they can come back after the class to de-mold their blank and take it home to turn.

582_X.jpg

$135.00

Beginner

Acrylic Pen/Pencil Turning

with Brigham Cook

Saturday, March 7, 2026, 12 PM - 5 PM

NOTE: Students who took the Casting Pen Blanks class and use their blanks will receive a $20 gift card. This is a great introduction to turning acrylic or resin on a lathe, with the end product being a pen or pencil to keep that you made yourself from start to finish. Previous turning or woodworking experience is helpful but definitely not required. We cover the basics of safety, the parts of a lathe, lathe tools, and accessories, as well as everything you need to start making acrylic or resin pens, bottle stoppers, Christmas ornaments, and other turned creations! During the five hour class, students in the class will learn how to select and cut pen blanks, drill and mount the blanks on the lathe, turn the pen barrels, wet sand, and assemble a pen. And the skills learned in this class will easily transfer to other spindle turning classes or projects.

582_ghj.png

$130.00

All Levels

Beginning Pen/Pencil Turning

with Brigham Cook

Saturday, April 11, 2026, 12 PM - 5 PM

This is a great introduction to turning wood on a lathe, with the end product being a pen or pencil to keep that you made yourself from start to finish. We cover the basics of safety, the parts of a lathe, lathe tools, and accessories, as well as everything you need to start making pens, magic wands, hairsticks, Christmas ornaments, and other turned creations! During the five-hour class, students in the class will learn how to select and cut wood pen blanks, drill and mount the blanks on the lathe, turn the pen barrels, apply finish, and assemble a pen. And the skills learned in this class will easily transfer to other spinMinimum 2Maximum 4dle turning classes or projects.