Turn a pen from colorful acrylic! This class is an excellent way to get into the art of turning with hands-on lathe experience. Each student will turn and construct a complete acrylic pen to take home. All materials are included.
This is a basic instructional class directed at one of the most useful tools in the entire shop: the table saw. Students will learn basic table saw safety and operation in-depth. Step-by-step, we will walk you through table saw setup, essential personal safety, care and control of the saw, table saw anatomy, blade selection and proper installation, calibration, and how to safely get the most out of this valuable tool. We will be working specifically with the SawStop, and we'll learn the features specific to SawStop technology. However, the processes we cover apply to all table saws, and this class is for students who wish to learn about all table saws in general. Students will have hands-on experience in class as they apply the principles learned. This is not a project class, but rather a comprehensive master class on table saw essentials. These are small classes! Confirm your enrollment as soon as possible to ensure your spot in class. All Materials Are Included In The Cost Of Tuition.
This 2-day class is a hands-on introduction to cabinet construction. Students learn as they build a small-scale Face Frame Style cabinet suitable for the kitchen, other home areas or shop storage. There are many construction methods in cabinet-making, this class will focus on Face Frame construction. In this fundamentals class, we will focus on table saw work for dado joinery of the carcass; and stile and rail construction of a flat panel door with European hinges. There is no pre-requisite.
In the Morning Session – Raleigh will begin with the A, B, C and D’s of Woodturning – Focusing on the Foundation of Woodturning. This will include lathe history, operations, Shop Safety, tool selection, sharpening, woodturning tool and wood selection. Raleigh will teach the students all about the different woodturning tools, the different styles and grinds, as well as how to choose, sharpen and how to use your woodturning tools. We will go over wood grain, density, moisture content, domestics vs. exotics, how to correctly prepare turning blanks, the various methods of mounting your work on the lathe, and much more. In the Afternoon Session – we will apply your morning skills to turn Mini Bowls!! Turning Mini Bowls is a repeatable woodturning project that you can repeat and wood turn in your home workshop. This class is a must to accelerate your skills for turning bowls, boxes, platters, and various woodturning projects. This is a hands-on class … so if you have woodturning tools, bring them so you can sharpen and use them in the class!
We are excited to welcome you to our exclusive two-day intensive introduction to the world of hand tools! In this first class of the Hand Tools Mastery Series, students will focus heavily on sharpening skills, layout/marking concepts, and proper setup and usage of essential tools unique to precision hand tool construction. Students will learn about wood science specific to hand tool work, and will immerse in exercises and drills to increase muscle memory proficiency with chisels, hand saws, and hand planes. Throughout this class and the upcoming series, we will explore and practice the wide variety of hand tools which will be key in your ongoing woodworking success. Students are encouraged, but not required, to bring their own personal hand tools, marking and measuring tools, and sharpening stones and jig. If you do not have any of these tools, please do not purchase them in advance (without first talking with the instructor). We will have a wide variety of of types and sizes and brands available for use in class. Hand tool work is a time-honored discipline, and we look forward to launching your mastery of it as you learn how to build fine furniture by hand in this ongoing Hand Tool Mastery series!
If you want to take your pen turning to the next level and have always wanted to know how to turn those segmented works of art, then this is the class for you. This class will provide you with a great hands-on learning experience to understand each of the steps involved in creating a segmented pen. Topics including design, wood selection, accent applications, stock prep, glue-up, turning, and finishing all will be covered. Some finishing may be required at home. Students will take their segmented pen home, as well as their bushing set to make more of their own segmented pens outside of class!
Woodturning 101 is the Class Prerequisite - In the first 30 minutes - Raleigh Lockhart will begin the class with the hands-on brief refresher of the A, B, C and D’s of Woodturning – Focusing on the Foundation of Woodturning and Shop Safety. Balance of the Day – it is ALL about the featured Class Project! This is a hands-on class … so if you have woodturning tools, bring them so you can sharpen and use them in for the class! You will learn Wood and Tool selection to turn your beautiful project.
This is a basic instructional class directed at one of the most useful tools in the entire shop: the bandsaw! Students will learn basic bandsaw safety and operation including rip cutting, cross cutting, re-sawing, and compound cutting. Step by step, we will walk you through essential personal safety as well as care and control of the saw, bandsaw setup, anatomy, blade selection and proper installation, calibration, re-saw drift, and how to get the most out of this valuable tool. During the morning and afternoon sessions, as we discuss these important bandsaw fundamentals, we will put new skills to use with cross cutting, rip cutting, re-sawing, and a bonus mock-up project involving pattern work! All Materials Are Included In The Cost Of Tuition.
In the Morning Session – Raleigh will begin with the A, B, C and D’s of Woodturning – Focusing on the Foundation of Woodturning. This will include lathe history, shop safety, tool selection, sharpening, woodturning tools and wood selection. Raleigh will teach the students all about the different woodturning tools, the different styles, how to sharpen and how to use your woodturning tools. We will go over wood grain, density, moisture content, domestics vs. exotics, how to correctly prepare turning blanks, the various methods of mounting your work on the lathe, and much more. In the Afternoon Session – we will apply your morning skills to turn the Project for this Class. This class is a must to accelerate your skills for turning bowls, boxes, platters, and various woodturning projects. This is a hands-on class … so if you have woodturning tools, bring them so you can sharpen and use them in the class!
Woodturning 101 is the Class Prerequisite - In the first 30 minutes - Raleigh Lockhart will begin the class with the hands-on brief refresher of the A, B, C and D’s of Woodturning – Focusing on the Foundation of Woodturning and Shop Safety. Balance of the Day – it is ALL about the featured Class Project! This is a hands-on class … so if you have woodturning tools, bring them so you can sharpen and use them in for the class! You will learn Wood and Tool selection to turn your beautiful project.
This class is the second in our Pen Making Basics series. Learn the nuances of making a Cigar Pen! This is a hands-on class. Students will turn and assemble their own Cigar Pen, and finish it with a gorgeous, durable, and polished CA finish!
This is a great opportunity to make a 3D cutting board using Alex Snodgrass's method. Using only three different woods - Cherry, Maple, and Peruvian walnut - Barry will show each student how to make a stunning 3D end-grain cutting board. He will begin by teaching each student how to tune a bandsaw to make perfect cuts. Students will then progress through techniques required to build a cutting board: how to make dead-on straight cuts and accurate angled cuts on the bandsaw, and how to plane, sand, glue, and clamp the cutting board. Topics to be covered include: bandsaw myths debunked, bandsaw mechanics, correct blade tension, accurate angle cuts, gluing techniques, end-grain pattern alignment, food-safe finishes, and care and maintenance of cutting boards. By the end of the day, each student will have a fantastic 3D cutting board made with their own hands! This class is designed for woodworkers of all skill levels. From the beginner to the advanced woodworker, every student will leave the class with a 3d cutting board and a smile on their faces! Register today - there is limited enrollment!
The Art of Shaker Oval Box Making: Raleigh Lockhart has been a skilled Shaker Box Maker for many years, and we are excited to be offering a class. Raleigh will begin the class by sharing the rich history and class overview of Shaker Oval Box Making. This will include History for Shaker Box Makers, Shop Safety, Tools used for the class and wood selection. We will then build three classic Shaker Bentwood Keepsakes - this is a great opportunity to learn this lost Art of Shaker Oval Box Making so you too can become a Shaker Box Maker!
Fountain pens are highly-desired classic and elegant writing instruments, both for yourself or for a thoughtful and unique gift. Fountain pens are also very sellable handmade works. In this class, we will teach you how to turn and construct a beautiful fountain pen. This class is an excellent way to get into the art of turning with hands-on lathe experience. Each student will turn and construct a complete fountain pen to take home. All materials are included. Consider making a distinctive fountain pen gift for your graduate, for a unique promotion or retirement gift, or other meaningful milestone which calls for a special celebration!
Woodturning 101 is the Class Prerequisite - In the first 30 minutes - Raleigh Lockhart will begin the class with the hands-on brief refresher of the A, B, C and D’s of Woodturning – Focusing on the Foundation of Woodturning and Shop Safety. Balance of the Day – it is ALL about the featured Class Project! This is a hands-on class … so if you have woodturning tools, bring them so you can sharpen and use them in for the class! You will learn Wood and Tool selection to turn your beautiful project.
In the Morning Session – Raleigh will begin with the A, B, C and D’s of Woodturning – Focusing on the Foundation of Woodturning. This will include lathe history, operations, Shop Safety, tool selection, sharpening, woodturning tool and wood selection. Raleigh will teach the students all about the different woodturning tools, the different grinds, as well as how to choose, sharpen and how to use your woodturning tools. We will go over wood grain, density, moisture content, domestics vs. exotics, how to correctly prepare turning blanks, the various methods of mounting your work on the lathe, and much more. In the Afternoon Session – we will apply your morning skills to turn into the Project for this Class. This class is necessary to accelerate your skills for turning bowls, boxes, platters, and various woodturning projects. This is a hands-on class … so if you have woodturning tools, bring them so you can sharpen and use them in the class!
Woodturning 101 is the Class Prerequisite - In the first 30 minutes - Raleigh Lockhart will begin the class with the hands-on brief refresher of the A, B, C and D’s of Woodturning – Focusing on the Foundation of Woodturning and Shop Safety. Balance of the Day – it is ALL about the featured Class Project! This is a hands-on class … so if you have woodturning tools, bring them so you can sharpen and use them in for the class! You will learn Wood and Tool selection to turn your beautiful project.
This is a basic instructional class focusing on the ever so versatile router. Students will learn basic router safety, operation and adjustment, various router types, when, why, and how to use each type, router components, set-up, common bits, and when and how to use the router table. Step-by-step, we will walk you through the essentials and how to get the most out of this valuable tool. Students will have hands-on experience in class as they apply the principles learned. Reserve your spot early to ensure your enrollment! All Materials Are Included In The Cost Of Tuition.
Proper knife sharpening is a fine and skillful art that you can learn with mindful techniques and a few standard woodworking provisions: waterstones and a leather strop. Woodworkers typically reach for these things to sharpen chisels, plane irons, card scrapers, and the like. However, once you learn to flex these same provisions to sharpen your pocket and kitchen knives, you will dramatically improve your knife utility and culinary safety. You will also learn that each type of knife, each brand, and each shape is unique. You will learn to identify distinct sharpening nuances of many types of blades, differences between the most common waterstones, how and when to choose which one, and how to finely polish and skillfully dress your own knives, which you will bring to class. Also bring your sharpening stones, if you already own them, so that you can acclimate to your own set of tools. (Discounts will be offered to students who wish to purchase during class. However, you do not need to own sharpening stones! We will have stones to use in class.) Students will receive a leather strop to use in class and then take home. A variety of strop compounds will be used and discussed. NOTE: Bring knives that you're comfortable practicing on, because they will become scratched from the waterstones as you learn this technique! No serrated knives, please. All materials are included in the cost of tuition.
This is a great opportunity to make a 3D cutting board using Alex Snodgrass's method. Using only three different woods - maple, cherry, and walnut - Barry will show each student how to make a stunning 3D end-grain cutting board. He will begin by teaching each student how to tune a bandsaw to make perfect cuts. Students will then progress through techniques required to build a cutting board: how to make dead-on straight cuts and accurate angled cuts on the bandsaw, and how to plane, sand, glue, and clamp the cutting board. Topics to be covered include: bandsaw myths debunked, bandsaw mechanics, correct blade tension, accurate angle cuts, gluing techniques, end-grain pattern alignment, food-safe finishes, and care and maintenance of cutting boards. By the end of the day, each student will have a fantastic 3D cutting board made with their own hands! This class is designed for woodworkers of all skill levels. From the beginner to the advanced woodworker, every student will leave the class with a 3d cutting board and a smile on their faces! Register today - there is limited enrollment!
This is an energetic 3-day in-depth introduction to the world of woodworking! Students will learn fundamentals of building fine furniture with our resident custom furniture maker, Brian Hubel (www.brianhubel.com). Topics featured will be wood science, joinery, design, power and hand tools, sharpening, shop safety, and accuracy in construction. Each student will use these newly-acquired skills to build their very own side trestle table. The final finish will be up to the students. Students wishing to learn more about finishing are encouraged to enroll in our hands-on "Applied Finishing" class here in our Colorado Springs store. This class is a prerequisite for Woodworking II, III, and IV here in the Colorado Springs store. Class size for our Woodworking I, II, III, and IV classes is limited to a handful of students. We STRONGLY encourage you to confirm your spot as soon as possible, as classes fill up fast and are only scheduled a few times throughout the year! NOTE: In advance of the class, students will need to choose from the following wood selection, depending on availability at the time of the class: Alder Ash Beech Birch Cherry Mahogany Maple (Non-Figured) Maple (Ambrosia) Oak (Red or White) Sapele Walnut (Black or Peruvian- ask if available) ALL WOOD CHOICES ARE SUBJECT TO AVAILABILITY AT THE TIME OF CLASS. All materials are included in the tuition, and students will take home their tables made in class. The instructor will contact you a week or so before class to discuss your wood choice. We look forward to seeing you there! All materials are included in the cost of tuition. Please Wear Clothing Appropriate For The Wood Shop. This Includes Closed-Toe Shoes, Long Hair Tied Back, No Loose Fitting Clothing Or Loose Cords/Ties (such As Hoodie Ties), No Jewelry.
Woodturning 101 is the Class Prerequisite - In the first 30 minutes - Raleigh Lockhart will begin the class with the hands-on brief refresher of the A, B, C and D’s of Woodturning – Focusing on the Foundation of Woodturning and Shop Safety. Balance of the Day – it is ALL about the featured Class Project! This is a hands-on class … so if you have woodturning tools, bring them so you can sharpen and use them in for the class! You will learn Wood and Tool selection to turn your beautiful project.
Woodturning 101 is the Class Prerequisite - In the first 30 minutes - Raleigh Lockhart will begin the class with the hands-on brief refresher of the A, B, C and D’s of Woodturning – Focusing on the Foundation of Woodturning and Shop Safety. Balance of the Day – it is ALL about the featured Class Project! This is a hands-on class … so if you have woodturning tools, bring them so you can sharpen and use them in for the class! You will learn Wood and Tool selection to turn your beautiful project.
In the Morning Session – Raleigh will begin with the A, B, C and D’s of Woodturning – Focusing on the Foundation of Woodturning. This will include lathe history, operations, Shop Safety, tool selection, sharpening, woodturning tool and wood selection. Raleigh will teach the students all about the different woodturning tools, the different styles and grinds, as well as how to choose, sharpen and how to use your woodturning tools. We will go over wood grain, density, moisture content, domestics vs. exotics, how to correctly prepare turning blanks, the various methods of mounting your work on the lathe, and much more. In the Afternoon Session – we will apply your morning skills to turn Splendid Snowflakes!! Turning Splendid Snowflake is a repeatable woodturning project that you can repeat and wood turn in your home workshop. This class is a must to accelerate your skills for turning bowls, boxes, platters, and various woodturning projects. This is a hands-on class … so if you have woodturning tools, bring them so you can sharpen and use them in the class!
This is a basic instructional class directed at one of the most useful tools in the entire shop: the bandsaw! Students will learn basic bandsaw safety and operation including rip cutting, cross cutting, re-sawing, and compound cutting. Step by step, we will walk you through essential personal safety as well as care and control of the saw, bandsaw setup, anatomy, blade selection and proper installation, calibration, re-saw drift, and how to get the most out of this valuable tool. During the morning and afternoon sessions, as we discuss these important bandsaw fundamentals, we will put new skills to use with cross cutting, rip cutting, re-sawing, and a bonus mock-up project involving pattern work! All Materials Are Included In The Cost Of Tuition.
Woodturning 101 is the Class Prerequisite - In the first 30 minutes - Raleigh Lockhart will begin the class with the hands-on brief refresher of the A, B, C and D’s of Woodturning – Focusing on the Foundation of Woodturning and Shop Safety. Balance of the Day – it is ALL about the featured Class Project! This is a hands-on class … so if you have woodturning tools, bring them so you can sharpen and use them in for the class! You will learn Wood and Tool selection to turn your beautiful project.
Woodturning 101 is the Class Prerequisite - In the first 30 minutes - Raleigh Lockhart will begin the class with the hands-on brief refresher of the A, B, C and D’s of Woodturning – Focusing on the Foundation of Woodturning and Shop Safety. Balance of the Day – it is ALL about the featured Class Project! This is a hands-on class … so if you have woodturning tools, bring them so you can sharpen and use them in for the class! You will learn Wood and Tool selection to turn your beautiful project. “No refunds for Cancellation/Reschedules within 7 days of class date”
In the Morning Session – Raleigh will begin with the A, B, C and D’s of Woodturning – Focusing on the Foundation of Woodturning. This will include lathe history, shop safety, tool selection, sharpening, woodturning tools and wood selection. Raleigh will teach the students all about the different woodturning tools, the different styles, how to sharpen and how to use your woodturning tools. We will go over wood grain, density, moisture content, domestics vs. exotics, how to correctly prepare turning blanks, the various methods of mounting your work on the lathe, and much more. In the Afternoon Session – we will apply your morning skills to turn the Project for this Class. This class is a must to accelerate your skills for turning bowls, boxes, platters, and various woodturning projects. This is a hands-on class … so if you have woodturning tools, bring them so you can sharpen and use them in the class!
This is a 3-day in-depth follow-up to Woodworking I. Students will build on their skills learned in Woodworking I as they apply it to the basics of furniture-style case construction, frame and panel construction, and inset door construction of fine furniture. Other topics covered will include machine-cut dovetail joinery, additional power and hand tools, and ongoing shop safety. Precision design and construction techniques are also covered. Each student will use these newly acquired skills to build their very own beautiful solid wood wall cabinet. Class size is extremely limited, so please confirm your spot early!! Some explanations and pointers on finishing will be discussed in this class, but the final finish will be up to the student. Students wishing to learn more about finishing are encouraged to enroll in our informative "Finishing Basics" lecture class here in our Colorado Springs store. NOTE: All materials are included in the tuition, and each student will take home their wall cabinets. In advance of the class, students will need to choose from the following selection of wood, depending on availability at the time of the class: Alder Ash Beech Birch Cherry Mahogany Maple (Non-Figured) Maple (Ambrosia) Oak (Red or White) Sapele Walnut (Black or Peruvian- ask if available) ALL WOOD CHOICES ARE SUBJECT TO AVAILABILITY AT THE TIME OF CLASS. The instructor will contact you a week or so in advance to discuss your wood choice. We STRONGLY encourage you to confirm your spot as soon as possible, as classes fill up fast and are only scheduled a few times throughout the year. We look forward to seeing you there! All materials are included in the cost of tuition. Please Wear Clothing Appropriate For The Wood Shop. This Includes Closed-Toe Shoes, Long Hair Tied Back, No Loose Fitting Clothing Or Loose Cords/Ties (such As Hoodie Ties), No Jewelry.
This class will take you into the world of small box making with power tools. Small boxes can be very simple to extremely elegant, from a simple recipe caddy to an intricate heirloom treasury. Once you learn the fundamental techniques and how to use the dovetail jig, you can make just about any style in any size for any purpose which your dovetail jig accommodates. Students will focus on the half-blind dovetail in this class, with a raised panel lid and contrasting woods. Other variations will also be discussed. Your instructor will provide a variety of beautiful woods from which you will choose for your in-class project. Species for each class will be subject to availability at the time of class. At the end of Day 2, each student will take home a box of their own. Time permitting, application of a finish will be discussed, but final finishing will be up to the student. Students wishing to learn about finishing in-depth should enroll in our Applied Finishing class, and bring their bare wood boxes to learn all about finishing and apply finish during that class.
Woodturning 101 is a Class Prerequisites - In the first 30 minutes - Raleigh Lockhart will begin the class with a brief refresher of the A, B, C and D’s of Woodturning – Focusing on the Foundation of Woodturning and Shop Safety. The balance of the day – it’s ALL about the featured Class Project! This is a hands-on class so if you have woodturning tools, bring them so you can sharpen and use them in for the class! You will learn Wood and Tool selection to turn your beautiful project.
In the Morning Session – Raleigh will begin with the A, B, C and D’s of Woodturning – Focusing on the Foundation of Woodturning. This will include lathe history, shop safety, tool selection, sharpening, woodturning tools and wood selection. Raleigh will teach the students all about the different woodturning tools, the different styles, how to sharpen and how to use your woodturning tools. We will go over wood grain, density, moisture content, domestics vs. exotics, how to correctly prepare turning blanks, the various methods of mounting your work on the lathe, and much more. In the Afternoon Session – we will apply your morning skills to turn the Project for this Class. This class is a must to accelerate your skills for turning bowls, boxes, platters, and various woodturning projects. This is a hands-on class … so if you have woodturning tools, bring them so you can sharpen and use them in the class!
Woodturning 101 is a Class Prerequisite - In the first 30 minutes - Raleigh Lockhart will begin the class with a brief refresher of the A, B, C and D’s of Woodturning – Focusing on the Foundation of Woodturning and Shop Safety. The balance of the day – it’s ALL about the featured Class Project! This is a hands-on class so if you have woodturning tools, bring them so you can sharpen and use them in for the class! You will learn Wood and Tool selection to turn your beautiful project.
This is an energetic 3-day in-depth introduction to the world of woodworking! Students will learn fundamentals of building fine furniture with our resident custom furniture maker, Brian Hubel (www.brianhubel.com). Topics featured will be wood science, joinery, design, power and hand tools, sharpening, shop safety, and accuracy in construction. Each student will use these newly-acquired skills to build their very own side trestle table. The final finish will be up to the students. Students wishing to learn more about finishing are encouraged to enroll in our hands-on "Applied Finishing" class here in our Colorado Springs store. This class is a prerequisite for Woodworking II, III, and IV here in the Colorado Springs store. Class size for our Woodworking I, II, III, and IV classes is limited to a handful of students. We STRONGLY encourage you to confirm your spot as soon as possible, as classes fill up fast and are only scheduled a few times throughout the year! NOTE: In advance of the class, students will need to choose from the following wood selection, depending on availability at the time of the class: Alder Ash Beech Birch Cherry Mahogany Maple (Non-Figured) Maple (Ambrosia) Oak (Red or White) Sapele Walnut (Black or Peruvian- ask if available) ALL WOOD CHOICES ARE SUBJECT TO AVAILABILITY AT THE TIME OF CLASS. All materials are included in the tuition, and students will take home their tables made in class. The instructor will contact you a week or so before class to discuss your wood choice. We look forward to seeing you there! All materials are included in the cost of tuition. Please Wear Clothing Appropriate For The Wood Shop. This Includes Closed-Toe Shoes, Long Hair Tied Back, No Loose Fitting Clothing Or Loose Cords/Ties (such As Hoodie Ties), No Jewelry.
This is a great opportunity to make a 3D cutting board using Alex Snodgrass's method. Using only three different woods - maple, cherry, and Peruvian walnut - Barry will show each student how to make a stunning 3D end-grain cutting board. He will begin by teaching each student how to tune a bandsaw to make perfect cuts. Students will then progress through techniques required to build a cutting board: how to make dead-on straight cuts and accurate angled cuts on the bandsaw, and how to plane, sand, glue, and clamp the cutting board. Topics to be covered include: bandsaw myths debunked, bandsaw mechanics, correct blade tension, accurate angle cuts, gluing techniques, end-grain pattern alignment, food-safe finishes, and care and maintenance of cutting boards. By the end of the day, each student will have a fantastic 3D cutting board made with their own hands! This class is designed for woodworkers of all skill levels. From the beginner to the advanced woodworker, every student will leave the class with a 3d cutting board and a smile on their faces! Register today - there is limited enrollment!
This is a 4-day comprehensive fine furniture building continuation of Woodworking I and II. The primary focus of this advanced class is compound cutting on the bandsaw and and shaping with a new set of skills and tools not previously introduced. Other topics covered will include floating table top design techniques and integrated apron construction, structure and functionality, and precision jig work for exposed dowel joinery. Developing upon the skills and techniques learned in Woodworking I and II, students will build a beautiful high-end console, entry, or hall table. Leg and apron wood selection is up to the instructor, and is subject to wood availability at the time of the class. Students will be asked to choose and purchase wood for their table top and lower shelf. Consultation with the instructor is required no later than one week prior to class, and student's wood choice must be pre-approved and provided to the instructor no later than one week prior to class. NOTE: Please do NOT wait until the last minute for this! If your wood selection does not work with the project, you will need to identify, purchase, and provide an appropriate alternate to the instructor no later than one week prior to class. At the end of class, students will have completed their table to take home. The final finish will be up to the student. Students wishing to learn more about finishing are encouraged to enroll in our hands-on "Finishing Basics" class here in our Colorado Springs store. NOTE: This class is scheduled only once or twice per year, and class size is limited. Please confirm your spot early, as this class is not scheduled very often!!! Standby students and partial payments will be accepted, but full payment is required to confirm your enrollment. Please Wear Clothing Appropriate For The Wood Shop. This Includes Closed-Toe Shoes, Long Hair Tied Back, No Loose Fitting Clothing Or Loose Cords/Ties (such As Hoodie Ties), No Jewelry. Students must provide their table top and lower shelf material. Please see class description.
The Art of Shaker Oval Box Making: Raleigh Lockhart has been a skilled Shaker Box Maker for many years, and we are excited to be offering a class. Raleigh will begin the class by sharing the rich history and class overview of Shaker Oval Box Making. This will include History for Shaker Box Makers, Shop Safety, Tools used for the class and wood selection. We will then build three classic Shaker Bentwood Keepsakes - this is a great opportunity to learn this lost Art of Shaker Oval Box Making so you too can become a Shaker Box Maker!
In the Morning Session – We will begin with the A, B, C and D’s of Woodturning – Focusing on the Foundation of Woodturning. This will include lathe history, Shop Safety, tool selection, sharpening, woodturning tools and wood selection. We will also discuss with the students the different woodturning tools available, the different styles, we will demonstrate how to sharpen and how to use your woodturning tools. We will go over wood grain, density, moisture content, domestics vs. exotics, how to correctly prepare turning blanks, the various methods of mounting your work on the lathe, and much more. In the Afternoon Session – we will apply your morning skills to turn the Project for this Class. This class is a must to accelerate your skills for turning bowls, boxes, platters, and various woodturning projects. This is a hands-on class … so if you have woodturning tools, bring them so you can sharpen and use them in the class!
This is a basic instructional class directed at one of the most useful tools in the entire shop: the table saw. Students will learn basic table saw safety and operation in-depth. Step-by-step, we will walk you through table saw setup, essential personal safety, care and control of the saw, table saw anatomy, blade selection and proper installation, calibration, and how to safely get the most out of this valuable tool. We will be working specifically with the SawStop, and we'll learn the features specific to SawStop technology. However, the processes we cover apply to all table saws, and this class is for students who wish to learn about all table saws in general. Students will have hands-on experience in class as they apply the principles learned. This is not a project class, but rather a comprehensive master class on table saw essentials. These are small classes! Confirm your enrollment as soon as possible to ensure your spot in class. All Materials Are Included In The Cost Of Tuition.
Wood selection, layout, and stock preparation is key to any successful woodworking project. We will break it down for you in this interactive class. Students will have hands-on practical experience choosing the proper wood, allowing for expansion and contraction, calculating board footage, considering grain direction, knots, and other considerations, and accounting for fundamental characteristics of both lumber and man-made materials such as MDF and plywood. Using a combination of hand and power tools, students will take a board from its rough form to material that is straight, flat, square, and ready for use. Whether you have hand tools or power tools in your shop, we will learn the techniques to prep stock both ways. Students will be exposed to a wide variety of tools and machinery, to include the table saw, bandsaw, planer, jointer, drum sander, and hand planes, and marking tools. Tuition includes all materials. This class is open to any and all students and skill levels. It is a recommended (but not required) companion to many of our other classes, including our fine furniture series (Woodworking I, II, III, and IV), all Small Project Series classes (Charcuterie, box-making, etc.), and any class or project involving solid stock.
Woodturning 101 is a Class Prerequisite - In the first 30 minutes – We will begin the class with a brief refresher of the A, B, C and D’s of Woodturning – Focusing on the Foundation of Woodturning and Shop Safety. The balance of the day – it’s ALL about the featured Class Project! This is a hands-on class so if you have woodturning tools, bring them so you can sharpen and use them in for the class! You will learn Wood and Tool selection to turn your beautiful project.
Woodturning 101 is a Class Prerequisites - In the first 30 minutes - Raleigh Lockhart will begin the class with a brief refresher of the A, B, C and D’s of Woodturning – Focusing on the Foundation of Woodturning and Shop Safety. The balance of the day – it’s ALL about the featured Class Project! This is a hands-on class so if you have woodturning tools, bring them so you can sharpen and use them in for the class! You will learn Wood and Tool selection to turn your beautiful project.
In the Morning Session – Raleigh will begin with the A, B, C and D’s of Woodturning – Focusing on the Foundation of Woodturning. This will include lathe history, shop safety, tool selection, sharpening, woodturning tools and wood selection. Raleigh will teach the students all about the different woodturning tools, the different styles, how to sharpen and how to use your woodturning tools. We will go over wood grain, density, moisture content, domestics vs. exotics, how to correctly prepare turning blanks, the various methods of mounting your work on the lathe, and much more. In the Afternoon Session – we will apply your morning skills to turn the Project for this Class. This class is a must to accelerate your skills for turning bowls, boxes, platters, and various woodturning projects. This is a hands-on class … so if you have woodturning tools, bring them so you can sharpen and use them in the class!
The Art of Shaker Oval Box Making: Raleigh Lockhart has been a skilled Shaker Box Maker for many years, and we are excited to be offering a class. Raleigh will begin the class by sharing the rich history and class overview of Shaker Oval Box Making. This will include History for Shaker Box Makers, Shop Safety, Tools used for the class and wood selection. We will then build three classic Shaker Bentwood Keepsakes - this is a great opportunity to learn this lost Art of Shaker Oval Box Making so you too can become a Shaker Box Maker!
In the Morning Session – Raleigh will begin with the A, B, C and D’s of Woodturning – Focusing on the Foundation of Woodturning. This will include lathe history, shop safety, tool selection, sharpening, woodturning tools and wood selection. Raleigh will teach the students all about the different woodturning tools, the different styles, how to sharpen and how to use your woodturning tools. We will go over wood grain, density, moisture content, domestics vs. exotics, how to correctly prepare turning blanks, the various methods of mounting your work on the lathe, and much more. In the Afternoon Session – we will apply your morning skills to turn the Project for this Class. This class is a must to accelerate your skills for turning bowls, boxes, platters, and various woodturning projects. This is a hands-on class … so if you have woodturning tools, bring them so you can sharpen and use them in the class!
This is a great opportunity to make a 3D cutting board using Alex Snodgrass's method. Using only three different woods - maple, cherry, and Peruvian walnut - Barry will show each student how to make a stunning 3D end-grain cutting board. He will begin by teaching each student how to tune a bandsaw to make perfect cuts. Students will then progress through techniques required to build a cutting board: how to make dead-on straight cuts and accurate angled cuts on the bandsaw, and how to plane, sand, glue, and clamp the cutting board. Topics to be covered include: bandsaw myths debunked, bandsaw mechanics, correct blade tension, accurate angle cuts, gluing techniques, end-grain pattern alignment, food-safe finishes, and care and maintenance of cutting boards. By the end of the day, each student will have a fantastic 3D cutting board made with their own hands! This class is designed for woodworkers of all skill levels. From the beginner to the advanced woodworker, every student will leave the class with a 3d cutting board and a smile on their faces! Register today - there is limited enrollment!
The Art of Shaker Oval Box Making: Raleigh Lockhart has been a skilled Shaker Box Maker for many years, and we are excited to be offering a class. Raleigh will begin the class by sharing the rich history and class overview of Shaker Oval Box Making. This will include History for Shaker Box Makers, Shop Safety, Tools used for the class and wood selection. We will then build three classic Shaker Bentwood Keepsakes - this is a great opportunity to learn this lost Art of Shaker Oval Box Making so you too can become a Shaker Box Maker!
This is a great opportunity to make a 3D cutting board using Alex Snodgrass's method. Using only three different woods - maple, cherry, and Peruvian walnut - Barry will show each student how to make a stunning 3D end-grain cutting board. He will begin by teaching each student how to tune a bandsaw to make perfect cuts. Students will then progress through techniques required to build a cutting board: how to make dead-on straight cuts and accurate angled cuts on the bandsaw, and how to plane, sand, glue, and clamp the cutting board. Topics to be covered include: bandsaw myths debunked, bandsaw mechanics, correct blade tension, accurate angle cuts, gluing techniques, end-grain pattern alignment, food-safe finishes, and care and maintenance of cutting boards. By the end of the day, each student will have a fantastic 3D cutting board made with their own hands! This class is designed for woodworkers of all skill levels. From the beginner to the advanced woodworker, every student will leave the class with a 3d cutting board and a smile on their faces! Register today - there is limited enrollment!
This is a great opportunity to make a 3D cutting board using Alex Snodgrass's method. Using only three different woods - maple, cherry, and Peruvian walnut - Barry will show each student how to make a stunning 3D end-grain cutting board. He will begin by teaching each student how to tune a bandsaw to make perfect cuts. Students will then progress through techniques required to build a cutting board: how to make dead-on straight cuts and accurate angled cuts on the bandsaw, and how to plane, sand, glue, and clamp the cutting board. Topics to be covered include: bandsaw myths debunked, bandsaw mechanics, correct blade tension, accurate angle cuts, gluing techniques, end-grain pattern alignment, food-safe finishes, and care and maintenance of cutting boards. By the end of the day, each student will have a fantastic 3D cutting board made with their own hands! This class is designed for woodworkers of all skill levels. From the beginner to the advanced woodworker, every student will leave the class with a 3d cutting board and a smile on their faces! Register today - there is limited enrollment!