Join Dave in this class on learning how to use a router template jig. In this class we will discuss how to use different types of templates for a variety of projects. As part of the class, you will receive a Woodriver growth chart router template (including the necessary bushing and router bit) which you will use during the class to make a 6' growth chart to take home with you.
Join Arden as she takes you through a woodworking 101 class designed specifically for anyone who is new to woodworking or feels uncomfortable in a traditional woodshop. You'll be making a functional mallet by using and getting acquainted with all the major tools- bandsaw, router table, table saw, jointer, planer, sander, and miter saw. While you'll make a functional tool to add to or start your workshop, the emphasis of the day is safety and getting comfortable using large power tools.
In this class, you will learn the basics of pyrography or wood burning. You will learn the 3 main tips or pens used, review temperature issues, safety, burn ideas, and wood materials. You will also learn image transfer, line work, and shading. By the end of the class, you will have a project to take home.
Learn how to set up your bandsaw for precision cutting and create a beautiful bandsaw box with a drawer from a single block of wood. In this hands-on class, you’ll master scrolling techniques, hollowing out a drawer, and finishing your box for a polished look. ✔ Perfect for all skill levels ✔ Take home a handmade bandsaw box ✔ Boost your woodworking confidence Sign up today and transform a simple block of wood into a stunning keepsake!
Intarsia is a scrollsaw technique whereby you cut different species of wood into varied shapes to create a mosaic like picture. Each piece is sanded and formed to give the appearance of depth. Segmentation offers all of the same cutting and shaping skills of intarsia, but uses only one species of wood which is then stained or painted to achieve the colors you desire. In this class you will be doing segmentation to acquire the cutting and shaping skills needed for intarsia. When you are finished with this class you will have a better understanding of the skills needed to do an intarsia piece.
Using resins and epoxies can help create beautiful projects, but which resin or epoxy is right for the job? Do I use a urethane resin or do I use an epoxy? (Wait, there’s a difference?!) How deep can I pour my resin or epoxy? What happens if I don’t mix using the correct ratio of resin/epoxy to hardener? How much do I pour? These are all questions (and then some) that will be answered during this class. In this two day class, we will be using the Jess Crow HDPE Reusable Forms to create a hybrid wood and epoxy cutting (or charcuterie) board. Day one will consist of a discussion about resin or epoxy and by the end of day one, students will pour TotalBoat ThickSet epoxy into an HDPE form that will become their own creation that they take home after day two. On day two (one week later), students will work with their demolded creations to flatten them and turn them into beautiful cutting boards or charcuterie boards that they will finish (during the class) and take home.
Are you looking to take your spindle turning to the next level? In this class we will go over the basics of doing an inside out turn while creating a candle holder. We will cover everything from preparing your stock to the various turns, and the final assembly of your piece.
Why are hand planes so expensive? Why can’t I get thin curling shavings like the YouTubers I watch? What do I do with this old plane my grandfather left me? Do I need a hand plane in this tech friendly new world? In this class you will learn the answers to these questions and more, including plane setup, tuning, maintenance, sharpening, selection, and use. This beginner friendly class will take you through the different kinds of hand planes and allow you to get some hands on experience. Students are encouraged to bring their own planes to setup and tune, but planes will be provided for those still deciding to buy. Tuition includes the book "Getting Started with Hand Planes" by Scott Wynn for you to keep and continue your education.
Enjoy a different evening of recreation with your partner. Not your typical date . Spend an evening with your partner learning about basic wood turning by making a pair of pens. Art will take you through the steps of turning a wooden pen on the lathe. A 10% discount coupon will be granted for the purchase of of pen kits & supplies as well as lathe related tools after the class
This class will cover the basic steps required and answer your questions as you turn your first bowl. Do I want to turn green wood or dry blanks? I don't live on a farm, where do I find the logs to make green blanks? I found someone who wants a tree cut up, what's the best way to cut and store the logs? Where do I find dry blanks? Do they turn different than green blanks? Do I want to use conventional or carbide tools? We will spend the first part of the class discussing these issues as well as any others that you may have – Dave will explain the various choices and alternatives as well as demonstrate the basic mounts and steps involved in making a bowl. Late morning each student will have an opportunity to practice each tool on the practice blank Dave has mounted. Then each student will take a blank "from the tree to the table." A 10% discount will be granted to each student on most hand and lathe tools and accessories the day of the class.
If you are a new turner or considering the purchase of a lathe or trying your hand at turning, this class will help you get started in the right direction. The first in a series by Dave Sanborn designed specifically for the new or prospective turners; this class will cover basic features and options available for the lathe itself as well as available accessories and tools. In the morning, Dave will demonstrate and discuss the basics of Conventional and Carbide tools; Spindle, Bowl, and Pen turning; and various accessories. In the afternoon, you will do some hands on exercises and make a Mallet that will be a valuable addition to your workshop. A 10% discount on most accessories and hand tools will be granted to each student the day of the class.
Eccentric- someone or something that is unusual or off center. Typically being off center while turning is a bad thing, but what if you did it intentionally? In this class you will be introduced to offset turning, its uses, and create a mallet using 2 different techniques of offset turning.
If you’re interested in hand tools and hand cut joinery, this series is for you! Take one or all, at your own pace and in your own order. Starting with the basics, this class will teach proper handsaw use and care. We will run through drills and warm ups used to insure you get a good straight cut when you are making your joints. This half day class is a prerequisite for all the Intermediate level joinery classes, but can also be taken on its own to provide you with a solid background in any cutting by hand, from felling trees to flush cutting dowels. Tuition includes a gents handle dovetail saw that will be used in class and will make a good starting point for any beginner hand saw aficionado.
Take your scroll saw skills to the next level with this Introduction to Segmentation class. This hands-on workshop is perfect for those looking to explore segmentation, a technique that adds depth and dimension to woodworking projects. In this class, you will create a simple segmented design using a single wood species, shaping, sanding, staining, and finishing your piece to achieve a polished final look. The focus will be on cutting, shaping, and assembly techniques, giving you the skills to enhance your scroll saw projects with layered and contoured details. This class is designed for those who have experience using a scroll saw or have completed a basic scroll saw class. Join us and learn how to bring your scroll saw projects to life with segmentation!
If you’re interested in hand tools and hand cut joinery, this series is for you! Take one or all, at your own pace and in your own order. The lap joint is one of the easiest and most used joints in woodworking. Offering more strength than a butt joint and less complexity than a dovetail, a lap joint can be used to make sturdy furniture or decorative corners. Students will make 2 joints in the class, a standard half lap and then a mitered half lap for aesthetic and strength.
Join us for a fun and rewarding scroll saw woodworking class where you’ll build a fully functional hanging birdfeeder featuring a beautiful bird-in-a-tree silhouette design. This eye-catching project will bring both craftsmanship and charm to any backyard. You’ll learn: • Scroll saw safety and setup • Cutting interior designs with precision • Assembly techniques for functional outdoor projects • Tips for wood choice, finishing, and outdoor protection. Each student will complete a birdfeeder just like the example shown in class, ready to fill with seed and hang in your yard. This class is perfect for beginners and intermediate scrollers who want to build confidence while creating something practical and decorative. All tools and materials are provided — just bring yourself and be ready to learn. Take home a handmade birdfeeder that invites wildlife right to your window… and proudly display your scrolling skills!
If you’re interested in hand tools and hand cut joinery, this series is for you! Take one or all, at your own pace and in your own order. The mortise and tenon is the basis for many different kinds of joints, from blind hidden joints to decorative wedges. We will be chopping out the mortise by hand with chisels, and learning how to layout a matched tenon so the joint goes together perfectly. We will also discuss the many iterations of this joint and students will have the option to create one of the more challenging and decorative options as well.
Build this adirondack chair with the included template kit. You will use the table saw, jointer, band saw and router table to build this comfortable chair. At the end of this two day class you will leave with a completed chair ready for finish and template kit to build additional chairs, Dave will also discuss various finishing options. Chair will be built with weather resistant wood.
If you have been looking to get started in woodworking, the scroll saw is just the ticket. The scroll saw is a quiet and easy-to-use machine that will produce a wide variety of great projects. It can be used for creating fine, complex shapes and patterns such as fretwork, marquetry, intarsia, and inlay. This workshop is project oriented - designed for beginners just getting started or woodworkers wishing to expand their knowledge and skill level. Topics include blade selection, tension, pattern use, piercing, speeds, feed rates and cutting techniques. We will discuss scroll saw features, types, and what to look for when choosing a scroll saw. The goal for this workshop is for each student to have fun with woodworking, go home with a completed project and the inspiration to try more on their own.
Take your scroll saw skills to the next level with this Introduction to Segmentation class. This hands-on workshop is perfect for those looking to explore segmentation, a technique that adds depth and dimension to woodworking projects. In this class, you will create a simple segmented design using a single wood species, shaping, sanding, staining, and finishing your piece to achieve a polished final look. The focus will be on cutting, shaping, and assembly techniques, giving you the skills to enhance your scroll saw projects with layered and contoured details. This class is designed for those who have experience using a scroll saw or have completed a basic scroll saw class. Join us and learn how to bring your scroll saw projects to life with segmentation!
Everyone needs a Pepper mill and they make a useful piece of tableware! During this class you will learn spindle turning, finishing and drilling techniques and various mounting methods required to make the pepper mill. A 10% discount is granted to each student on most hand and lathe tools as well as accessories on the day of the class.
Creativity is allowing yourself to make mistakes. Art is knowing which ones to keep. Often the sawmills will cut their best highly figured pieces thin for the cabinet and furniture makers. Thin material can be turned successfully. Learn mounting techniques that will enable you to turn an odd shaped blank or platter from stock without sacrificing your prime wood in the process of making the tenon. This class will give you inspiring ideas for developing your own woodturning style. Come join Dave and turn a Wooden Platter. A 10% discount will be granted to each student on most hand and lathe tools as well as accessories on the day of the class.
This class will cover the basic steps required and answer your questions as you turn your first bowl. Do I want to turn green wood or dry blanks? I don't live on a farm, where do I find the logs to make green blanks? I found someone who wants a tree cut up, what's the best way to cut and store the logs? Where do I find dry blanks? Do they turn different than green blanks? Do I want to use conventional or carbide tools? We will spend the first part of the class discussing these issues as well as any others that you may have – Dave will explain the various choices and alternatives as well as demonstrate the basic mounts and steps involved in making a bowl. Late morning each student will have an opportunity to practice each tool on the practice blank Dave has mounted. Then each student will take a blank (using carbide tools) "from the tree to the table." A 10% discount will be granted to each student on most hand and lathe tools and accessories the day of the class.
Using resins and epoxies can help create beautiful projects, but which resin or epoxy is right for the job? Do I use a urethane resin or do I use an epoxy? (Wait, there’s a difference?!) How deep can I pour my resin or epoxy? What happens if I don’t mix using the correct ratio of resin/epoxy to hardener? How much do I pour? These are all questions (and then some) that will be answered during this class. In this two day class, we will be using the Jess Crow HDPE Reusable Forms to create a hybrid wood and epoxy cutting (or charcuterie) board. Day one will consist of a discussion about resin or epoxy and by the end of day one, students will pour TotalBoat ThickSet epoxy into an HDPE form that will become their own creation that they take home after day two. On day two (one week later), students will work with their demolded creations to flatten them and turn them into beautiful cutting boards or charcuterie boards that they will finish (during the class) and take home.
Learn how to turn a box with a lid on the lathe from one solid blank. We will discuss some common pitfalls and do's and don't while learning the basic techniques for making a vessel with a fitting lid on the lathe.
Why are hand planes so expensive? Why can’t I get thin curling shavings like the YouTubers I watch? What do I do with this old plane my grandfather left me? Do I need a hand plane in this tech friendly new world? In this class you will learn the answers to these questions and more, including plane setup, tuning, maintenance, sharpening, selection, and use. This beginner friendly class will take you through the different kinds of hand planes and allow you to get some hands on experience. Students are encouraged to bring their own planes to setup and tune, but planes will be provided for those still deciding to buy. Tuition includes the book "Getting Started with Hand Planes" by Scott Wynn for you to keep and continue your education.
If you’re interested in hand tools and hand cut joinery, this series is for you! Take one or all, at your own pace and in your own order. Starting with the basics, this class will teach proper handsaw use and care. We will run through drills and warm ups used to insure you get a good straight cut when you are making your joints. This half day class is a prerequisite for all the Intermediate level joinery classes, but can also be taken on its own to provide you with a solid background in any cutting by hand, from felling trees to flush cutting dowels. Tuition includes a gents handle dovetail saw that will be used in class and will make a good starting point for any beginner hand saw aficionado.
The Router is quickly becoming one of the most useful tools in the workshop, but where does one begin. In this informative class, we will take you from start to finish and help you get the most from your router. Topics covered will be safety, bit selection, router size, proper use, maintenance , and table use. Students will be able to make practice cuts with hand held and the router table. Routers will be provided, however you may bring your own subject to the instructors evaluation of it's safe operation. A 10% discount on most accessories and hand tools will be granted to each student the day of the class.
Join Woodcraft for a unique date night! Bring your favorite person by and make a matched set of river charcuterie boards and cheese knives, handcrafted together for the next at home date night you plan. Whether you’re brand new to woodworking or seasoned veterans, you’ll learn something new during this night class and have a great time doing it! Each couple will take home 2 charcuterie boards and 2 cheese knives at the end of the class.
Join Arden as she takes you through a woodworking 101 class designed specifically for anyone who is new to woodworking or feels uncomfortable in a traditional woodshop. You'll be making a functional mallet by using and getting acquainted with all the major tools- bandsaw, router table, table saw, jointer, planer, sander, and miter saw. While you'll make a functional tool to add to or start your workshop, the emphasis of the day is safety and getting comfortable using large power tools.
If you’re interested in hand tools and hand cut joinery, this series is for you! Take one or all, at your own pace and in your own order. The most popular and strongest of the hand cut joints, the dovetail is considered by many to be the ultimate show of precision, strength, and artistry. In this class we will be focusing on the origins of the dovetail, when it was used on a daily basis because of its strength instead of its appearance. In one night you will learn layout, precise measurements, cut matching pins and tails, and at the end of the day have a functional dovetail joint cut by hand.
This class is a full day introduction to turning pens, both wood and resin. No experience is needed. Art will introduce novices to lathe safety and operation. The morning will be devoted to the set up and turning a wood pen and detachable key ring. The afternoon will focus on resin & acrylics and be completed with turning a resin pen and keyring.
Intarsia is a scrollsaw technique whereby you cut different species of wood into varied shapes to create a mosaic like picture. Each piece is sanded and formed to give the appearance of depth. Segmentation offers all of the same cutting and shaping skills of intarsia, but uses only one species of wood which is then stained or painted to achieve the colors you desire. In this class you will be doing segmentation to acquire the cutting and shaping skills needed for intarsia. When you are finished with this class you will have a better understanding of the skills needed to do an intarsia piece.
Participants will learn the correct use and safety practices when working with the planer, jointer, table saw, miter saw and router. We will first use the machines to mill rough cut lumber into dimensioned boards. The next step is to glue up the dimensioned lumber into a board that will be finished into a charcuterie board with the planer and router . A discussion on appropriate finishes will close the class.
Unlock the full potential of your bandsaw in this hands-on workshop. We'll begin with essential setup and maintenance to ensure your saw performs at its best, then explore creative techniques like resawing, curve cutting, and tapering. Learn to make smooth, precise cuts and create decorative patterns with confidence. This class will also include a fun, small project to help you practice your new skills. Whether you're just starting or want to expand your bandsaw expertise, this workshop is perfect for taking your woodworking to the next level.
Join Alex Snodgrass, the leading authority on the bandsaw, for an in-depth seminar on unlocking the full potential of your bandsaw. Participants will learn how to fine tune a bandsaw for smoother cuts and greater accuracy. He will also demonstrate how Carter Products accessories extend the tool’s range. Guides, mag fence, blades, inserts and a circle cutter will be highlighted for their role in precise and efficient work. The seminar will also include a brief segment on Titebond® glues, focusing on the optimal types for various woodworking projects. This seminar lays the groundwork for Alex’s box building class, offering students the chance to learn directly from a respected authority in woodworking. Sign up NOW! Seating is limited.
Renowned bandsaw master Alex Snodgrass will lead a hands-on class devoted to building two striking projects: a four-drawer pin box and a two-drawer wave box. Instruction covers setup, cutting techniques and safe shaping methods while Alex guides participants step by step and answers questions throughout the process. He also reveals the secrets behind his signature designs, including magnetic boxes, push button boxes, the gravity pin box and an articulated snake. Additionally, participants will receive exclusive access to a private video showcasing the completed projects, extending the learning beyond the classroom. By the end of the day, students not only complete two boxes but also gain the rare chance to learn directly from a legend in the craft, leaving with the skills and confidence to create almost any style of bandsaw box. Secure your spot TODAY. Class size is limited to 10. $335 class cost includes the $35 materials cost.
Create a beautiful keepsake music box while learning some basic box making and layout skills. We will use the table saw, router table, planer, jointer, and drill press to complete the project. Time permitting, we will use the laser engraver to add a personal touch.
If you have been looking to get started in woodworking, the scroll saw is just the ticket. The scroll saw is a quiet and easy-to-use machine that will produce a wide variety of great projects. It can be used for creating fine, complex shapes and patterns such as fretwork, marquetry, intarsia, and inlay. This workshop is project oriented - designed for beginners just getting started or woodworkers wishing to expand their knowledge and skill level. Topics include blade selection, tension, pattern use, piercing, speeds, feed rates and cutting techniques. We will discuss scroll saw features, types, and what to look for when choosing a scroll saw. The goal for this workshop is for each student to have fun with woodworking, go home with a completed project and the inspiration to try more on their own.
This class will cover the basic steps required and answer your questions as you turn your first bowl. Do I want to turn green wood or dry blanks? I don't live on a farm, where do I find the logs to make green blanks? I found someone who wants a tree cut up, what's the best way to cut and store the logs? Where do I find dry blanks? Do they turn different than green blanks? Do I want to use conventional or carbide tools? We will spend the first part of the class discussing these issues as well as any others that you may have – Dave will explain the various choices and alternatives as well as demonstrate the basic mounts and steps involved in making a bowl. Late morning each student will have an opportunity to practice each tool on the practice blank Dave has mounted. Then each student will take a blank (using carbide tools) "from the tree to the table." A 10% discount will be granted to each student on most hand and lathe tools and accessories the day of the class.
Why are hand planes so expensive? Why can’t I get thin curling shavings like the YouTubers I watch? What do I do with this old plane my grandfather left me? Do I need a hand plane in this tech friendly new world? In this class you will learn the answers to these questions and more, including plane setup, tuning, maintenance, sharpening, selection, and use. This beginner friendly class will take you through the different kinds of hand planes and allow you to get some hands on experience. Students are encouraged to bring their own planes to setup and tune, but planes will be provided for those still deciding to buy. Tuition includes the book "Getting Started with Hand Planes" by Scott Wynn for you to keep and continue your education.
If you have mastered basic bowl turning and/or are not satisfied with the results you are getting from carbide tools and want to jump to the next level, then this is the class for you. In this class we will cover the use of various traditional tool techniques to achieve the best possible finish on your bowl prior to sanding using both carbide and conventional scrapers and gouges. Dave will also show you a few "tricks" and techniques to enhance the quality of troublesome soft/punky wood and reduce tare-out and enhance sanding. We will also cover the basics of sharpening both gouges and scrapers - sharp tools are essential for a quality finish. We will end with discussion and demonstration of various final finishes and the use of the Beal Buffing System. Students will be granted a 10% disount on most accessories and hand tools the day of the class.
Unlock the full potential of your bandsaw in this hands-on workshop. We'll begin with essential setup and maintenance to ensure your saw performs at its best, then explore creative techniques like resawing, curve cutting, and tapering. Learn to make smooth, precise cuts and create decorative patterns with confidence. This class will also include a fun, small project to help you practice your new skills. Whether you're just starting or want to expand your bandsaw expertise, this workshop is perfect for taking your woodworking to the next level.
If you own Adirondack Chairs or built one at one of our classes, this end table will make a useful addition to your outside furniture. The table will be made out of weather resistant wood and provide years of enjoyment. You will be using the Festool Domino to join the slats together and align the legs together as well as the Kreg pocket hole system to attach the top to the base.
This class will review and apply the steps to building a basic kitchen cabinet. We will use the Kreg pocket hole system and Kreg cutting system to build a cabinet carcass from plywood, with a solid wood face frame. You will have the opportunity to use the table saw,planern jointer and router table as well. After your cabinet is built, we will build and install a door and a drawer with the appropriate hardware on the second day.
Take your scroll saw skills to the next level with this Introduction to Segmentation class. This hands-on workshop is perfect for those looking to explore segmentation, a technique that adds depth and dimension to woodworking projects. In this class, you will create a simple segmented design using a single wood species, shaping, sanding, staining, and finishing your piece to achieve a polished final look. The focus will be on cutting, shaping, and assembly techniques, giving you the skills to enhance your scroll saw projects with layered and contoured details. This class is designed for those who have experience using a scroll saw or have completed a basic scroll saw class. Join us and learn how to bring your scroll saw projects to life with segmentation!
Sharpening is an essential skill for all woodworkers, gardeners, metalworkers, chefs, and homeowners alike. Join Woodcraft as we spend an evening getting hands on to learn the basics of sharpening all manner of tools, including bench chisels, carving chisels, plane blades, card scrapers, drill bits, router bits, knives, scissors, shovels, and more! Class participants are encouraged to bring their own tools to work on and discuss sharpening strategies with the rest of the class. Included in the class tuition is the book "Sharpening: A Woodworker’s Guide" by Randall A. Maxey so you can continue your sharpening journey at home.
Join Arden as she takes you through a woodworking 101 class designed specifically for anyone who is new to woodworking or feels uncomfortable in a traditional woodshop. You'll be making a functional mallet by using and getting acquainted with all the major tools- bandsaw, router table, table saw, jointer, planer, sander, and miter saw. While you'll make a functional tool to add to or start your workshop, the emphasis of the day is safety and getting comfortable using large power tools.
In this hands-on workshop, you'll learn the foundational skills of box making by starting with a scrollsaw project and progressing to a bandsaw box. We’ll begin by crafting a smaller box with a drawer using the scrollsaw. You will learn how to: - Shape the basic outline of the box - Cut off the back of the box - Cut out the drawer - Cut off the front and back of the drawer - Hollow out the drawer - Assemble the entire box with the drawer Once you’ve mastered these techniques on the scrollsaw, you’ll apply the same process on the bandsaw to create a larger box. By the end of the class, you’ll have two completed projects and a solid understanding of both scrollsaw and bandsaw box-making techniques.