Woodcraft of Atlanta

503_Acrilic_Casting.jpg

$85.00

Intermediate/Advanced

Acrylic Pen Blank Casting Workshop

with David Bosch

Monday, May 12, 6 PM - 9 PM

Unlock the art of acrylic casting in this hands-on workshop! Students will learn to design and cast unique acrylic pen blanks, experimenting with various colors and techniques to achieve stunning effects. Whether you're new to casting or looking to refine your skills, our experienced instructor will guide you through the entire process—from mixing and pouring resin to curing and finishing high-quality blanks. All materials are included, but students are welcome to bring their own molds or pigments to personalize their creations further.

503_Coasters.jpg

$120.00

All Levels

Resin Coaster

with Tricia Haberman

Part 1: Tuesday, May 13, 6 PM - 9 PM

Part 2: Wednesday, May 14, 6 PM - 9 PM

Part 3: Tuesday, May 20, 6 PM - 9 PM

In this hands-on workshop, participants will craft a set of six beautiful epoxy resin coasters featuring dried flowers, with the option to personalize their creations using a wide range of colors. The finished coasters will be completed with a protective cork backing and elegantly packaged in a transparent white organza gift bag. Throughout the session, participants will gain a solid understanding of different types of epoxy resin and how to choose the right one for their project. They will also learn how to use silicone molds effectively, mix epoxy resin and hardener accurately for optimal consistency, and master techniques to minimize air bubbles during the curing process to achieve a flawless, professional finish.

503_Router.jpg

$155.00

Intermediate

Router Basics & Techniques

with Terry Nielsen

Friday, May 16, 9 AM - 5 PM

Learn how to set-up the handheld router and router table to make different types of cuts that are used in making furniture, cabinets, boxes and other woodworking. These techniques will be used to demonstrate several project examples. This class is valuable for everyone from the beginner to the more experienced woodworker wanting to brush up on his or her router and router table skills

503_Santa.jpg

$125.00

All Levels

Wood Carving

with Steve Wilensky

Saturday, May 17, 9 AM - 4 PM

In Out of My Mind Carving with Steve Wilensky, participants will learn from a master carver with a unique talent for revealing whimsical characters hidden within any piece of wood. Steve’s approach is all about creativity and intuition—guiding each student to carve out the figure that “wants to come out” of the wood. The day begins with an overview of essential skills, including how to handle, manipulate, and keep carving tools sharp while prioritizing safety. With Steve’s expert guidance, students will enjoy the peaceful rhythm of carving, allowing their imaginations to shape delightful, one-of-a-kind characters. This relaxing class is perfect for anyone eager to explore the art of whimsical woodcarving in an inspiring, hands-on environment.

503_Box.jpg

$165.00

Intermediate

Turning a Liddel Box

with Charlie Levan

Saturday, May 17, 9 AM - 5 PM

Join us for a fun and hands-on woodturning class where we’ll create a beautiful, lidded box, approximately 3.5" wide by 4.5" tall—perfect for holding jewelry or other small treasures! Along the way, you'll develop valuable skills using traditional high-speed steel tools, including spindle gouges and negative rake scrapers. We'll cover everything from shaping the box to fitting the lid, all while focusing on safe and effective woodturning techniques. This class is great for those with some basic lathe experience who are looking to build confidence and take their skills to the next level!

503_Pen_Turning_II.jpg

$150.00

Intermediate

Pen Turning II

with David Bosch

Sunday, May 18, 9 AM - 5 PM

Ready to take your pen turning skills to the next level? This class is designed for those already familiar with pen turning basics but eager to refine their expertise. Craft a more complex pen from wooden or acrylic blanks. Students will leave with a pen they can be proud of and use for years to come. All materials are included.

503_Advance_Pen_Turning.jpg

$75.00

Intermediate/Advanced

One-of-a-Kind Pen Making Class

with David Bosch

Monday, May 19, 6 PM - 9 PM

Take your pen-making skills to the next level! In this immersive class, students will craft a one-of-a-kind rollerball or fountain pen using their own pen blanks or those provided. With expert guidance, participants will learn advanced turning techniques, precision shaping, and high-quality finishing to create a professional-grade pen that will last a lifetime. Whether using custom-cast blanks from the Acrylic Casting Workshop or bringing their own, students will leave with a truly unique writing instrument.

503_Bandsaw_Boxes2.jpg

$165.00

Beginner/Intermediate

The Bandsaw Class

with Milton Miller

Friday, May 23, 9 AM - 5 PM

Our instructor will demonstrate the fundamentals of tuning a bandsaw for optimal performance and how to select a blade to use for different cuts. You will learn how to design, cut, sand and assemble a unique box on the bandsaw. Take home a project that will amaze your friends and family.

503_WWII.jpg

$380.00

Intermediate

Introduction to Woodworking II

with Terry Nielsen

Part 1: Saturday, May 24, 9 AM - 5 PM

Part 2: Sunday, May 25, 9 AM - 5 PM

In this class, the Student will expand upon what they have already learned by using the bandsaw and router, in addition to the tools learned in the previous class, to build a Shaker Side Table. The student will learn how to make the mortise and tenon joint using the Festool Domino tool, a simple Dovetail Drawer, as well as how to add a taper to a leg.

503_Shaker_Oval_Boxes1.png

$410.00

Intermediate/Advanced

Shaker Oval Box

with John Jones

Part 1: Saturday, May 31, 9 AM - 5 PM

Part 2: Sunday, June 1, 9 AM - 5 PM

Master the art of crafting iconic Shaker Oval Boxes in this immersive 2-day workshop. This class offers an opportunity to refine your skills while creating a set of five beautifully crafted boxes, each ready for staining or finishing. What you’ll learn: Traditional techniques for shaping and bending wood. Carving swallow tails. Proper assembly and construction methods for Shaker-style joinery. Tips for achieving precision and consistency across multiple pieces. Students will be using Maple wood for their project. By the end of the class, you’ll have a complete nested set of 5 Shaker Oval Boxes, showcasing your craftsmanship and attention to detail.

503_Epoxy_Coating2.png

$185.00

Beginner

Intro to EPOXY - Coating

with Milton Miller

Part 1: Monday, June 2, 6 PM - 9 PM

Part 2: Tuesday, June 3, 6 PM - 9 PM

From Countertop to Live Edge Wood Surface and Floors. Epoxy Pouring required preparation, precision, and a good amount of experience and creativity. In this course our instructor will guide you in all steps to create a stunning, glossy finish that highlights the natural beauty of the wood.

503_Small_Bowl.jpg

$75.00

Beginner

Turning Night

with David Bosch

Wednesday, June 4, 6 PM - 9 PM

In this class, you'll craft a beautiful small bowl approximately 4 inches in diameter—perfect for holding condiments, spices, or other kitchen essentials. This beginner-friendly project offers endless creative possibilities and allows you to add a unique, handcrafted touch to your kitchen décor.

503_WW1.jpg

$380.00

Beginner

Introduction to Woodworking I

with Terry Nielsen

Part 1: Saturday, June 7, 9 AM - 5 PM

Part 2: Sunday, June 8, 9 AM - 5 PM

With Intro to Woodworking I, the student will learn the basic aspects, safety measures and uses of power tools and furniture assembly procedures. You will complete a small wall hanging cabinet. You will gain hands-on experience with basic joinery' how to "4 square" a board as well as hardware installation by the end of the last session.

503_FD1.png

$80.00

Beginner

Father's Day Session 1

with Woodcraft Instructor

Monday, June 9, 6 PM - 9 PM

Making puzzles in the scroll saw: Celebrate Father’s Day with a hands-on scroll saw workshop where participants will craft a wooden puzzle of their preference. Learn how to safely and confidently operate a scroll saw while exploring creative techniques to bring your puzzle ideas to life. This class offers a world of creative possibilities and enjoyable skill-building.

503_FD2.png

$80.00

Beginner

Father's Day Session 2

with Woodcraft Instructor

Tuesday, June 10, 6 PM - 9 PM

Personalized Turned Pen: In this project, children will turn wooden pen blanks on a lathe to create unique writing instruments. They'll have the opportunity to personalize the pens with Dad's initials, favorite colors, or special designs, making each pen a one-of-a-kind gift. Laser Engraving available. Materials Included with the Tuition.

503_FD3.png

$80.00

Beginner

Father's Day Session 3

with Woodcraft Instructor

Wednesday, June 11, 6 PM - 9 PM

Personalized Grill Cutting Board: Participants will create a customized cutting board designed specifically for grilling enthusiasts. They'll learn how to personalize the board with Dad's name or a special message and incorporate features such as juice grooves and handles for easy handling. Laser Engraving available. Materials Included with the Tuition.

503_FD4.png

$80.00

Beginner

Father's Day Session 4

with Woodcraft Instructor

Thursday, June 12, 6 PM - 9 PM

Beer Caddy: Participants will construct a wooden beer caddy with compartments for holding Dad's favorite brews. They'll learn how to measure, cut, assemble, and personalize the caddy, adding features such as a bottle opener or custom engraving to make it extra special. Laser Engraving available. Materials Included with the Tuition.

503_FD5.png

$80.00

Beginner

Father's Day Session 5

with Woodcraft Instructor

Friday, June 13, 6 PM - 9 PM

Wooden Grill Flipper and Scraper: In this hands-on woodworking class, participants will craft essential grilling tools—a Kitchen Flipper and a Wooden Grill Scraper, perfect for any barbecue enthusiast. Using hardwood blanks, they’ll learn to turn, shape, and sand the wood into ergonomic, functional designs that enhance grilling ease and safety. Perfect father and child experience. Laser Engraving available. Materials Included with the Tuition.

503_WW1-ed.jpg

$380.00

Beginner

Introduction to Woodworking I

with Ed Proctor

Part 1: Saturday, June 14, 9 AM - 5 PM

Part 2: Sunday, June 15, 9 AM - 5 PM

With Intro to Woodworking I, the student will learn the basic aspects, safety measures and uses of power tools and furniture assembly procedures. You will complete a small wall hanging cabinet. You will gain hands-on experience with basic joinery' how to "4 square" a board as well as hardware installation by the end of the last session.

503_Celtic_Knot_Vintage.jpg

$150.00

Beginner

Relief Carving - A Celtic Knot

with Robert Stebbins

Tuesday, June 17, 6 PM - 9 PM

Students will carve a Celtic knot, beautiful by itself, but also a useful decorative application to other wood projects. Carvings can be applied to cabinet fronts, boxes, hang simply on the wall, or be incorporated into furniture. It is a wonderful beginner's project for relief carving, but the steps we follow will be useful in learning more advanced carving techniques in the future. Students will be provided with a choice of beginner's patterns and basswood blanks. Everyone will learn proper use of carving tools, safety, tool maintenance, sharpening and stropping techniques.

503_Sharpening.jpg

$85.00

Beginner

Sharpening Chisels and Plane Irons

with Robert Stebbins

Thursday, June 19, 6 PM - 9 PM

Sharpening is a critical aspect of woodworking. In this class, students will be presented with an overview, a detailed process and a demonstration on how to sharpen plane irons and chisels. Sharpening supplies, tools, and helpful jigs will be discussed as well as several alternate sharpening approaches/methods. Students will practice sharpening their personal plane irons and chisels with help from the instructor.

503_Table_Saw.jpg

$165.00

Intermediate

Table Saw Basics & Techniques

with Terry Nielsen

Friday, June 20, 9 AM - 5 PM

Terry will teach you how to use a table saw safely and accurately. Each student will have the opportunity to practice many table saw operations including cross cutting, ripping and taper cuts. The student will also make a basic crosscut sled. Terry will go over how to install the sliders so their sled will make accurate crosscuts. He will discuss the advantages/disadvantages of the various types of sliders available so the student can decide which type suits their needs and make a purchase accordingly.

503_Cutting.png

$165.00

Intermediate

Cutting Boards

with Milton Miller

Saturday, June 21, 9 AM - 5 PM

The instructor will guide the student through the choosing of the right hardwood all the way to what finish to put on your completed cutting board. You will be using the Planer, Drum Sander, Bandsaw, Disc & Spindle Sander & Hand Router by end of day. The instructor will teach you how to properly glue up a segmented cutting board, how to clamp w/ even pressure & choose the best finish.

503_Carving_2.jpg

$125.00

All Levels

Wood Carving

with Steve Wilensky

Saturday, June 21, 9 AM - 5 PM

In Out of My Mind Carving with Steve Wilensky, participants will learn from a master carver with a unique talent for revealing whimsical characters hidden within any piece of wood. Steve’s approach is all about creativity and intuition—guiding each student to carve out the figure that “wants to come out” of the wood. The day begins with an overview of essential skills, including how to handle, manipulate, and keep carving tools sharp while prioritizing safety. With Steve’s expert guidance, students will enjoy the peaceful rhythm of carving, allowing their imaginations to shape delightful, one-of-a-kind characters. This relaxing class is perfect for anyone eager to explore the art of whimsical woodcarving in an inspiring, hands-on environment.

503_Scroll_Saw.jpg

$165.00

Beginner

Scroll Saw Basics

with Hans Meier

Sunday, June 22, 9 AM - 5 PM

Scroll-sawing the most popular, rewarding and safest of all woodworking activities. The tool is easy for beginning woodworkers of all ages to create a wide variety of useful and fun items. This class will show you how to set-up and use the saw, select the proper blade for different projects, find or create and use patterns, and to sand and finish your creation. You will practice basic in- and outside cuts to make sticks figures, puzzles, three-dimensional objects, and much more.

$350.00

Beginner

Summer Camp 10 to 14

with Woodcraft Instructor

Part 1: Monday, June 23, 1 PM - 4 PM

Part 2: Tuesday, June 24, 1 PM - 4 PM

Part 3: Wednesday, June 25, 1 PM - 4 PM

Part 4: Thursday, June 26, 1 PM - 4 PM

Part 5: Friday, June 27, 1 PM - 5 PM

This is a hand-on, 5 half day Class, for young teenagers' eager to experience working in a real woodshop. We'll provide a safe and creative environment. Different project every day. Suitable from ages 10- to 14-year-old. The activities will run from 1PM to 4PM. Early drop-off or late pick-up is NOT available. Call the store if you have any question. Phone (770) 587-3372

503_Chair.jpg

$350.00

Intermediate

Build An Adirondack Chair

with Terry Nielsen

Part 1: Saturday, June 28, 9 AM - 5 PM

Part 2: Sunday, June 29, 9 AM - 5 PM

Few things are as uniquely American as an Adirondack chair. Build this timeless classic in our 2-day Adirondack chair class. You will learn how to use templates for consistent and repeatable component piece completion. You will then assemble those components into your own backyard masterpiece. Once you have completed this class you will be able to use these techniques to build additional Adirondack chairs for yourself, friends and relatives. Tools used during this class will include the Table Saw, Band Saw, Miter Saw, Spindle and Disk Sander, Router and Drill Driver.

503_Hand_Tools.jpg

$360.00

Beginner

Hand Tools Woodworking Fundamentals

with Robert Stebbins

Part 1: Tuesday, July 1, 6 PM - 9 PM

Part 2: Wednesday, July 2, 6 AM - 9 PM

Part 3: Thursday, July 3, 6 PM - 9 PM

Part 4: Wednesday, July 9, 6 PM - 9 PM

Part 5: Thursday, July 10, 6 PM - 9 PM

Part 6: Thursday, July 17, 6 PM - 9 PM

This comprehensive hand tools woodworking class is designed for beginners and woodworking enthusiasts who want to develop proficiency in using hand tools and learn fundamental joinery techniques. Participants will start by mastering essential hand tools, progressing from understanding their functions to honing their skills. In the latter part of the course, students will apply their newfound knowledge to craft a box, practicing various joinery techniques along the way. This course will run for 3 weeks, meeting twice a week in 3 hours session.

503_WW1.jpg

$380.00

Beginner

Introduction to Woodworking I

with Terry Nielsen

Part 1: Saturday, July 5, 9 AM - 5 PM

Part 2: Sunday, July 6, 9 AM - 5 PM

With Intro to Woodworking I, the student will learn the basic aspects, safety measures and uses of power tools and furniture assembly procedures. You will complete a small wall hanging cabinet. You will gain hands-on experience with basic joinery' how to "4 square" a board as well as hardware installation by the end of the last session.

503_End_Grain_CB.jpg

$190.00

All Levels

End Grain Cutting Board

with Milton Miller

Part 1: Monday, July 7, 5 PM - 9 PM

Part 2: Tuesday, July 8, 5 PM - 9 PM

The instructor will guide students through the entire process of creating an eye-catching end grain cutting board, from selecting the right hardwood to applying the perfect finish. This stunning kitchen accessory may look challenging, but it's amazingly easy to make thanks to a simple trick for creating the lively geometric pattern. Over the course of these two-day sessions, participants will learn to use various power tools and master gluing and clamping techniques, ensuring they complete their own unique and beautifully finished pieces.

503_Router.jpg

$155.00

Intermediate

Router Basics & Techniques

with Terry Nielsen

Friday, July 11, 9 AM - 5 PM

Learn how to set-up the handheld router and router table to make different types of cuts that are used in making furniture, cabinets, boxes and other woodworking. These techniques will be used to demonstrate several project examples. This class is valuable for everyone from the beginner to the more experienced woodworker wanting to brush up on his or her router and router table skills

503_WW1-ed.jpg

$380.00

Beginner

Introduction to Woodworking I

with Ed Proctor

Part 1: Saturday, July 12, 9 AM - 5 PM

Part 2: Sunday, July 13, 9 AM - 5 PM

With Intro to Woodworking I, the student will learn the basic aspects, safety measures and uses of power tools and furniture assembly procedures. You will complete a small wall hanging cabinet. You will gain hands-on experience with basic joinery' how to "4 square" a board as well as hardware installation by the end of the last session.

503_Small_Bowl.jpg

$75.00

Beginner

Turning Night

with David Bosch

Tuesday, July 15, 6 AM - 9 PM

In this class, you'll craft a beautiful small bowl approximately 4 inches in diameter—perfect for holding condiments, spices, or other kitchen essentials. This beginner-friendly project offers endless creative possibilities and allows you to add a unique, handcrafted touch to your kitchen décor.

503_Bandsaw_Towers_1.jpg

$170.00

Intermediate

Bandsaw Tower

with Milton Miller

Friday, July 18, 9 AM - 5 PM

Expand your bandsaw skills by creating a stunning multi-drawer tower in this hands-on class designed for intermediate woodworkers. Building on your experience from previous bandsaw or bandsaw box courses, this project will challenge your precision, design, and creativity.

503_Intro_Spindles.png

$120.00

Beginner

Introduction to the Wood Lathe

with David Bosch

Saturday, July 19, 9 AM - 5 PM

Have you ever wanted to try turning on a wood lathe? Join us in this introductory class and learn about the lathe and associated tools. Not only will you learn proper processes for spindle turning on the lathe safely and effectively, but you’ll also go home with an attractive candlestick holder. Use the basic skills from this class to move on to other turning classes like pen and bowl turning. All materials are included.

503_Carving_2.jpg

$125.00

All Levels

Wood Carving

with Steve Wilensky

Saturday, July 19, 9 AM - 5 PM

In Out of My Mind Carving with Steve Wilensky, participants will learn from a master carver with a unique talent for revealing whimsical characters hidden within any piece of wood. Steve’s approach is all about creativity and intuition—guiding each student to carve out the figure that “wants to come out” of the wood. The day begins with an overview of essential skills, including how to handle, manipulate, and keep carving tools sharp while prioritizing safety. With Steve’s expert guidance, students will enjoy the peaceful rhythm of carving, allowing their imaginations to shape delightful, one-of-a-kind characters. This relaxing class is perfect for anyone eager to explore the art of whimsical woodcarving in an inspiring, hands-on environment.

503_Bowls.png

$150.00

Beginner

Turning Wooden Bowls

with David Bosch

Sunday, July 20, 9 AM - 5 PM

In this class you will learn the processes for safely turning a wooden bowl on the lathe. You will complete an attractive bowl that’s about six inches in diameter and two inches deep. It is HIGHLY recommended that you take the Introduction to the Wood Lathe class prior to enrolling in this class as we will be building on the skills learned in the intro class. All materials are included.

503_Summer_Camp_15+.png

$380.00

Beginner

Summer Camp 15+

with Woodcraft Instructor

Part 1: Monday, July 21, 1 PM - 4 PM

Part 2: Tuesday, July 22, 1 PM - 4 PM

Part 3: Wednesday, July 23, 1 PM - 4 PM

Part 4: Thursday, July 24, 1 PM - 4 PM

Part 5: Friday, July 25, 1 PM - 5 PM

This is a hand-on, 5 half day Class, for young teenagers' eager to experience working in a real woodshop. We'll provide a safe and creative environment. We will focus in a single project during the week, were we'll cover all essential tools and techniques to build a cabinet from scratch. Suitable from ages 15+ year-old. The activities will run from 1PM to 4PM. Early drop-off or late pick-up is NOT available. Call the store if you have any question. Phone (770) 587-3372

503_Cabinet_Making.jpg

$420.00

Intermediate

Introduction to Cabinet Making

with Terry Nielsen

Part 1: Saturday, July 26, 9 AM - 5 PM

Part 2: Sunday, July 27, 9 AM - 5 PM

In this hands-on class, each student will complete a 15" face frame style base cabinet with drawer and a Shaker-Style door. Cabinet styles and design considerations will be discussed that can be adapted for several different applications including kitchen cabinets, entertainment centers, and bookcases. Construction of the cabinet carcass, face frame and drawer will employ the Kreg Joinery system and construction of the raised panel door will utilize the traditional cope and stick method. Additional joinery techniques for the carcass, face frame, drawer and door will be discussed. You will learn the safe and proper use of the table saw, compound miter saw, router table and finishing sander as you complete the project.

503_Kumiko_Panel.jpg

$165.00

Beginner/Intermediate

Intro to Kumiko

with Deana Spencer

Part 1: Tuesday, July 29, 6 PM - 9 PM

Part 2: Wednesday, July 30, 6 PM - 9 PM

Kumiko is a quiet and thoughtful technique that requires patience and precision. The ancient Japanese woodworking technique consists of making patterns from small pieces of interlocking wood. In this course, your instructor would walk you through the steps needed to create delicate pieces of art with wood. Discover how to seamlessly blend art and craftsmanship by mastering the use of geometry, patterns, and clean lines. Take your woodworking skill to the next level. By the end of the course every student will have created a small panel with a Kumiko pattern.

503_WW1.jpg

$380.00

Beginner

Introduction to Woodworking I

with Terry Nielsen

Part 1: Saturday, August 2, 9 AM - 5 PM

Part 2: Sunday, August 3, 9 AM - 5 PM

With Intro to Woodworking I, the student will learn the basic aspects, safety measures and uses of power tools and furniture assembly procedures. You will complete a small wall hanging cabinet. You will gain hands-on experience with basic joinery' how to "4 square" a board as well as hardware installation by the end of the last session.

503_River_Board.jpg

$180.00

Intermediate

Epoxy River Board

with Milton Miller

Part 1: Monday, August 4, 6 PM - 9 PM

Part 2: Tuesday, August 5, 6 PM - 9 PM

Part 3: Monday, August 11, 6 PM - 9 PM

Take your epoxy skills to the next level in this advanced class, where you'll craft a stunning epoxy-accented cutting board. Designed for woodworkers who have completed an epoxy pouring class, this workshop combines woodworking techniques with creative epoxy designs. What you’ll learn: Selecting and preparing wood for epoxy. Advanced epoxy pouring and design techniques. Shaping, sanding, and finishing for a functional and polished cutting board. By the end of this class, you'll have a completed, food-safe cutting board featuring a unique epoxy design, ready to impress in your kitchen or as a gift.

503_Serving_Pot.jpg

$75.00

Beginner

Turning Night

with David Bosch

Wednesday, August 6, 6 PM - 9 PM

In this class, you'll craft a beautiful small bowl approximately 4 inches in diameter—perfect for holding condiments, spices, or other kitchen essentials. This beginner-friendly project offers endless creative possibilities and allows you to add a unique, handcrafted touch to your kitchen décor.

503_Restoration.jpg

$30.00

All Levels

Funiture Restoration Seminar

with Robert Stebbins

Thursday, August 7, 6 PM - 9 PM

Embark on a captivating journey through furniture history in our comprehensive seminar on restoration. Discover the secrets of restoration, where craftsmanship meets history. Dive into practical techniques that honor the authenticity of each piece while reviving its glory. The instructor will shera invaluable insights into preserving the essence of bygone eras. Join us for an immersive experience, where the past comes to life through the restoration of these timeless treasures.

503_Table_Saw.jpg

$165.00

Intermediate

Table Saw Basics & Techniques

with Terry Nielsen

Friday, August 8, 9 AM - 5 PM

Terry will teach you how to use a table saw safely and accurately. Each student will have the opportunity to practice many table saw operations including cross cutting, ripping and taper cuts. The student will also make a basic crosscut sled. Terry will go over how to install the sliders so their sled will make accurate crosscuts. He will discuss the advantages/disadvantages of the various types of sliders available so the student can decide which type suits their needs and make a purchase accordingly.

503_WW1-ed.jpg

$380.00

Beginner

Introduction to Woodworking I

with Ed Proctor

Part 1: Saturday, August 9, 9 AM - 5 PM

Part 2: Sunday, August 10, 9 AM - 5 PM

With Intro to Woodworking I, the student will learn the basic aspects, safety measures and uses of power tools and furniture assembly procedures. You will complete a small wall hanging cabinet. You will gain hands-on experience with basic joinery' how to "4 square" a board as well as hardware installation by the end of the last session.

$30.00

All Levels

SketchUp 101

with Ricardo Hernandez

Tuesday, August 12, 6 PM - 9 PM

Getting Started with SketchUp You'll learn the fundamentals of SketchUp, including navigating the workspace, using essential drawing and editing tools, and creating basic 3D shapes. By the end of the session, you’ll be able to model simple woodworking components with accuracy. The day will end with an exercise to take home to discuss in the next session

503_Coasters.jpg

$120.00

All Levels

Resin Coaster

with Tricia Haberman

Part 1: Wednesday, August 13, 6 PM - 9 PM

Part 2: Thursday, August 14, 6 PM - 9 PM

Part 3: Thursday, August 21, 6 PM - 9 PM

In this hands-on workshop, participants will craft a set of six beautiful epoxy resin coasters featuring dried flowers, with the option to personalize their creations using a wide range of colors. The finished coasters will be completed with a protective cork backing and elegantly packaged in a transparent white organza gift bag. Throughout the session, participants will gain a solid understanding of different types of epoxy resin and how to choose the right one for their project. They will also learn how to use silicone molds effectively, mix epoxy resin and hardener accurately for optimal consistency, and master techniques to minimize air bubbles during the curing process to achieve a flawless, professional finish.

503_Feather4.jpg

$150.00

Beginner

Intro to Power Carving

with Christine Smith

Friday, August 15, 9 AM - 5 PM

In this hands-on power-carving class, participants will start with a precut wood blank shaped like a Great Horned Owl tail feather. You'll learn to use a power carver to sculpt the feather’s natural 3D curve and taper, then refine it by adding delicate barbs along the edges. With the help of wood-burning tools, you’ll enhance fine details like the rachis and the distinctive markings that give this feather its signature look. Guided step by step, you’ll apply transparent color washes in soft layers—blending muted browns, creams, and grays to create realistic depth and texture. By the end of the class, you’ll have completed a lifelike, three-dimensional feather that beautifully captures the essence of the Great Horned Owl’s plumage.

503_Hollol_Vessel.jpg

$165.00

Intermediate

Turning a Hollow Forms

with David Bosch

Saturday, August 16, 9 AM - 5 PM

In this class, you will learn how to turn a two-part hollow form or vessel, using standard bowl turning gouges for hollowing. You’ll complete a beautiful hollow form of your own design, and your instructor will also share some fun and creative turning techniques along the way. These vessels are truly stunning—get ready to create something amazing! It is highly recommended that you have taken Intro to Turning Bowls or have equivalent experience before enrolling in this class.

$165.00

Intermediate

Turning Holliday Ornaments

with David Bosch

Sunday, August 17, 9 AM - 5 PM

Explore the artistry of woodturning in our holiday ornament-making class! Join us for a hands-on experience where you'll learn to transform raw wood into exquisite, festive treasures. Whether you're a beginner or an experienced woodturner, you'll discover how to design and craft stunning holiday ornaments, each uniquely finished to adorn your tree or create heartfelt gifts for loved ones. This class offers a delightful blend of creativity and craftsmanship, making it the perfect way to add a touch of homemade charm to your holiday celebrations.

$30.00

All Levels

SketchUp 102

with Ricardo Hernandez

Tuesday, August 19, 6 PM - 9 PM

Building Complex Models and Components In the second session, you’ll dive into working with groups and components, organizing your model, and applying precision tools like guidelines and the tape measure. You’ll learn how to create joinery, exploded views, and how to plan for materials and assemblies. The day will end with an exercise to take home to discuss in the next session

503_Finish.jpg

$160.00

Beginner

Finishing Workshop

with Milton Miller

Friday, August 22, 9 AM - 5 PM

Love to build, but hate to finish projects? With this Introduction course, the focus will be to give the student the experience of using different Penetrating Finishes & Topcoats. The teacher will guide the student in various applications penetrating finishes in the morning. Then in the afternoon the teacher will go over the application of various topcoats. The student will use various application methods that include brushes, rags & paper towels.
A method/sequence will be given so the student will be able to achieve predictable results.
The student is strongly encouraged to wear "old" clothes that they are not afraid of getting messy. Gloves will be provided for the student to use.

503_WWII.jpg

$380.00

Intermediate

Introduction to Woodworking II

with Terry Nielsen

Part 1: Saturday, August 23, 9 AM - 5 PM

Part 2: Sunday, August 24, 9 AM - 5 PM

In this class, the Student will expand upon what they have already learned by using the bandsaw and router, in addition to the tools learned in the previous class, to build a Shaker Side Table. The student will learn how to make the mortise and tenon joint using the Festool Domino tool, a simple Dovetail Drawer, as well as how to add a taper to a leg.

503_Scroll_Saw.jpg

$165.00

Beginner

Scroll Saw Basics

with Hans Meier

Part 1: Monday, August 25, 6 PM - 9 PM

Part 2: Tuesday, August 26, 6 PM - 9 PM

Scroll-sawing the most popular, rewarding and safest of all woodworking activities. The tool is easy for beginning woodworkers of all ages to create a wide variety of useful and fun items. This class will show you how to set-up and use the saw, select the proper blade for different projects, find or create and use patterns, and to sand and finish your creation. You will practice basic in- and outside cuts to make sticks figures, puzzles, three-dimensional objects, and much more.

$30.00

All Levels

SketchUp 103

with Ricardo Hernandez

Wednesday, August 27, 6 PM - 9 PM

Designing with SketchUp & Intro to Layout The final class focuses on using SketchUp as a true design tool. You’ll explore how to iterate on your ideas, create presentation views, and prepare your model for documentation. You’ll also get a brief introduction to SketchUp Layout, and how it connects to your models for creating plans, elevations, and working drawings

503_Drawers.jpg

$165.00

Intermediate

Drawer Construction

with Ed Proctor

Friday, August 29, 9 AM - 5 PM

Build on your foundational skills with this focused class on drawer construction. Learn precise measuring, material selection, and joinery techniques to create strong, functional drawers tailored to different styles, uses, and the tools you have at home. We’ll cover multiple construction methods, from traditional to modern, with an emphasis on accuracy and durability. Ideal for those continuing from Introduction to Cabinet Making, this class will equip you with the confidence to craft professional-quality drawers for any project.