WoodRiver - Workshop Glue Injectors, 2-Pack
Accordion style plastic body easily collapses with thumb pressure so glue placement is controlled. Stainless steel needle tip will not bend or close up under pressure. For detail work, forcing glue...
- Designed for pin point gluing accuracy
- Stainless steel needle tip will not bend or close up under pressure.
- For detail work, forcing glue into furniture joints and cracks, or making repair
- Capacity 1 ounce and includes storage cap.
Inside diameter of needle is so small that you can hardly force glue through it. When glue dries in the needle (and it will) there is no way to get it open. Competitor's units have larger diameter needle which still gives you good control over quantity and can be cleaned out with a straightened paperclip.
Bad for woodworking glues
These used to have a larger tip - aprox. 14 or 16 gauge. Now they have a Luer Lock adaptor and a tiny tip - aprox. 18 or 20. It runs a tiny bead of glue and clogs up immediatly. Useless for woodwoking glues.
New Glue Injectors
The old glue injectors with the orange tops were terrific. These new ones clog up extremely fast. So fast that I won't buy them anymore. Almost worthless with normal wood glue.
I would buy this product again
Like it where small amounts of glue is needed
Great Glue Accessory
These are the greatest glueing accessory for my work on miniatures and dollhouses. The only con is they will eventually clog due to the very small aperature. But for the price, I keep replacing them every 6 months or so. Perfect to put a small bead on any project.
great for small work
easier to alppy
A good product for the price
For the price it really does the job. The only improvement would be a cap for easier filling.
Easy to use , super for detail work .
Very useful! saved my life on a job repairing a piece with peeling veneer, can stick it right down into the gap to inject fresh glue. The only downside? refilling it through the tiny hole is difficult, it should come with a baby funnel or something.