View a Larger Image of 220-Volt Dust Collector Remote Control Switch
WoodRiver RC02 220V
Item 145476

220-Volt Dust Collector Remote Control Switch

$79.98 Clearance

$89.99

In Stock

It never fails. Every time you need to start your dust collector you''re on the other side of the shop. Our remote control will give you the convenience of being able to turn on your dust collector...

You May Also Like

Details

It never fails. Every time you need to start your dust collector you''re on the other side of the shop. Our remote control will give you the convenience of being able to turn on your dust collector from as far away as 50 feet. It even works through walls! Simply press the "On"/"Off" button on the key fob and your dust collector responds accordingly. Installation is easy. Plug the remote base unit into a power source, plug your dust collector into the base unit and set the collector''s switch to "On." The base unit includes a 6-foot cord and mounting tabs so it can be mounted to the wall. The key fob includes batteries and a quick-latch key chain to keep it handy. The 220V unit will operate dust collectors up to 3HP.



  • Operate dust collectors up to 3HP
  • Operates dust collector from 50 feet away
  • 6-foot cord

Reviews

4.73 out of 5 stars
26 Reviews
  1. 5.0 out of 5 stars
    by on

    Almost too easy!

    I once installed those metal blast gates with the hard wired low voltage switches that when activated by sliding the blast gate open, would activate another switch that would then turn on my dust collector. At first it worked fine, but as time passed it began to fail, and work inconsistently. It was frustrating! This product has taken all the frustration out of turning on my dust collector remotely. I carry the key bob in my pocket, and simply push the button when I open the blast gate. It always works. What a great idea! It uses the same technology that is used in your garage door opener. I love it. My shop is 36x36 in size, and it works from everywhere within my shop with no issues at all. Thanks!

  2. 5.0 out of 5 stars
    by on

    WoodrRiver 220 volt Remote Switch

    Great product! No instructions included, but pretty simple to hook up. Got tired of always having to go over to the collector to switch it on/off. Using a Grizzly G1029/2HP collector. Excellent!!

  3. 5.0 out of 5 stars
    by on

    Silly not to have this!

    I just received this remote switch and I can not believe that I waited 13 years to pick one of these things up! I don't even want to know how much accumulated time I have wasted by walking over to turn my dust collector on and off. Buy it now!

  4. 4.0 out of 5 stars
    by on

    Works Great

    I have a 20 by 40 shop with this remote installed on the other side of a wall. It works every time, regardless where I am in the shop. The only down side is that the mounts for attaching to the wall are a little hokey. However, a very minor issue.

  5. 4.0 out of 5 stars
    by on

    Excellent Product

    Using the remote to start my dust collecter makes things 100% easier.

  6. 4.0 out of 5 stars
    by on

    Works well

    Great for remotely starting/stopping my dust collection when using my saw, jointer, planar, sander, vacuuming the shop floor, etc. Depending on shop layout, a second remote switch is desirable. Unfortunately, there's no documentation about programming the second switch.

  7. 5.0 out of 5 stars
    by on

    The remote controller has been great.

    Because I am now more likely to turn off the dust collecter when I am not using it I save electricity. The dust collecter is about 30 feet from my heaviest dust and shaving producers so now I will be able to use it instead of thinking it would be easier to go ahead and make a little mess and clean it up later.

  8. 5.0 out of 5 stars
    by on

    Awesome

    I use this to turn on my 3 hp dust collector. It works quite well. I do find that I need to systematically open the right blast gate, close the others, and turn on the dust collector before turning on the machine. I must admit that I do not always get this right. Now I see the merits of wiring the blast gate to the dust collector. The remote control has a clip that I put on my shirt button, so it is quite handy. I cannot now imagine walking to the dust collector each time to turn it on. This is a fine device.

  9. 5.0 out of 5 stars
    by on

    A Real Timesaver

    I have a central vac system hooked to each of the seven major tools in the workshop. This really saves time.

  10. 5.0 out of 5 stars
    by on

    Remote 220 connect - the best

    Setting up the unit was very simple and easy to do.

  11. 5.0 out of 5 stars
    by on

    Works exactly as advertised

    I had some reservations because my dust collection system is on the other side of a wall from my large shop. However, it works every time, no mater where I am in the shop.

  12. 5.0 out of 5 stars
    by on

    Very Good Product

    I like the product [...]

  13. 5.0 out of 5 stars
    by on

    Great accessory, needed in every shop!

    Works great with my 220V dust collector. Only wish it had two remotes.

  14. 5.0 out of 5 stars
    by on

    I am happy to have meet it !

    It is efficient to use it and practice.

  15. 4.0 out of 5 stars
    by on

    It does what it claims and worth it.

    It saves steps from not going to the dust collecter to turn it on.

  16. 5.0 out of 5 stars
    by on

    Good Product

    This is a good remote unit for the dust collection system. I am able to turn it on from anywhere in the shop. Would be even better if it came with two key fobs.

  17. 5.0 out of 5 stars
    by on

    Great Addition to my shop!

    What a great idea! My dust collector is downstairs but my workshop is upstairs. I used to plan a bunch of cuts, go turn the collector on, make the cuts then go turn it off. What a time saver!

  18. 4.0 out of 5 stars
    by on

    Works great and I love the Remote Fob.

    Some of these Q's seem unrelated to the product? But the remote is good. I had an older model that gave up the ghost. This remote is less than half the size...I like it much better!

  19. 4.0 out of 5 stars
    by on

    Remote dust extraction operation

    Appears to be a very good unit, which enabled the dust extraction to be operated remotely. Option could be made available for plugs and sockets to suit target country, but apart from that, a very good unit.

  20. 4.0 out of 5 stars
    by on

    Works fine so far

    I use it on a Grizzly 3HP dust collector

  21. 5.0 out of 5 stars
    by on

    Works well

    Couldn't be simpler to set up and use. Plug it in, power on and start collecting dust. Would have been nice if they would give you 2 remotes right out of the box.

  22. 5.0 out of 5 stars
    by on

    Nice remote works Great

    Easy to use, I use it on a Grizzly 220v 3HP dust collector, my shop is 76 feet long the dust collector is at one end and the remote will work anywhere in the shop.

  23. 5.0 out of 5 stars
    by on

    Very good timesaver

    This is a great product. It alows me to put my dust collection system in a back corner and save space in my workshop.

  24. 5.0 out of 5 stars
    by on

    Dust collector remote

    This is my thrid remote, it seems to be a much better unit than the others. Time will tell on how it preforms. So far I like it!!!!!!!

  25. 5.0 out of 5 stars
    by on

    The remote saves hundreds of steps.

    I use this remote to start/stop my shop dust collecting unit. Saves time and steps.

  26. 5.0 out of 5 stars
    by on

    Just what I needed

    My Jet 1200 dust collector has the on/off switch placed near the floor. This device is perfect. I just clip the remote switch to my work apron and it's a breeze to start and stop the collector now.

Top of Page