You would need two regular bar clamps plus two “F” clamps and a set of clamping cauls to do the work of one ClampZILLA™. It easily applies vertical and horizontal pressure simultaneously by simply turning one screw. Your boards move into proper alignment as the edges come together. No more anxiety-filled gluing sessions worrying about the glue starting to set before you get just the right amount of pressure on each clamp.

ClampZILLA’s works with stock from 5/8" to 4". For jobs thinner than 5/8", add a piece of 3/4" material above and below your stock to get all the benefits of the centered lateral pressure and simultaneous vertical pressure. This method is effective on stock 1/4" or even less.

Rugged and durable, the steel bars and clamping pads are powder-coated, and the clamping mechanism components are machined from zinc-plated hardened steel, except the clamp screw pivot, which is machined from brass.

Like all Woodpeckers products, ClampZILLA™ is proudly machined and carefully inspected in the Strongsville, OH facility, just south of Cleveland.

Features:

What’s Included: