Silicone In Tube Pen Dam - 6.5 mm - 8.5 mm Diameter - 2 Piece

Use these WoodRiver® Silicone In Tube Pen Tube Dams to create unique precast pen blanks from epoxy and polyester resins. Decorate your pen tube with your favorite pictures, stamps, cigar labels or just about anything. Insert the appropriate tube pen dam, place into pen blank mold, and cast with clear resin. Depending on the interior diameter of the pen tube, excess resin may need to be trimmed off the ends. After trimming, turn, sand and polish to create a work of art.

Features:

• Pen tube dams are designed to work with both single and quad cavity pen blank molds
• Use to create unique precast pen blanks from epoxy and polyester resins
• Maintenance is important for the reusable molds; we recommend cleaning with denatured alcohol
• Decorate pen tube, place on pen tube dams, and cast in clear resin
• Mold release aids in removing the blank and also extends overall life
• Clean with denatured alcohol as needed
• Pen tube dams are reusable

• Material: silicone
• Project: casting pen blanks
• Compatibility/Use: For kits with an inner diameter greater than 6.5 mm and less than 8.5 mm

• (1) Silicone In Tube Pen Dam - 6.5 mm - 8.5 mm Diameter - 2 Piece

• Maintenance is important for this reusable pent tube dam; we recommend using denatured alcohol to clean it.
• Pen Blank Tube Dams are designed to be used in conjunction pen blank molds (#174211 & 174212, sold separately) to create beautifully decorated pen tubes cast in clear resin.