Sawstop

Industrial Cabinet Saw with 52" Industrial T-Glide Fence System - 5 HP - 1PH - 230V

Name: Industrial Cabinet Saw with 52" Industrial T-Glide Fence System - 5 HP - 1PH - 230V
Brand: Sawstop
SKU: 856293
Price: 5940.0 USD
Availability: InStock

Item #856293 Model ICS51230-TGI252

1 3

Sawstop

Industrial Cabinet Saw with 52" Industrial T-Glide Fence System - 5 HP - 1PH - 230V

Item #856293 Model ICS51230-TGI252

$ 5,940 00

$ 5,940 00 Was ~~$5,940.00~~

The SawStop Industrial Cabinet Saw with 52" Industrial T-Glide Fence System, 5 HP, 1-Phase, 230V delivers the power, capacity and control needed for d. . . View More Details

Product variants

Backordered Online

Frequently Bought Together

Current product. Always included in the bundle total and cannot be deselected.

Sawstop

Industrial Cabinet Saw with 52" Industrial T-Glide Fence System - 5 HP - 1PH - 230V

$5,940.00
Sawstop

Standard Lock Down Insert

+$75.00

Sawstop

Standard Lock Down Insert

Item #843879 Model TSI-SLD

More Info

This insert can be used on all SawStop Table Saws using standard 10" saw blades. Precision machined from a high-quality, ultra strong phenolic core material that is covered on top and bottom with a low-friction, wear-resistant melamine surface. The positioning screws ensure a solid and precise fit in the table. This unit comes with preformed clearance slots for SawStop blade guard and riving knife and has dual metal wear plates for antikickback pawls. The positive locking latch allows for tool-free operation.
Sawstop

Dado Lock Down Insert

+$75.00

Sawstop

Dado Lock Down Insert

Item #843880 Model TSI-DLD

More Info

This insert can be used on all SawStop Table Saws using 8" dado blades. Precision machined from a high-quality, ultra strong phenolic core material that is covered on top and bottom with a low-friction, wear-resistant melamine surface. The positioning screws ensure a solid and precise fit in the table. The positive locking latch allows for tool-free operation.
Sawstop

Over-Arm Dust Collection Assembly

+$349.00
Sawstop

Over-Arm Dust Collection Assembly

Item #846909 Model TSA-ODC

More Info
The Overarm Dust Collection Assembly provides a simple and unobtrusive way to remove dust up and out of the way by connecting directly to SawStop’s dust-collection blade guard. This unit is compatible with ALL SawStop cast iron saws and fits ALL SawStop T-Glide Fence Rail Systems. Purchase a Dust Collection Panel (#842962) to unite above- and below-table dust collection into one 4" port.

Please note: this unit is not compatible with Contractor Saw 30" Aluminum Extrusion Fence - CNS-SFA. This unit also requires the Dust Collection Blade Guard (#846911) if your saw is not already equipped with one.

Features:

Compatible with ALL SawStop cast iron saws

Fits ALL SawStop T-Glide Fence Rail Systems

Requires the Dust Collection Blade Guard if your saw is not already equipped with one

What's Included:

(1) SawStop Over-Arm Dust Collection Assembly
Sawstop

Sliding CrossCut Table

+$1,485.00

Sawstop

Sliding CrossCut Table

Item #861677 Model TSA-SA48

More Info

SawStop has engineered a magnificent Sliding Crosscut Table that incorporates features that woodworkers have only dreamed about until now. The TSA-SA48 Sliding Table is engineered to fit all existing SawStop saws. The sliding table mounting attachment offers pre-drilled mounting holes to match perfectly with all SawStop CNS, PCS and ICS models. The sliding table and fence are made of T-6 Aircraft-grade extruded aluminum, which is beautifully anodized to match your SawStop saw. Special note: This Sliding Crosscut Table will require users to cut the front and rear rails. This is a simple task that any local machine shop will be able to do for a minimal fee.
Designed with multiple bearings, this slider is smooth as silk under the heaviest of loads. SawStop has also engineered this sliding table to be micro-adjustable for smoothness and parallelism to the blade for a perfect cut every time. The sliding table is 47-1/4” deep with a massive 55" travel, giving the user 48" of crosscut capacity. If you are looking to save space, you can flush mount the sliding table with the saw’s front rail, keeping a full 36" crosscut capacity!
At 43" long and with the capability to expand past 58", this fence’s aluminum extrusion is at least 15% larger than typical crosscut sliders on the market. The angle adjustment on the fence is ingenious. SawStop incorporated a single-knob angle adjustment on an oversized miter gauge that will adjust to 60°. You can place the fence anywhere along the length of sliding table and easily adjust its proximity to the blade. The sliding table comes with two large flip-stops, scale and magnified lenses for accurate, repeatable cuts.
Sawstop

Industrial Cabinet Saw Mobile Base

+$475.00
Sawstop

Industrial Cabinet Saw Mobile Base

Item #839714 Model MB-IND-000

More Info
The SawStop Industrial Mobile Base MB-IND-000 is designed specifically for SawStop’s Industrial Cabinet Saws (ICS).

Supports saw and extension table

No additional extension hardware required

1000-lb. capacity

Mobility in any direction

Four 360° high performance casters

No flimsy wheel brakes

Non-marring polyurethane wheels

When disengaged, the saw rests firmly on the ground distributing weight directly to the floor, not the wheels

Three quick pumps of the foot pedal raises the saw

A light press on the release safely lowers the saw

Fully welded solid 1/4" steel construction/black powder coat

High performance full ball bearing casters
Sawstop

Floating Overarm Dust Collection Guard

+$615.00
Sawstop

Floating Overarm Dust Collection Guard

Item #899574 Model TSG-FDC

More Info
A perfect accessory for your SawStop Cast Iron Table Saw. Heavy duty 4"Overarm designed to remove table top dust while providing operator protection in both standard and non-through cuts. The clear blade cover is made to lift easily for quick blade access and the rigid steel overarm swings smoothly away and back into operataing postion.

Only compatible with SawStop saws using the 36" or 52" T-Glide Fence systems.
Shipping / Billing Information
This product ships direct from the manufacturer:

Your order will ship in approximately 5 business days.

This product is considered special order. Your account will be charged when you place your order.

Express or overnight shipping is not available for this product.

Ships by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.

Inspect all freight shipments at time of delivery. If damage or missing pieces, are suspected, please note on driver paperwork.
Return Information
SawStop does not accept returns. If your shipment was damaged, please refuse shipment and call SawStop's customer service department at 503-595-2665.

Warranty Information
SawStop warrants that their saws are free from defects in materials and workmanship for a period of two years from the purchase date, and covers their motors for a period of 5 years. If you have a warranty question, please contact SawStop customer service @ 503-582-9934.
Sawstop

Folding Outfeed Table

+$475.00
Sawstop

Folding Outfeed Table

Item #899575 Model TSA-FOT

More Info
Outfeed Tables are compatible with all SawStop Cast Iron Table Saw Mobile Bases. Engineered from steel for maximum carrying capacity, the outfeed table is sized to match the width of your cast iron table and wings. With strategically placed rollers for smooth operation, the design is made for easy adjustability and maximum glide. With the folding feature, it folds down out of the way for quick, easy stowing.
Shipping / Billing Information
This product ships direct from the manufacturer:

Your order will ship in approximately 5 business days.

This product is considered special order. Your account will be charged when you place your order.

Express or overnight shipping is not available for this product.

Ships by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.

Inspect all freight shipments at time of delivery. If damage or missing pieces, are suspected, please note on driver paperwork.
Return Information
SawStop does not accept returns. If your shipment was damaged, please refuse shipment and call SawStop's customer service department at 503-595-2665.

Warranty Information
SawStop warrants that their saws are free from defects in materials and workmanship for a period of two years from the purchase date, and covers their motors for a period of 5 years. If you have a warranty question, please contact SawStop customer service @ 503-582-9934.
Sawstop

Large Sliding Table

+$1,845.00
Sawstop

Large Sliding Table

Item #899576 Model TSA-SA70

More Info
A perfect accessory for your SawStop Cast Iron Table Saw. The large format Sliding Table ensures easy and repeatable cuts time after time. Cut sheet goods and larger stock easily, with maximum control and sure measurements. Engineered for the demands of the Industrial woodshop, the rigid steel frame and 14 sealed, steel bearings ensure a reliable, smooth glide, while maximum adjustability affords both traditional and Euro configurations for a max crosscut of 70 inches.
Shipping / Billing Information
This product ships direct from the manufacturer:

Your order will ship in approximately 5 business days.

This product is considered special order. Your account will be charged when you place your order.

Express or overnight shipping is not available for this product.

Ships by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.

Inspect all freight shipments at time of delivery. If damage or missing pieces, are suspected, please note on driver paperwork.
Return Information
SawStop does not accept returns. If your shipment was damaged, please refuse shipment and call SawStop's customer service department at 503-595-2665.

Warranty Information
SawStop warrants that their saws are free from defects in materials and workmanship for a period of two years from the purchase date, and covers their motors for a period of 5 years. If you have a warranty question, please contact SawStop customer service @ 503-582-9934.
Sawstop

ICS 30" In-Line Router Table Kit

+$985.00

Sawstop

ICS 30" In-Line Router Table Kit

Item #163586 Model RT-TGI

More Info

Optimize your SawStop® Industrial Cabinet Saw with this In-Line Router Table Assembly. Install this beautiful cast-iron router table between the rails in place of the extension table of your SawStop Industrial Cabinet Saw (sold separately) or, optionally, install to the left of the saw.
This Router Table Kit includes a precision cast-iron table with internal channels, an external power switch for your router, two support legs, and a fence assembly featuring two adjustable faces with shims, a 2.25" dust port, adjustable scales and compatibility with various routing accessories like featherboards, flip stops and more.

Router Lift (RT-LFT) and Down Dust Collection Box (RT-DCB) sold separately.
Note: For saws purchased prior to 2018, retrofit rails will be available and may be required.
Sawstop

Standard 10" Brake Cartridge

+$119.00
Sawstop

Standard 10" Brake Cartridge

Item #181404 Model TSBC-10R3

More Info
This is the standard SawStop brake cartridge for 10" saw blades. This updated SawStop brake cartridge replaces the TSBC-10R2 and is compatible with all models of SawStop except the CB Model Saws that use TSBC-10L.

Features:

Standard SawStop brake cartridge for 10" saw blades

Fits all models of SawStop table saws (except for older CB models)

ICS, PCS & CNS Saws

What's Included:

(1) Standard 10" Brake Cartridge

FAQs

Can this cartridge be reused after it’s activated?

No, the brake cartridge is single-use and must be replaced after activation. Once triggered, it cannot be reset or reused.

How do I know when the brake cartridge needs replacing?

The cartridge should be replaced after any activation or if it shows signs of damage or wear. It’s also good practice to check expiration guidelines if provided by the manufacturer.

How do I install a new brake cartridge safely?

Always disconnect power before installation and follow the manufacturer’s step-by-step instructions. Proper installation ensures the safety system functions correctly when needed.
Sawstop

Dado Brake Cartridge - 8"

+$139.00
Sawstop

Dado Brake Cartridge - 8"

Item #183387 Model TSDC-8R3

More Info
The revolutionary SawStop protection starts here! This SawStop Brake Cartridge for 8" dado blades fits all models of SawStop table saws, except older industrial models. Current SawStop models use cartridges with blue tinted plastic cases and 9-pin connectors. If you have an older model with a clear case and a 15-pin connector, you will need a different cartridge; please call SawStop for details.
Features:

Fits all SawStop table saw models, except older industrial models with a clear case and 15-pin connector

Compatible with all woods and other non-conductive materials

Brake replacement is quick and easy

What’s Included:

(1) SawStop Dado Brake Cartridge for 8" dado blades

FAQs

Does this cartridge work with all 8" dado stacks?

Yes. It is compatible with standard 8‑inch dado stacks up to 13/16" wide on compatible SawStop saws.

Does the blade have to be completely dry/clean for the brake to function?

No. The brake still works with a normal amount of dust or pitch, but excessive moisture, wet lumber, or heavy buildup can cause false activation, so clean and dry blades are recommended.
Sawstop

Premium Dado Set - 8"

+$319.00
Sawstop

Premium Dado Set - 8"

Item #183665 Model BTS-DS8-2402

More Info
This SawStop Premium 8" Dado Blade Set is suited for cutting hardwoods and softwoods with minimal tear-out. It is compatible with all SawStop Table Saws, including: ICS, PCS, CNS, and JSS models.

Features:

Suited for cutting hardwoods and softwoods

Minimal tear out

Compatible with all SawStop Table Saws

Specifications:

Blade Diameter: 8"

Number of Teeth: 24

Arbor Size (Bore): 5/8"

Maximum Cut Width: 29/32"

Minimum Cut Width 1/4"

Hook Angle: -5°

What’s Included:

(1) SawStop 8" Premium Dado Blade Set that includes:

(2) 24T Outside Blades

(5) Chippers – (1) 1/4", (2) 1/8", (1) 1/16" and (1) 3/32")

(6) Shims

(1) Plastic Case
Sawstop

18" Under Table Cabinet

+$529.00
Sawstop

18" Under Table Cabinet

Item #189207 Model TSA-UTC18

More Info
Complete your workshop with the SawStop 18" Under Table Cabinet, designed to fit perfectly beneath your SawStop cast iron table saw.

Features:

1 vertical pegboard and 4 horizontal fully-extendable drawers offer storage for a variety of tools and accessories.

Durable, stain and impact-resistant UHMW top provides an additional work surface

Heavy-duty welded steel construction. 4 locking, swivel casters for easy mobility. Smooth, slow-close drawer slides

Foam block insert allows customized, secure storage

Specifications:

Dimensions: 18" W x 25.25" D x 31.5" H

Weight: 103 lbs

Casters: 4" diameter

Shipping / Billing Information
This product ships direct from the manufacturer:

Your order will ship in approximately 5 business days.

This product is considered special order. Your account will be charged when you place your order.

Express or overnight shipping is not available for this product.

Ships by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.

Inspect all freight shipments at time of delivery. If damage or missing pieces, are suspected, please note on driver paperwork.
Return Information
SawStop does not accept returns. If your shipment was damaged, please refuse shipment and call SawStop's customer service department at 503-595-2665.

Warranty Information
SawStop warrants that their saws are free from defects in materials and workmanship for a period of two years from the purchase date, and covers their motors for a period of 5 years. If you have a warranty question, please contact SawStop customer service @ 503-582-9934.
Sawstop

32" Under Table Cabinet

+$745.00
Sawstop

32" Under Table Cabinet

Item #189208 Model TSA-UTC32

More Info
Complete your workshop with the SawStop 32" Under Table Cabinet, designed to fit perfectly beneath your SawStop cast iron table saw.

Features:

1 vertical pegboard and 4 horizontal fully-extendable drawers offer storage for a variety of tools and accessories.

Durable, stain and impact-resistant UHMW top provides an additional work surface

Heavy-duty welded steel construction. 4 locking, swivel casters for easy mobility. Smooth, slow-close drawer slides

Foam block insert allows customized, secure storage

Specifications:

Dimensions: 32" W x 25.25" D x 31.5" H

Weight: 146 lbs

Casters: 4" diameter

Shipping / Billing Information
This product ships direct from the manufacturer:

Your order will ship in approximately 5 business days.

This product is considered special order. Your account will be charged when you place your order.

Express or overnight shipping is not available for this product.

Ships by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.

Inspect all freight shipments at time of delivery. If damage or missing pieces, are suspected, please note on driver paperwork.
Return Information
SawStop does not accept returns. If your shipment was damaged, please refuse shipment and call SawStop's customer service department at 503-595-2665.

Warranty Information
SawStop warrants that their saws are free from defects in materials and workmanship for a period of two years from the purchase date, and covers their motors for a period of 5 years. If you have a warranty question, please contact SawStop customer service @ 503-582-9934.
Sawstop

Revolution Miter Gauge

+$475.00
Sawstop

Revolution Miter Gauge

Item #189413 Model TSA-RMG

More Info
SawStop’s new patent-pending Revolution Miter Gauge delivers unmatched precision and accuracy with the spin of a dial. Intuitive, tool-free adjustments provide fine-tuning that is exact, reliable and repeatable.

Features:

Tool-free setup and adjustment

Sliding wedge system for fence attachments and repeatable stops

Quick and easy setting of locked angle adjustments at 1/10°, 1/4°, 1/2° and 1°, or

Free rotation

Smooth glide and secure miter-slot fit with dynamic expansion disks

Articulating flip stop enables micro-adjustment in 1/64" increments and tool-free use, even with a sacrificial fence face

Sliding flip stop with mounting holes for adding jigs or locking to wedge system

Tool-free expansion and adjustment of fence for cuts up to 37"

Heavy-duty construction, including a steel miter plate manufactured with machine

Tolerances of <.001" for exceptional precision

Specifications:

Miter Bar Length: 20"

Angle Range: 60° left and right

Fence Length: 19-1/2" retracted - 37-1/2" fully extended

Fence Height: 3"

Weight: 8.4 lbs

What’s Included:

(1) SawStop Revolution Miter Gauge TSA-RMG
Sawstop

Scale Miter Gauge

+$265.00
Sawstop

Scale Miter Gauge

Item #189414 Model TSA-SMG

More Info
Designed to enhance the precision of your table saw, the SawStop Scale Miter Gauge (SMG) is meticulously engineered for unparalleled accuracy. Its protractor head boasts a pointer-and-notch alignment mechanism, securing 181 precise angles with unwavering reliability. Complementing this, the SMG features a premium adjustable miter bar that securely anchors the gauge, while a robust extendable fence and micro-adjustable flip stop enable seamless repeated cuts of consistent lengths. Elevate your woodworking endeavors to unprecedented levels of accuracy with this exceptional miter gauge, setting new standards in craftsmanship.

Features:

Options for free rotation or locked angle increments of 1°

Adjustable expansion disk for a secure fit in the miter slot

18" extendable fence with micro-adjustable flip stop

Aluminum fence provides a larger reference for holding workpieces accurately

Specifications:

Angle Range: 90° left to 90° right

Miter Bar Dimensions: 3/8" x 3/4" 18"

Fence Height: 2-3/8"

Angle Detents: 181

Fence Length: 18-1/4" Retracted - 31-1/2" Fully Extended

Weight: 6.2 lbs.

What's Included:

(1) SawStop Scale Miter Gauge TSA-SMG

Total Price

$5,940.00

About This Product

The SawStop Industrial Cabinet Saw with 52" Industrial T-Glide Fence System, 5 HP, 1-Phase, 230V delivers the power, capacity and control needed for demanding table saw work. A 5 HP motor drives the 10" blade while the 52" Industrial T-Glide Fence System provides substantial rip capacity and dependable workpiece positioning across the table.

SawStop’s patented safety system adds a critical layer of protection during operation, while the diagnostic system confirms that the saw is ready to respond. A riving knife reduces the risk of kickback and the tool-free quick-change blade guard mount simplifies guard setup. The dust-collection blade guard and 4" dust port help capture debris at the saw.

A cast-iron table provides a substantial working surface, with extension wings increasing the table width to 44". The blade cuts up to 3-1/8" deep at 0° and 2-1/4" at 45°. An 8" dado set can also be used with the required separate brake cartridge and table insert.

Features:

SawStop’s patented safety system
Riving knife reduces the risk of kickback
Tool-free quick-change blade guard mount
Diagnostic system ensures the saw is ready to respond
Dust-Collection Blade Guard
52" Industrial T-Glide Fence System
5 HP motor 1-phase, 230V 60 HZ

Specifications:

Overall saw dimensions: 85-1/4" wide x 36-1/2" deep x 34" high
Cabinet footprint: 20" x 25"
Cast-iron table: 24" w x 30" d
Cast-iron table size with extension wings: 44" w x 30" d
Motor: 5 HP, 1-phase, 230V 60 HZ
Weight: 685 lbs.
Blade: 60-tooth, professional grade, 5/8" arbor
Blade diameter: 10"
Blade tilt: left
Blade kerf: 0.118" (3mm)
Blade plate thickness: 0.078"
Max. depth of cut, blade at 0º: 3-1/8"
Max. depth of cut, blade at 45º: 2-1/4"
Max. rip, left of blade: 12-1/2"
Dado diameter: 8" (requires a separate brake cartridge and table insert)
Dado max. width: 13/16"
Arbor diameter at blade: 5/8"
Table in front of blade (max. elevation): 11"
Table behind blade (max. elevation): 9-3/4"
Table flatness measured diagonally: 0.010" maximum gap
Miter slots: T-shaped, 3/4" at top, 1" at bottom, 3/8" deep
Dust-collection port diameter: 4"
Riving knife/splitter thickness: 0.090" (2.3mm)
Insert: zero clearance, phenolic core, melamine surfaces
Belts: 2 V-ribbed belts

What's Included:

(1) SawStop Industrial Cabinet Saw with 52" Industrial T-Glide Fence System - 5 HP - 1PH - 230V

Product Videos

Other Product Recommendations

Industrial Cabinet Saw with 52" Industrial T-Glide Fence System - 5 HP - 1PH - 230V

$ 5,940 00

$ 5,940 00 Was ~~$5,940.00~~

Industrial Cabinet Saw with 52" Industrial T-Glide Fence System - 5 HP - 1PH - 230V

Industrial Cabinet Saw with 52" Industrial T-Glide Fence System - 5 HP - 1PH - 230V

Frequently Bought Together