1-3/4HP 1PH 230V ProShop II Table Saw with Stamped Steel Wings and 52" Rip Capacity
This item is now out of stock with the Manufacturer. Order now for early February shipping.
With the features you expect from a high-end cabinet saw, the Jet ProShop Table Saw is a compact design of a contactor-style machine. The transparent blade guard has independent leaves, and the quick release riving knife reduces chance of kickback. A low profile riving knife is...
- Redesigned arbor lock to change blades quickly and easily
- Quick release riving knife for hassle free riving knife changes
- Improved dust shroud around blade for greater dust collection
- Convenient, magnetic paddle switch for the safest operation possible
- Innovative single belt design for easier belt tensioning and reduced vibration
- Motor reset switch conveniently relocated to the power switch, instead of the motor
- Low profile riving knife included
- Redesigned guard for better protection and ease of use
- On board storage for all included accessories
- CSA certified
- Motor: 1-3/4 HP, 230 V, 1 PH, 7.4 A
- Dimensions: 43" H x 82" L x 40" W
- Recommended Circuit Size (Amps.): 10
- Table Height from Floor (In.): 34-3/4
- Maximum Depth of Cut at 45 Degrees (I n.): 2-1/8
- Maximum Width of Dado (In.): 13/16
- Table Size (L x W) (In.): 20 x 27
- Table in Front of Saw Blade at Maximum Depth of Cut (In.): 8.81
- Table Size with Extension (L x W) (In.): 44 x 27
- Arbor Speed (RPM): 4000
- Maximum Rip Left of Blade (In.): 13-1/2
- Maximum Depth of Cut (In.): 3-1/8
- Miter Gauge Type: T-Slot with Stops
- Table Type: Cast Iron
- Arbor Diameter (In.): 5/8
- Dust Collection Minimum CFM Required (CFM): 350
- Maximum Rip Right of Blade (In.): 52
- Maximum Diameter of Dado (In.): 8
- Blade Diameter (In.): 10
- Table Size with Full Extensions (L x W) (In.): 80 x 27
- Dust Port Outside Diameter (In.): 4
- Net Weight (lbs): 286
- Gross Weight (lbs): 313
Shipping / Billing Information
All shipments must be inspected and any damage reported within 3 days of receipt.
Address corrections and cancellations may not be possible once order is submitted. Requested changes may incur additional charges.
This product ships direct from the manufacturer:
- Your order will ship in 5 business days.
- This product is considered special order. Your account will be charged when you place your order.
- Express or overnight shipping is not available for this product.
- Ships by Ground to the 48 contiguous states. Cannot ship to Alaska, Hawaii, PO Boxes, APOs, US Territories, Canada or other foreign countries.
Instructions / MSDS
ProShop II 10" Table Saw with Cast Wings and 52" Rip Capacity - 1-3/4 HP 1 Ph 115V - JPS-10Item 424377
ProShop II 10" Table Saw with Cast Wings and 30" Rip Capacity - 1-3/4 HP 1 Ph 115V - JPS-10Item 424376
XACTASAW Deluxe 10" Table Saw with Cast Wings and 50" Rip Capacity - 3 HP 1 Ph 230V - JTAS-10DXItem 837474
XACTASAW Deluxe 10" Table Saw with Cast Wings and 30" Rip Capacity - 5 HP 1 Ph 230V - JTAS-10DXItem 837479
XACTASAW Deluxe 10" Table Saw with Cast Wings and 30" Rip Capacity - 3 HP 1 Ph 230V - JTAS-10DXItem 837473
XACTASAW Deluxe 10" Table Saw with Cast Wings and 50" Rip Capacity - 5 HP 1 Ph 230V - JTAS-10DXItem 837480
XACTASAW Deluxe 12" Table Saw with Cast Wings and 50" Rip Capacity - 5HP 1 Ph 230V - JTAS-12-DXItem 417145
10" Table Saw with 50" Rip Capacity Accu-Fence and Router Lift - 3 HP 1 Ph 230V PM - 2000BItem 424389