View a Larger Image of 4" Super Dust Deputy Deluxe
View a Larger Image of 4" Super Dust Deputy Deluxe
View a Larger Image of 4" Super Dust Deputy Deluxe
  • View a Different Image of 4" Super Dust Deputy Deluxe
  • View a Different Image of 4" Super Dust Deputy Deluxe
  • View a Different Image of 4" Super Dust Deputy Deluxe
  • Default
Item 162571
Model AXD002040A

Oneida Air Systems - 4" Super Dust Deputy Deluxe

$219.99

(6) Reviews
Write a Review
In Stock

Finally, a turnkey kit from Oneida Air Systems made just for woodworkers with single-stage dust collectors! Single-stage dust collectors are great for small, hobbyist shops but they come with a...

More Details
Videos

Compare With

Details

Finally, a turnkey kit from Oneida Air Systems made just for woodworkers with single-stage dust collectors! Single-stage dust collectors are great for small, hobbyist shops but they come with a cost … fine dust quickly clogs the filter, reducing suction and leaving your tools as messy as ever! Worse still, there is nothing to protect your dust collector from damage should you accidentally suck up large wood chunks or fasteners. Oneida Air Systems' patented Super Dust Deputy® cyclone separates over 99% of dust and debris from the incoming airstream, virtually eliminating filter clogging, suction loss, and significantly prolonging the lifespan of your filter media. The 4" Super Dust Deputy Deluxe Kit has a small 16" footprint and assembled height under 42", making it the perfect shop accessory for small shops like your garage or even low ceiling basement shops. Cyclone molded from an industrial, abrasion resistant HDPE resin. Static dissipative construction safely conveys static charge build-up to the electrical ground, preventing harmful discharges.

Features:

• Retrofits to single-stage 1/2 HP to 3 HP dust collectors

• Ultra-high efficiency with integrated air ramp and 4" neutral-vane inlet

• Inlet Size: 4" OD (3.75" ID); Outlet Size: 4" OD (3.65" I.D.)

• Small 16" footprint and assembled height under 42"; weighs less than 12 lbs.

• Deluxe kit includes a lightweight, 15-gal. dustbin with quick-release latch

Videos

Reviews

6 Reviews
Write a Review
  1. by on

    Tested agains the new Jet Cyclonic separator

    I was not very interested in buying it because it is big and the paper drum is not what i had in mind... Bougth the Jet cyclonic separator with drum... The jet looked very nice but only catched less than half of chips... Went to Woocraft and got Onaida 4 inch.. huge difference....the latch and the drum truly suck... but i will replace them later...not cheap but the best in the market...Posted a test comparison review on youtu be

  2. by on

    Buy the regular 5” Super DD

    This thing is not what I expected from onieda, especially for the price. It’s nice that it is basically plug and play. Just attach the gasket and go. However, this thing produces a massive hit to your CFM. The difference between a direct hose, and this thing in between is huge. Molded parts don’t mate particularly well, and the 4” adapter fitting is stretched with screws that enter the airstream and disrupt airflow. It does separate out the chips and fine dust well, but I feel like the bigger 5” would produce a smaller hit to the cfm. Good chip separation becomes moot if you lose the ability to collect the bulk at the tool.

  3. by on

    Way too small

    This particular model comes with the 15 gallon fiber drum which seemed like a good idea as it was an all-in-one solution. I personally like fiber drums because I feel like they're the right mix of weight and strength so this looked like a good purchase. However, a 15 gallon drum is way too small for any amount of woodworking short of hand tools. I only ran a few boards through my planer and this thing was already full. Latches on fiber drums lock good but aren't made for removing all the time like you'll find yourself doing with this tiny one. It's also not very heavy so unless you anchor the drum & dust deputy to something, it will fall over constantly. I started looking around for a 55 gallon fiber drum and one of the things I noticed on the Oneida website was this kit is designed to work with this 15 gallon drum only, and they recommend the DIY or 5" model if you plan on doing your own. Bottom line, don't buy this package.

  4. by on

    Extremely effective cyclone

    I bought this to put in front of a 1-1/2 HP dust collector and almost no dust gets through to the dust collector bag. The dust collection bin fills up quickly when planing but I knew that would be the case. It's perfectly adequate for most other uses. The size fits nicely in my small shop which was the reason I went with this rather than a larger cyclone. I did order a plastic insert and bags from Oneida to make emptying the system quick and painless. I sprayed the fiber bin with several coats of spar urethane to seal it and protect it from moisture. There are two small points that I would subtract a half point for; the metal band that secures the cyclone to the bin can be a little fiddly, and the system could really use a window so you can see how full the bin is. Other than that, it's a great little system.

  5. by on

    Works very well

    I have a 14 inch bandsaw in an area separate from my main dust collection system and needed something simple to deal with the dust. This is hooked up between the saw and the 1 hp collector seems to be collecting most, if not all, of the dust. The band on the barrel has been a little bit hard to get on and off, but should improve with use. I do have the barrel up off the floor as I am not sure how water resistant it is. Nice simple setup, which should work well in similar situations.

  6. by on

    Worth it!

    It works beautifully. When it says it pics off 99% of sawdust it's true. I've been using it for 3 months now and still haven't emptied my dust collector. Definitely a good buy.