Instant Bond CA Adhesive - Gel - 4 oz
Titebond Instant Bond is a two-part bonding system that takes between 5 - 15 seconds to set and 30 - 60 seconds for initial cure. It provides a strong, permanent bond and is ideal for hard to reach joints or surface areas that are difficult to clamp. Designed primarily for wood and wood...
Titebond Instant Bond is a two-part bonding system that takes between 5 - 15 seconds to set and 30 - 60 seconds for initial cure. It provides a strong, permanent bond and is ideal for hard to reach joints or surface areas that are difficult to clamp. Designed primarily for wood and wood products, this adhesive is also very effective on a wide variety of materials and substrates. The gel product offers an assembly time of 7 seconds and an initial cure speed of 5 seconds. In addition to typical bonding applications, it is ideal for MDF and porous woods and excellent for filling large gaps. For even faster adhesion, the Instant Bond Activator cuts set time nearly in half!
- Ideal for MDF and porous woods and excellent for filling large gaps
- Fast set - eliminates clamping or reduces clamp time
- Bonds stronger than wood
- Excellent heat and solvent-resistance
- Versatile - Bonds wood, MDF, acrylic, granite, natural rubber, PVC and more
- Type: Cyanoacrylate (CA) glue
- Viscosity: Gel
- Assembly Time: 30 seconds
- Cure Time: 20 seconds
- (1) Titebond® - Instant Bond CA Wood Adhesive - Gel - 4 oz Bottle
Instructions / MSDS
Articles & Blogs
Making Christmas decorations is a great way to get into the holiday spirit, but it’s also a very effective way to make use out of small or awkward sized scrap wood that’s cluttering up the shop or just being thrown away. Even old, worn out and broken decorations that have been cast aside can be given new life by adding them as accents to these projects.
I needed a better way to carve a Halloween pumpkin than just using
a kitchen knife. The solution was to make two cutters using a jigsaw blade and
a scrollsaw blade. The jigsaw blade
would be my rough cutter and the scrollsaw blade my detail cutter.
It may be easier to buy
those plastic handled pumpkin cutters at your local mart store for this
project, but where is the woodworking fun and challenge plus an opportunity to
go to your favorite woodworking store and talk shop at Woodcraft! We have all
the items required to make these tools in case you don’t already have them in
This glue is excellent for gap filling
This is the go to CA glue when doing lathe work on wood having splits and gaps. It should not be worked immediately as with thin CA glues which are used for repairing hairline cracks.
Just glued up three pen blanks and all three slipped when I used the reamer to clean up the ends. Now I'm online ordering replacement tubes and the other super glue I've used for years.