View a Larger Image of T-Track Plus, 48" Length
View a Larger Image of T-Track Plus, 48" Length
View a Larger Image of T-Track Plus, 48" Length
  • View a Different Image of T-Track Plus, 48" Length
  • View a Different Image of T-Track Plus, 48" Length
  • View a Different Image of T-Track Plus, 48" Length
Item 143218
Model TTRACKPLUS48

Incra - T-Track Plus, 48" Length

$23.99

This item has an additional shipping charge

 (4) Reviews Write a Review
In Stock check in-store availability

Add accuracy and precision to your jigs and fixtures with T-Track Plus from Incra. These tracks are designed with a host of enhancements. Like other tracks, the extruded anodized aluminum...

More Details

You May Also Like

Details

Add accuracy and precision to your jigs and fixtures with T-Track Plus from Incra. These tracks are designed with a host of enhancements. Like other tracks, the extruded anodized aluminum construction is designed to house a 1/4"-20 bolt head, but that’s where the similarity ends. First, this track features a “well” in the extrusion allowing the track to be mounted using the included #8 pan head screws versus #6 flat head screws used by other tracks. The extra depth of the “well” allows the use of 1/4"-20 nuts that are not accommodated by other tracks. On the T-Track Plus there is the addition of a highly accurate Lexan scale that can be moved to a “zero” reference. The T-Track Plus is sized to fit a 1-1/4" wide opening.

  • Adds accuracy and precision to your jigs
  • Allows the use of 1/4"-20 nuts
  • 48" length

Reviews

4 Reviews
Write a Review
  1. by on

    It's an OKAY track, but not super

    Its difficult to incorporate into a fence for a radial arm saw.

  2. by on

    Makes a jig outstandingly useful!

    The embedded tape measure is a time saving feature for my workbench/assembly table. The flange bolts slide easily bover the mounting screws. It was a great added featrure to include the mounting screws. A quality product.

  3. by on

    Perfect for my purpose

    The existing tall fence on my add-on drill press table was interferring with the laser centers. I bought this track and a pair of tracklocks to replace that fence. It works beautifully. Gives a positive fence stop for the workpiece that is short enough to not interfere with the laser centers or the presses handles. I added a couple of flip stops to use as stops along this track and have the perfect drill press fence. Functional, but unobtrusive. I will probably purchase an additional shorter length for those time I don't need the full 4' length fence.

  4. by on

    Adding t-track rails

    I was building add-on extensions form my miter saw -- the rules on the t-track would not allow me to "begin" their measurement at a different figure than 0. I could have cut-off the forst 9 or so inches, but I would not have the 9 inches for measurement (on stop blocks) at the far end.