Forrest - WW10206125 Woodworker II Rip Blade Alt Top Raker 10" x 20 Tooth ATB .125"
This 10" ATB/Raker blade is very aggressive and designed specifically to rip through heavy, thick stock, even at moderate feed rates. We put this blade to the test by ripping 3" red oak stock. The...
Item 85N52Model WW10407125
Item 153660Model WW10206100
Item 150266Model CM10905105
Item 85N53Model WW 10-30-7-125 -5/8"
Item 153696Model WW10401100
Item 148387Model WW10401125
Item 151314Model WW10487100
Item 816352Model WW10407100
Item 825272Model LM72R010
This 10" ATB/Raker blade is very aggressive and designed specifically to rip through heavy, thick stock, even at moderate feed rates. We put this blade to the test by ripping 3" red oak stock. The results were exceptional! We felt no need to slow our feed rate, and the resulting cut had absolutely no burn marks. 5/8" arbor hole.
- ATB/Raker blade
- Rip through heavy, thick stock
- Long life micro-grain carbide teeth
- Rip and crosscut super smooth and tear-out free
- Maximum runout .002"
Articles & Blogs
The Woodcraft Magazine June/July Issue #47 is available on-line, at your local Woodcraft store, or favorite newsstand starting Tuesday, May 29th, 2012. Featuring 4 projects, 5 Tools & Techniques, 2 Hot New Tools, 3 Tips & Tricks, and many other woodworking related topics that belong in your woodworking library. Each of the projects in this issue, as with every Woodcraft Magazine issue, comes with a Convenience-Plus Buying Guide, Cut List and in-depth explanation with detailed layout instructions.
The newest blade from Forrest Manufacturing is the 10″ Ply Veneer Worker with 70 Teeth, and is specifically designed to work with man-made materials in the plywood, vinyl clad, composite and veneer arena. Each tip is made from super hard, long life micro-grain carbide, and the ATB (35° Alternate Top Bevel) produces the smoothest cut ever seen in a hand-straightened saw blade. The 10° face hook allows for easier feed on table saws, and sides are chamfered to eliminate heat buildup and chip clearing. This thin (3/32″) kerf blade is 10″ in diameter and has a 5/8″ arbor. This blade is also available in standard (1/8″) kerf. For use on table saws and saws with slides. Made in the USA.
Luv this blade
Powers thru 2" Red Oak without breathing hard
This is the first blade that I paid more than $30 for. It came with a plastic covering that protected the teeth until it was used. Very nice! I have used it on 4/4 maple so far, I noticed only slight burn on one piece, most likely my fault. I think the only noise I heard while using it came from the saw itself. Obviously this blade is better than anything you get at [*] or[*]
Great Rip Saw Blade
I ripped some 10/4 cherry for tapered table legs with this blade. It worked great. No burning and very smooth finish.