Designed as key system components to the Festool MFT and Guide Rail systems, Festool Screw Clamps secure your workpiece for precision cutting, sanding, routing, sanding, or just about any other application. Designed to work seamlessly with holes and channels on the the Festool MFT Multifunction table and can be inserted into bottom t-slot of Festool FS Guide Rails for limitless positioning.
- Clamping thickness 4-11/16 inches (120 mm)
- Solid steel construction
- Designed for all clamping applications across the Festool System
- Includes two clamps
Articles & Blogs
CONGRATULATIONS Bill Jordan of Provo, Utah on your FESTOOL GRAND PRIZE SWEEPSTAKES WINNINGS!
Your winnings include over $6,000 in Festool Tools and accessories listed below, plus a trip for two to Las Vegas, NV, to attend a day two-day training session at Festool’s Henderson, NV, Training Facility.
Very versatile clamps
I use these clamps everywhere. I use them with my MFT-style 20mm perforated benchtop to hold all kinds of things to the bench. The end of these clamps will fit in a 1/2" hole, so I use them to hold an auxilliary fence on my tablesaw and to hold a backer strip of MDF on my shop-built coping sled.
Does The Job
The clamp feels durable and fits very well in the bottom of Festool saw track. Creates a tight join between the Festool saw track to sheet goods or other wide boards. The "threaded handle\contact pad" of the tightening mechanism that slides up and down the L-shaped track-angle bar tends to want to slide down the track-angle as the round contact pad nears the wood. Once the round contact pad touches the wood (obviously) sliding no longer occurs. The correct procedure is to shove the "threaded handle\contact pad" butt up to the wood and start tightening, rather than start tightening a 1/2" away from the wood, which some people might do at first. The "threaded handle\contact pad" portion can\will potentially slide off the L-shaped track-angle bar if you're not careful while carrying it around or transporting. I think Festool should have included a snug rubber stop at the bottom of the L-shaped track-angle bar. You could always purchase a tiny rubber flange to resolve this issue. Other than that I like the clamps and they serve their purpose.
Useful when needed but slows down process.