View a Larger Image of Clip Top Hinge w/cam Plate, 120 Degrees Full
View a Larger Image of Clip Top Hinge w/cam Plate, 120 Degrees Full
  • View a Different Image of Clip Top Hinge w/cam Plate, 120 Degrees Full
  • View a Different Image of Clip Top Hinge w/cam Plate, 120 Degrees Full
Blum 142852
Item 142852

Clip Top Hinge w/cam Plate, 120 Degrees Full

$11.99

(1) Review Write a Review
In Stock check in-store availability
Qty 1-5 6+
Each $11.99 $10.79

Removable hinge technology combined with single screw plate and hinge adjustment make these the most advanced hinges on the market today. Now with the turn of a fixed screw you can move the Cam...

More Details
Instructions / MSDS

You May Also Like

Details

Removable hinge technology combined with single screw plate and hinge adjustment make these the most advanced hinges on the market today. Now with the turn of a fixed screw you can move the Cam Action Hinge Plate up and down for precise door adjustment in the carcass. Also, with the door attached to the hinge plate, through "Spiral-Tech" depth adjustment you can move the door in or out of the carcass for perfect alignment. Other features include a flange around the perimeter of the cup for added strength and a closed cup, so you don’t see the core material of the door. Sold in pairs with screws and instructions.

  • Removable hinge technology with single screw plate and hinge adjustment.
  • Move Cam Action Hinge Plate up and down for precise door adjustment in the carcass.
  • "Spiral-Tech" depth adjustment you can move the door in or out of the carcass for perfect alignment.
  • Flange around the perimeter of the cup for added strength.
  • Sold in pairs with screws and instructions.

Instructions / MSDS

Reviews

1 Review
Write a Review
  1. by on

    I could do more adjustments than a chiro

    I used the hinges to hang the doors in a Tansu system storage unit. Some of the doors were wider than tall, some taller than wide. Two of the hinges were plenty for each door. The adjustment features were great. The fact that they did not require a dedicated 35mm Forstner bit but rather used one of my standard sizes was a money saving feature.