HIGHPOINT - 8 x 2-1/4 XT Square Drive Woodworking Screws, Flat Head, Dry Lube, 100-Piece
Extra Torque (XT) means just that! Commonly available screws will actually break around 25-30 inch/lbs. While that may be fine for drywall or other light duty applications, woodworking demands...
Item 610106Model WDC22596
Item 610110Model WDC22600
Item 610107Model WDC22597
Item 610105Model 22595
Item 610104Model 22594
Item 610108Model WDC22598
Item 610103Model WDC22593
Item 610210Model 23698
Item 610206Model WDC23696
Item 610102Model WDC22592
light duty applications, woodworking demands something better. HIGHPOINT extra torque woodworking screws are engineered for tough
applications and offer almost twice the torque values of other screws! Special attention is given to design as well as the heat treating process to
produce one tough screw! With a super sharp point and deep, biting threads, these screws will cut their way into just about any common hardwood
you will use. There are many advantages of a Square Drive design. Bits are less likely to jump out of the recess and allow you to use more driving
torque. Square Drive offers a positive “stick-fit” which tends to stay on screwdriver bit tip, which is handy starting screws overhead or from other
difficult angles. The positive fit means your bits will last longer and you are less likely to damage the screw. If you have driven screws that fall off the bit
then you understand what we mean! These screws are unplated and are coated with a specially formulated dry lubricant which reduces driving torque
and offers a minimal amount of corrosion resistance. Color may vary due to variations in the heat treating process and may exhibit shades of grey,
brown or black. Dry lube finish fasteners are recommended for interior applications only. Not recommended for use in ACQ® treated lumber.
HIGHPOINT XT woodworking screws size #6 have a #1 Square Drive recess and #8 have a #2 Square Drive recess.
- Twice the torque of other screws
- Dry lube finish
- Superior heat treat process
- Super sharp point
- Square Drive
Do yourself a good "Turn" with this scre
It is so frustrating when you are putting a screw in and the head strips or breaks or you can't remove the screw because the head strips or breaks. This would happen on about 1 out of 10 screws. I saw that the rated torque was twice that of normal screws and that the head were tighter for the "Square Bit" and I was skeptical but tried a selection of this brand of screw and I was impressed! The screw started easier and didn't "freeze" but was a smooth constant torque! I haven stripped or broken a screw yet with over 200 used! This is a good screw that you won't be disappointed in!