Woodcraft of Atlanta

503_River_Board.jpg

$220.00

Intermediate

Epoxy River Board

with Tricia Haberman

Part 1: Monday, November 2, 2026, 6 PM - 9 PM

Part 2: Tuesday, November 3, 2026, 6 PM - 9 PM

Part 3: Monday, November 9, 2026, 6 PM - 9 PM

Required Tools

Take your epoxy skills to the next level in this advanced class, where you'll craft a stunning epoxy-accented cutting board. Designed for woodworkers who have completed an epoxy pouring class, this workshop combines woodworking techniques with creative epoxy designs. What you’ll learn: Selecting and preparing wood for epoxy. Advanced epoxy pouring and design techniques. Shaping, sanding, and finishing for a functional and polished cutting board. By the end of this class, you'll have a completed, food-safe cutting board featuring a unique epoxy design, ready to impress in your kitchen or as a gift.

503_Small_Bowl.jpg

$75.00

Beginner

Turning Small Bowl

with David Bosch

Tuesday, November 3, 2026, 6 PM - 9 PM

Required Tools

In this class, you'll craft a beautiful small bowl approximately 4 inches in diameter—perfect for holding condiments, spices, or other kitchen essentials. This beginner-friendly project offers endless creative possibilities and allows you to add a unique, handcrafted touch to your kitchen décor.

503_Pen_Turning_I.png

$85.00

Beginner

Pen Turning I - Fundamentals

with David Bosch

Thursday, November 5, 2026, 5 PM - 9 PM

Required Tools

Take your wood lathe skills to the next level by turning a writing pen from a wooden blank. Processes for turning to high tolerances will be learned as well as sanding and finishing fundamentals. Students will leave with a pen they can be proud of and use for years to come. All materials are included.

503_ed.jpg

$380.00

Beginner

Introduction to Woodworking I

with Ed Proctor

Part 1: Saturday, November 7, 2026, 9 AM - 5 PM

Part 2: Sunday, November 8, 2026, 9 AM - 5 PM

Required Tools

With Intro to Woodworking I, the student will learn the basic aspects, safety measures and uses of power tools and furniture assembly procedures. You will complete a small wall hanging cabinet. You will gain hands-on experience with basic joinery' how to "4 square" a board as well as hardware installation by the end of the last session.

503_Acrilic_Casting.jpg

$75.00

Advanced

Pen Turning III - Desing & Making Custom Blanks

with David Bosch

Monday, November 9, 2026, 6 PM - 9 PM

Required Tools

Unlock the art of acrylic casting in this hands-on workshop! Students will learn to design and cast unique acrylic pen blanks, experimenting with various colors and techniques to achieve stunning effects. Whether you're new to casting or looking to refine your skills, our experienced instructor will guide you through the entire process—from mixing and pouring resin to curing and finishing high-quality blanks. All materials are included, but students are welcome to bring their own molds or pigments to personalize their creations further.

503_Flowers_.png

$95.00

Beginner

Stained Glass Panel Workshop

with Hans Meier

Tuesday, November 10, 2026, 5 PM - 9 PM

Required Tools

Create your own beautiful stained glass panel while learning the essential techniques used in traditional glasswork. In this hands-on class, you’ll learn how to select and cut glass, shape and fit individual pieces, apply copper foil, and solder the pieces together to create a finished panel with professional-looking seams and edging. Several patterns will be available to choose from, ranging from simple designs to more detailed floral and decorative patterns. You’ll have the opportunity to select a design that matches your interests and skill level, then bring it to life with your choice of colorful glass. By the end of the class, you’ll have a completed stained glass panel and the skills to continue creating your own designs.

503_Andromeda.png

$75.00

Beginner

Turning Holiday Ornaments Lite

with David Bosch

Tuesday, November 10, 2026, 6 PM - 9 PM

Required Tools

Turn one of our selection of ornament into a timeless holiday heirloom. The graceful curves of the WoodRiver® clear anodized aluminum finials beautifully complement your custom wood-turned design, creating a stunning centerpiece for the Christmas tree. This rewarding project is more than just an ornament—it’s the beginning of a meaningful tradition. Year after year, you may find yourself crafting a unique signature design to celebrate each holiday season and create keepsakes your family will treasure for generations.

503_Knife.jpg

$90.00

All Levels

Knife Scale/Handle Making

with David Bosch

Wednesday, November 11, 2026, 6 PM - 9 PM

Required Tools

David will take the student through the description of the knife kit(s), the types of sales for the handle, & pins vs. accents. He’ll guide the students through the rest of the build of their handle and finishing so they leave with a knife they can be very proud of. The student will have a choice of 4 scales or the option of buying their own.

503_Chopsitcks.jpg

$125.00

All Levels

Date Night

with Woodcraft Instructor

Thursday, November 12, 2026, 6 PM - 9 PM

Required Tools

In this Date Night Woodworking project, couples, families, and friends come together to create a simple, handcrafted item—projects will vary. With guidance from an instructor, participants will enjoy hands-on time sanding, assembling, and finishing their project in a relaxed, fun setting. Perfect for beginners, this workshop offers a unique way to connect, unwind, and create a keepsake to take home and remember the night by.

503_Joy.jpg

$75.00

Beginner

Scroll Saw I - Seasonal Projects

with Hans Meier

Friday, November 13, 2026, 9 AM - 12 AM

Required Tools

Apply your new skills to a finished project. This class rotates projects seasonally, making it perfect for repeat participation while reinforcing core techniques. You Will Learn: • Pattern transfer and layout • Inside cuts and drilling • Clean curves and detail work • Basic finishing prep

503_Compound.png

$75.00

Beginner

Scroll Saw II - Compound Cutting

with Hans Meier

Friday, November 13, 2026, 1 PM - 5 PM

Required Tools

Create dimensional objects by cutting patterns on multiple faces of a block. A key step into sculptural scroll saw work. You Will Learn: • Multi-face pattern layout • Cutting sequence planning • Dimensional accuracy You Will Learn: • Safe setup and operation • Blade installation and tension • Straight, curved, and corner cuts • Feed control and accuracy

503_Teddy_Bear.jpg

$400.00

Intermediate

Children's Heirloom Teddy Bear Rocking Chair

with Ed Proctor

Part 1: Saturday, November 14, 2026, 9 AM - 5 PM

Part 2: Sunday, November 15, 2026, 9 AM - 5 PM

Required Tools

Build this little rocking chair from white oak for your children or grandchildren, and it will be passed down for generations. This project will enhance your router, table saw, and bandsaw skills, and you will learn how to create use and sliding dovetails in chair construction. As always, machine use and safety will be discussed throughout the class.

503_Bud_Vase.jpg

$140.00

Beginner/Intermediate

Woodturning II - Bud Vase

with David Bosch

Saturday, November 14, 2026, 9 AM - 5 PM

Required Tools

In this hands-on woodturning class, you’ll learn how to turn a beautiful wooden bud vase on the lathe, transforming a simple piece of wood into an elegant and functional piece. You’ll practice essential woodturning techniques, including shaping, refining curves, and creating a smooth finished surface. Whether you’re making a thoughtful handmade gift or adding a touch of natural warmth to your home, this class is a great opportunity to develop your turning skills while creating something you’ll be proud to display.

503_Autumn_Leaf.png

$50.00

Beginner

Epoxy Projects - Autumn Leaf Coasters

with Tricia Haberman

Monday, November 16, 2026, 6 PM - 9 PM

Required Tools

Create a stunning beach-themed resin Coasters using epoxy, pigments, and layered pouring techniques to mimic rolling ocean waves and natural sandy textures. In this hands-on class, your instructor will walk you through prepping the board surface, mixing and tinting epoxy, pouring and sculpting realistic wave effects, and adding shimmering details for depth and motion. You’ll learn proper epoxy safety, color blending, heat-gun wave shaping, and finishing methods to achieve a smooth, high-gloss finish. Leave with a beautiful coastal-inspired board and the skills to continue making resin art on your own.

503_Advance_Pen_Turning.jpg

$75.00

Advanced

Pen Turning III - Turning & Assembly Custom Pen

with David Bosch

Monday, November 16, 2026, 6 PM - 9 PM

Required Tools

Take your pen-making skills to the next level! In this immersive class, students will craft a one-of-a-kind rollerball or fountain pen using their own pen blanks or those provided. With expert guidance, participants will learn advanced turning techniques, precision shaping, and high-quality finishing to create a professional-grade pen that will last a lifetime. Whether using custom-cast blanks from the Acrylic Casting Workshop or bringing their own, students will leave with a truly unique writing instrument.

503_Ice_Cream.png

$75.00

Beginner

Turning Handles and Small Projects

with David Bosch

Tuesday, November 17, 2026, 6 PM - 9 PM

Required Tools

A good Pizza Cutter or an Ice Cream Scoop is a joy to use. They also make great gifts and can be turned in a small amount of time. In this class, we will turn the Handle for a stainless-steel pizza cutter or ice cream scoop. The processes are similar for both. This is a great project for beginning and intermediate students. All materials are included.

503_Ornalents_Lite

$75.00

Beginner

Turning Holiday Ornaments Lite

with David Bosch

Thursday, November 19, 2026, 6 PM - 9 PM

Required Tools

Turn one of our selection of ornament into a timeless holiday heirloom. The graceful curves of the WoodRiver® clear anodized aluminum finials beautifully complement your custom wood-turned design, creating a stunning centerpiece for the Christmas tree. This rewarding project is more than just an ornament—it’s the beginning of a meaningful tradition. Year after year, you may find yourself crafting a unique signature design to celebrate each holiday season and create keepsakes your family will treasure for generations.

503_Robert_Bandsaw.png

$165.00

Beginner

The Bandsaw Class

with Robert Stebbins

Friday, November 20, 2026, 9 AM - 5 PM

Required Tools

This woodworking course introduces students to the principles of bandsaw operation, setup, and project construction through the creation of a custom bandsaw box. Participants will learn how proper machine tuning and blade selection contribute to accuracy, efficiency, and quality results. Using these skills, students will design and build a unique bandsaw box while developing techniques for shaping, fitting, assembly, and finishing.

503_Santa.jpg

$125.00

All Levels

Wood Carving

with Steve Wilensky

Saturday, November 21, 2026, 9 AM - 5 PM

Required Tools

In Out of My Mind Carving with Steve Wilensky, participants will learn from a master carver with a unique talent for revealing whimsical characters hidden within any piece of wood. Steve’s approach is all about creativity and intuition—guiding each student to carve out the figure that “wants to come out” of the wood. The day begins with an overview of essential skills, including how to handle, manipulate, and keep carving tools sharp while prioritizing safety. With Steve’s expert guidance, students will enjoy the peaceful rhythm of carving, allowing their imaginations to shape delightful, one-of-a-kind characters. This relaxing class is perfect for anyone eager to explore the art of whimsical woodcarving in an inspiring, hands-on environment.

503_Hollow_Form.jpg

$190.00

Intermediate

Woodturning III - Hollow Forms

with David Bosch

Saturday, November 21, 2026, 9 AM - 5 PM

Required Tools

It is Highly Recommended that you have taken Intro to Turning Bowls or have equivalent experience before taking this class. In this class you will learn how to turn a 2 Part Hollow Form/Vessel hollowed out with regular bowl turning gouges. You will complete a beautiful Hollow Form of your own design and your instructor will also teach you some other fun tricks. These Vessels are Beautiful!!

503_Cutting.png

$165.00

Beginner

Cutting Boards

with Ricardo Hernandez

Saturday, November 21, 2026, 10 AM - 4 PM

Required Tools

The instructor will guide the student through the choosing of the right hardwood all the way to what finish to put on your completed cutting board. You will be using the Planer, Drum Sander, Bandsaw, Disc & Spindle Sander & Hand Router by end of day. The instructor will teach you how to properly glue up a segmented cutting board, how to clamp w/ even pressure & choose the best finish.

503_Ornaments.png

$250.00

Advanced

Woodturning IV - Segmented Holliday Ornaments

with John Rudert

Part 1: Monday, November 30, 2026, 6 PM - 9 PM

Part 2: Tuesday, December 1, 2026, 6 PM - 9 PM

Part 3: Saturday, December 5, 2026, 9 AM - 5 PM

Required Tools

Experience the art of fine segmented woodworking and woodturning with John Rudert, Master Craftsman, in this exclusive, hands-on Master Class. This unique opportunity takes you through the complete creation of a sophisticated holiday ornament, from the first lines of the design to the final application of finish. Over the first two evenings, John will guide you through design development, wood selection, precision segment cutting, and meticulous glue-up, emphasizing the accuracy and craftsmanship essential to successful segmented work. The final full-day session brings the project to the lathe, where you’ll transform your carefully prepared blank into an elegant ornament globe and finial before completing the piece with a professional finish.

503_Small_Bowl.jpg

$75.00

Beginner

Turning Small Bowl

with David Bosch

Tuesday, December 1, 2026, 6 PM - 9 PM

Required Tools

In this class, you'll craft a beautiful small bowl approximately 4 inches in diameter—perfect for holding condiments, spices, or other kitchen essentials. This beginner-friendly project offers endless creative possibilities and allows you to add a unique, handcrafted touch to your kitchen décor.

503_Flowers.png

$95.00

Beginner

Stained Glass Panel Workshop

with Hans Meier

Wednesday, December 2, 2026, 5 PM - 9 PM

Required Tools

Create your own beautiful stained glass panel while learning the essential techniques used in traditional glasswork. In this hands-on class, you’ll learn how to select and cut glass, shape and fit individual pieces, apply copper foil, and solder the pieces together to create a finished panel with professional-looking seams and edging. Several patterns will be available to choose from, ranging from simple designs to more detailed floral and decorative patterns. You’ll have the opportunity to select a design that matches your interests and skill level, then bring it to life with your choice of colorful glass. By the end of the class, you’ll have a completed stained glass panel and the skills to continue creating your own designs.

503_Ornalents_Lite

$75.00

Beginner

Turning Holiday Ornaments Lite

with David Bosch

Thursday, December 3, 2026, 6 PM - 9 PM

Required Tools

Turn one of our selection of ornament into a timeless holiday heirloom. The graceful curves of the WoodRiver® clear anodized aluminum finials beautifully complement your custom wood-turned design, creating a stunning centerpiece for the Christmas tree. This rewarding project is more than just an ornament—it’s the beginning of a meaningful tradition. Year after year, you may find yourself crafting a unique signature design to celebrate each holiday season and create keepsakes your family will treasure for generations.

503_Drunken_CB.png

$150.00

Beginner/Intermediate

Wavy Cutting Board

with Ricardo Hernandez

Friday, December 4, 2026, 9 AM - 5 PM

Required Tools

You’ll learn how to safely cut and reassemble your board to form smooth, organic wave patterns that look complex but are achievable with proper technique. Along the way, you’ll work with the Planer, Drum Sander, Bandsaw, Disc & Spindle Sander, and Hand Router. You will also learn proper clamping techniques for curved glue-ups, alignment tips to keep patterns seamless, and finishing practices that highlight wood grain and durability.

503_WW1.jpg

$380.00

Beginner

Introduction to Woodworking I

with Terry Nielsen

Part 1: Saturday, December 5, 2026, 9 AM - 5 PM

Part 2: Sunday, December 6, 2026, 9 AM - 5 PM

Required Tools

With Intro to Woodworking I, the student will learn the basic aspects, safety measures and uses of power tools and furniture assembly procedures. You will complete a small wall hanging cabinet. You will gain hands-on experience with basic joinery' how to "4 square" a board as well as hardware installation by the end of the last session.

503_Pen_Turning_II_.png

$95.00

Beginner/Intermediate

Pen Turning II - The Next Level

with David Bosch

Tuesday, December 8, 2026, 6 PM - 9 PM

Required Tools

Ready to take your pen turning skills to the next level? This class is designed for those already familiar with pen turning basics but eager to refine their expertise. Craft a more complex pen from wooden or acrylic blanks. Students will leave with a pen they can be proud of and use for years to come. All materials are included.

503_Ornalents_Lite

$75.00

Beginner

Turning Holiday Ornaments Lite

with David Bosch

Thursday, December 10, 2026, 6 PM - 9 PM

Required Tools

Turn one of our selection of ornament into a timeless holiday heirloom. The graceful curves of the WoodRiver® clear anodized aluminum finials beautifully complement your custom wood-turned design, creating a stunning centerpiece for the Christmas tree. This rewarding project is more than just an ornament—it’s the beginning of a meaningful tradition. Year after year, you may find yourself crafting a unique signature design to celebrate each holiday season and create keepsakes your family will treasure for generations.

503_Router.jpg

$170.00

Intermediate

Router Basics & Techniques

with Terry Nielsen

Friday, December 11, 2026, 9 AM - 5 PM

Required Tools

Learn how to set-up the handheld router and router table to make different types of cuts that are used in making furniture, cabinets, boxes and other woodworking. These techniques will be used to demonstrate several project examples. This class is valuable for everyone from the beginner to the more experienced woodworker wanting to brush up on his or her router and router table skills

503_WWII.jpg

$380.00

Intermediate

Introduction to Woodworking II

with Terry Nielsen

Part 1: Saturday, December 12, 2026, 9 AM - 5 PM

Part 2: Sunday, December 13, 2026, 9 AM - 5 PM

Required Tools

In this class, the Student will expand upon what they have already learned by using the bandsaw and router, in addition to the tools learned in the previous class, to build a Shaker Side Table. The student will learn how to make the mortise and tenon joint using the Festool Domino tool, a simple Dovetail Drawer, as well as how to add a taper to a leg.

503_End_Grain_CB.jpg

$190.00

All Levels

End Grain Cutting Board

with Ricardo Hernandez

Part 1: Monday, December 14, 2026, 6 PM - 9 PM

Part 2: Tuesday, December 15, 2026, 6 PM - 9 PM

Required Tools

The instructor will guide students through the entire process of creating an eye-catching end grain cutting board, from selecting the right hardwood to applying the perfect finish. This stunning kitchen accessory may look challenging, but it's amazingly easy to make thanks to a simple trick for creating the lively geometric pattern. Over the course of these two-day sessions, participants will learn to use various power tools and master gluing and clamping techniques, ensuring they complete their own unique and beautifully finished pieces.

503_Pizza_Cutter.png

$75.00

Beginner

Turning Handles and Small Projects

with David Bosch

Tuesday, December 15, 2026, 6 PM - 9 PM

Required Tools

A good Pizza Cutter or an Ice Cream Scoop is a joy to use. They also make great gifts and can be turned in a small amount of time. In this class, we will turn the Handle for a stainless-steel pizza cutter or ice cream scoop. The processes are similar for both. This is a great project for beginning and intermediate students. All materials are included.

503_Ornalents_Lite

$75.00

Beginner

Turning Holiday Ornaments Lite

with David Bosch

Thursday, December 17, 2026, 6 PM - 9 PM

Required Tools

Turn one of our selection of ornament into a timeless holiday heirloom. The graceful curves of the WoodRiver® clear anodized aluminum finials beautifully complement your custom wood-turned design, creating a stunning centerpiece for the Christmas tree. This rewarding project is more than just an ornament—it’s the beginning of a meaningful tradition. Year after year, you may find yourself crafting a unique signature design to celebrate each holiday season and create keepsakes your family will treasure for generations.

503_Kumiko_Lantern.jpg

$380.00

Intermediate

Kumiko Lantern

with Deana Spencer

Part 1: Saturday, December 19, 2026, 9 AM - 5 PM

Part 2: Sunday, December 20, 2026, 9 AM - 5 PM

Required Tools

Kumiko is a quiet and thoughtful technique that requires patience and precision. The ancient Japanese woodworking technique consists of making patterns from small pieces of interlocking wood. In this course, your instructor would walk you through the steps needed to create delicate pieces of art with wood. Discover how to seamlessly blend art and craftsmanship by mastering the use of geometry, patterns, and clean lines. Take your woodworking skill to the next level. By the end of the course every student will have created a beautiful lantern with a Kumiko pattern on the sizes.

503_Scroll_Saw_I.png

$75.00

Beginner

Scroll Saw I - Basics

with Hans Meier

Saturday, December 19, 2026, 9 AM - 12 PM

Required Tools

Scroll-sawing the most popular, rewarding and safest of all woodworking activities. The tool is easy for beginning woodworkers of all ages to create a wide variety of useful and fun items. This class will show you how to set-up and use the saw, select the proper blade for different projects, find or create and use patterns, and to sand and finish your creation. You will practice basic in- and outside cuts to make sticks figures, puzzles, three-dimensional objects, and much more.

503_Santa.jpg

$125.00

All Levels

Wood Carving

with Steve Wilensky

Saturday, December 19, 2026, 9 AM - 5 PM

Required Tools

In Out of My Mind Carving with Steve Wilensky, participants will learn from a master carver with a unique talent for revealing whimsical characters hidden within any piece of wood. Steve’s approach is all about creativity and intuition—guiding each student to carve out the figure that “wants to come out” of the wood. The day begins with an overview of essential skills, including how to handle, manipulate, and keep carving tools sharp while prioritizing safety. With Steve’s expert guidance, students will enjoy the peaceful rhythm of carving, allowing their imaginations to shape delightful, one-of-a-kind characters. This relaxing class is perfect for anyone eager to explore the art of whimsical woodcarving in an inspiring, hands-on environment.

503_Scroll_Saw_I_-_Projects.png

$75.00

Beginner

Scroll Saw I - Seasonal Projects

with Hans Meier

Saturday, December 19, 2026, 1 PM - 5 PM

Required Tools

Apply your new skills to a finished project. This class rotates projects seasonally, making it perfect for repeat participation while reinforcing core techniques. You Will Learn: • Pattern transfer and layout • Inside cuts and drilling • Clean curves and detail work • Basic finishing prep

503_Hand_Tools_Program.png

$525.00

Beginner

Hand Tools Woodworking Fundamentals

with Robert Stebbins

Part 1: Tuesday, January 5, 2027, 6 PM - 9 PM

Part 2: Thursday, January 7, 2027, 6 PM - 9 PM

Part 3: Tuesday, January 12, 2027, 6 PM - 9 PM

Part 4: Thursday, January 14, 2027, 6 PM - 9 PM

Part 5: Tuesday, January 19, 2027, 6 PM - 9 PM

Part 6: Thursday, January 21, 2027, 6 PM - 9 PM

Part 7: Tuesday, January 26, 2027, 6 PM - 9 PM

Part 8: Thursday, January 28, 2027, 6 PM - 9 PM

Required Tools

Master the core skills of traditional woodworking using only hand tools. This comprehensive series introduces sharpening, planing, sawing, chiseling, and dovetail joinery — all leading to a final project where you’ll build a dovetailed box by hand. Each class builds on the previous one, helping you develop accuracy, confidence, and craftsmanship with every session. Whether you’re new to hand tools or ready to refine your fundamentals, this course offers a complete foundation in classic woodworking technique.

503_Small_Bowl.jpg

$75.00

Beginner

Turning Small Bowl

with David Bosch

Wednesday, January 6, 2027, 6 PM - 9 PM

Required Tools

In this class, you'll craft a beautiful small bowl approximately 4 inches in diameter—perfect for holding condiments, spices, or other kitchen essentials. This beginner-friendly project offers endless creative possibilities and allows you to add a unique, handcrafted touch to your kitchen décor.

503_WW1-ed.jpg

$395.00

Beginner

Introduction to Woodworking I

with Ed Proctor

Part 1: Saturday, January 9, 2027, 9 AM - 5 PM

Part 2: Sunday, January 10, 2027, 9 AM - 5 PM

Required Tools

With Intro to Woodworking I, the student will learn the basic aspects, safety measures and uses of power tools and furniture assembly procedures. You will complete a small wall hanging cabinet. You will gain hands-on experience with basic joinery' how to "4 square" a board as well as hardware installation by the end of the last session.

503_Intro_Spindles.png

$120.00

Beginner

Woodturning I - Spindles

with David Bosch

Saturday, January 9, 2027, 9 AM - 5 PM

Required Tools

Have you ever wanted to try turning on a wood lathe? Join us in this introductory class and learn about the lathe and associated tools. Not only will you learn proper processes for spindle turning on the lathe safely and effectively, but you’ll also go home with an attractive candlestick holder. Use the basic skills from this class to move on to other turning classes like pen and bowl turning. All materials are included.

503_Router.jpg

$160.00

Intermediate

Router Basics & Techniques

with Terry Nielsen

Friday, January 15, 2027, 9 AM - 5 PM

Required Tools

Learn how to set-up the handheld router and router table to make different types of cuts that are used in making furniture, cabinets, boxes and other woodworking. These techniques will be used to demonstrate several project examples. This class is valuable for everyone from the beginner to the more experienced woodworker wanting to brush up on his or her router and router table skills

503_WW1.jpg

$395.00

Beginner

Introduction to Woodworking I

with Terry Nielsen

Part 1: Saturday, January 16, 2027, 9 AM - 5 PM

Part 2: Sunday, January 17, 2027, 9 AM - 5 PM

Required Tools

With Intro to Woodworking I, the student will learn the basic aspects, safety measures and uses of power tools and furniture assembly procedures. You will complete a small wall hanging cabinet. You will gain hands-on experience with basic joinery' how to "4 square" a board as well as hardware installation by the end of the last session.

503_Scroll_Saw_I.png

$75.00

Beginner

Scroll Saw I - Basics

with Hans Meier

Saturday, January 16, 2027, 9 AM - 12 PM

Required Tools

Scroll-sawing the most popular, rewarding and safest of all woodworking activities. The tool is easy for beginning woodworkers of all ages to create a wide variety of useful and fun items. This class will show you how to set-up and use the saw, select the proper blade for different projects, find or create and use patterns, and to sand and finish your creation. You will practice basic in- and outside cuts to make sticks figures, puzzles, three-dimensional objects, and much more.

503_Santa.jpg

$125.00

All Levels

Wood Carving

with Steve Wilensky

Saturday, January 16, 2027, 9 AM - 5 PM

Required Tools

In Out of My Mind Carving with Steve Wilensky, participants will learn from a master carver with a unique talent for revealing whimsical characters hidden within any piece of wood. Steve’s approach is all about creativity and intuition—guiding each student to carve out the figure that “wants to come out” of the wood. The day begins with an overview of essential skills, including how to handle, manipulate, and keep carving tools sharp while prioritizing safety. With Steve’s expert guidance, students will enjoy the peaceful rhythm of carving, allowing their imaginations to shape delightful, one-of-a-kind characters. This relaxing class is perfect for anyone eager to explore the art of whimsical woodcarving in an inspiring, hands-on environment.

503_Scroll_Saw_I_-_Projects.png

$75.00

Beginner

Scroll Saw I - Seasonal Projects

with Hans Meier

Saturday, January 16, 2027, 1 PM - 5 PM

Required Tools

Apply your new skills to a finished project. This class rotates projects seasonally, making it perfect for repeat participation while reinforcing core techniques. You Will Learn: • Pattern transfer and layout • Inside cuts and drilling • Clean curves and detail work • Basic finishing prep

503_Cutting_Board.png

$140.00

Beginner

Cutting Boards

with Ricardo Hernandez

Friday, January 22, 2027, 9 AM - 5 PM

Required Tools

The instructor will guide the student through the choosing of the right hardwood all the way to what finish to put on your completed cutting board. You will be using the Planer, Drum Sander, Bandsaw, Disc & Spindle Sander & Hand Router by end of day. The instructor will teach you how to properly glue up a segmented cutting board, how to clamp w/ even pressure & choose the best finish.

503_Cabinet_Making.jpg

$440.00

Intermediate

Introduction to Cabinet Making

with Terry Nielsen

Part 1: Saturday, January 23, 2027, 9 AM - 5 PM

Part 2: Sunday, January 24, 2027, 9 AM - 5 PM

Required Tools

In this hands-on class, each student will complete a 15" face frame style base cabinet with drawer and a Shaker-Style door. Cabinet styles and design considerations will be discussed that can be adapted for several different applications including kitchen cabinets, entertainment centers, and bookcases. Construction of the cabinet carcass, face frame and drawer will employ the Kreg Joinery system and construction of the raised panel door will utilize the traditional cope and stick method. Additional joinery techniques for the carcass, face frame, drawer and door will be discussed. You will learn the safe and proper use of the table saw, compound miter saw, router table and finishing sander as you complete the project.

503_Bowls.png

$130.00

Beginner

Woodturning I - Wooden Bowls

with David Bosch

Saturday, January 23, 2027, 9 AM - 5 PM

Required Tools

In this class you will learn the processes for safely turning a wooden bowl on the lathe. You will complete an attractive bowl that’s about six inches in diameter and two inches deep. It is HIGHLY recommended that you take the Introduction to the Wood Lathe class prior to enrolling in this class as we will be building on the skills learned in the intro class. All materials are included.

503_Epoxy_Pouring.png

$90.00

Beginner/Intermediate

Intro to EPOXY Pouring

with Tricia Haberman

Tuesday, January 26, 2027, 6 PM - 9 PM

Required Tools

From Countertop to Live Edge Wood Surface and Floors. Epoxy Pouring required preparation, precision, and a good amount of experience and creativity. In this course our instructor will guide you in all steps to create a stunning, glossy finish that highlights the natural beauty of the wood.

503_Pen_Turning_I.png

$90.00

Beginner

Pen Turning I - Fundamentals

with David Bosch

Wednesday, January 27, 2027, 6 PM - 9 PM

Required Tools

Take your wood lathe skills to the next level by turning a writing pen from a wooden blank. Processes for turning to high tolerances will be learned as well as sanding and finishing fundamentals. Students will leave with a pen they can be proud of and use for years to come. All materials are included.

503_Drawers.jpg

$170.00

Beginner/Intermediate

Drawer Construction

with Ed Proctor

Friday, January 29, 2027, 9 AM - 5 PM

Required Tools

Elevate your woodworking prowess with our comprehensive Drawer Building Class! Whether you're a seasoned craftsman or just venturing into DIY projects, this class is tailored for you. Learn the intricacies of precise measurement, material selection, cutting-edge techniques, and seamless assembly. In class we'll explore diferent methods of contruction, depending of style, use and tools that the students have available at home. Also we'll guide a step by step process of hardware installation. Join us on this enriching journey, and unlock the skills to create stunning drawers that stand out for their craftsmanship and durability. Enroll now and bring your woodworking visions to life!

503_Kumiko_Box.jpg

$395.00

Beginner/Intermediate

Kumiko Tea Box

with Deana Spencer

Part 1: Saturday, January 30, 2027, 9 AM - 5 PM

Part 2: Sunday, January 31, 2027, 9 AM - 5 PM

Required Tools

Kumiko is a quiet and thoughtful technique that requires patience and precision. The ancient Japanese woodworking technique consists of making patterns from small pieces of interlocking wood. In this course, your instructor would walk you through the steps needed to create delicate pieces of art with wood. Discover how to seamlessly blend art and craftsmanship by mastering the use of geometry, patterns, and clean lines. Take your woodworking skill to the next level. By the end of the course every student will have created a small tea box with a Kumiko pattern on the lid.