Your Store

Woodcraft of Orlando

Image of Woodcraft of Orlando

Contact Us

Phone:
(407) 260-5002
Fax:
(407) 260-5016
Email:
orlando-retail@woodcraft.com

8155 South US Highway 17-92
GPS, use Casselberry as City instead of Fern Pk
Casselberry, FL 32730

Hours of Operation

sunday 12 PM - 5 PM
monday 9 AM - 7 PM
tuesday 9 AM - 7 PM
wednesday 9 AM - 7 PM
thursday 9 AM - 7 PM
friday 9 AM - 7 PM
saturday 9 AM - 6 PM

Connect with Us


Basic Bowl Turning

Saturday, April 28, 10 AM - 5 PM

Class Status: Open
Instructor: Bill Dalton
Skill Level: Beginner
Class Size: 2-6
Tools Required: You May Choose To Bring Your Own Tools
Description: Wooden bowls are both decorative and functional. They are an essential part of any woodturners repertoire. Here you can gain the knowledge and hands on practice you will need to turn the most elegant bowls. And of course, safety and sharpening are covered.
Prerequisite: Basic Turning
Tuition: $95
Tuition Notes: Materials $10
Click Here to Request Information

Platter Turning With A Chuck

Saturday, April 28, 10 AM - 5 PM

Class Status: Cancelled
Instructor: Bill Dalton
Skill Level: Beginner
Class Size: 2-8
Tools Required: You May Choose To Bring Your Own Tools
Description: Turned platters make very attactive household ornaments. They show off the beauty of the wood and make a great fruit or candy dish. Bill will guide you through mounting, designing and finishing as you create your own small platter from a wooden blank. Also included is working with a chuck and texturing.
Prerequisite: Basic Turning, Bowl Turning
Tuition: $95
Tuition Notes: Materials $20
Click Here to Request Information

Router Basics

Saturday, April 28, 10 AM - 3 PM

Class Status: Open
Instructor: Mark Behrens
Skill Level: Beginner
Class Size: 2-8
Tools Required: Safety Glasses & Dust Mask
Description: Here you will learn the fine points of using the router to the maximum. We will cover the basics and demo the best ways to make the router the most productive tool in your shop. You will get hands-on experience in free-hand routing and practice on a router table. If you choose, bring your own router.
Prerequisite:
Tuition: $85
Tuition Notes: Materials $5
Click Here to Request Information

Woodworking 101

Saturday, May 5, 10 AM - 5 PM

Class Status: Open
Instructor: Mark Behrens
Skill Level: Beginner
Class Size: 2-8
Tools Required: Safety Glasses & Dust Mask
Description: Everything you ned to get started in woodworking. Mark will cover the basics of woodworking starting with woodworking terminology, types of wood, wood structure, saw cuts, movement, and more. He will discuss and demonstrate set-up and use of the jointer, thickness planer, and table saw.
Prerequisite:
Tuition: $95
Tuition Notes: Materials $10
Click Here to Request Information

Woodworking 102

Sunday, May 6, 10 AM - 5 PM

Class Status: Open
Instructor: Mark Behrens
Skill Level: Beginner
Class Size: 2-8
Tools Required: Safety Glasses & Dust Mask
Description: This is the second in a series, however, Woodworking 101 is not a prerequisite. Mark will focus on the use of the planer, jointer, table saw, drill press, and router table. The culmination of this class is the construction of a mantel clock.
Prerequisite: Woodworking 101 Preferred
Tuition: $95
Tuition Notes: Materials $20
Click Here to Request Information

Pen Turning

Saturday, May 12, 10 AM - 5 PM

Class Status: Open
Instructor: Mark Behrens
Skill Level: Beginner
Class Size: 2-6
Tools Required: You May Choose To Bring Your Own Tools
Description: Learn and practice the basic techniques for turning beautiful European and Slimline pens from an assortment of materials. Mark is a skilled pen turner. This is a very popular hands-on class. !!!WARNING!!! Pen turning can become habit forming and cause you to spend hours in the shop.
Prerequisite: Basic Turning
Tuition: $95
Tuition Notes: Materials $20
Click Here to Request Information

Lathe Tool Sharpening Made Easy

Saturday, May 19, 10 AM - 4 PM

Class Status: Open
Instructor: Bill Dalton
Skill Level: Beginner
Class Size: 2-6
Tools Required: Safety Glasses
Description: This class is for anyone who is new to or struggles with sharpening their lathe tools. Find all the different grind angles and jigs confusing? This is the perfect class for you. Students are welcome to bring any tools they want to sharpen. If you have a grinder, bring it with you. We'll help you make sure it is set up and tuned properly for the best sharpening results. The class will also cover maintaining your grinder and wheels. Bill's hands-on teaching will give you the practice to get the most out of your sharpening set up.
Prerequisite:
Tuition: $85
Tuition Notes:
Click Here to Request Information

Kitchen Cabinet Construction

Part 1: Saturday, May 19, 10 AM - 5 PM
Part 2: Sunday, May 20, 10 AM - 5 PM

Class Status: Open
Instructor: Rick Lutjens
Skill Level: Intermediate
Class Size: 2-4
Tools Required: Safety Glasses & Dust Mask
Description: One of the best projects you can do for your house is to makeover your kitchen. Learn the basics for your kitchen remodeling project here. Learn how to design and construct face frame cabinets. Methods and techniques will include various options for constructing, joining and attaching face frames to the cabinet carcass. Each student will walk away with a lower cabinet. Sign up early as space is limited and this class does fill up.
Prerequisite: Basic Woodworking Experience
Tuition: $275
Tuition Notes: Materials $75
Click Here to Request Information

Introduction To The CNC Machine

Saturday, May 26, 9:30 AM - 12:30 PM

Class Status: Open
Instructor: Tim Brehm
Skill Level: Beginner
Class Size: 2-6
Tools Required:
Description: This is an introductory course to the CNC. Students will learn the basic components of a CNC machine and the fundamentals of how to design and machine a simple sign.
Prerequisite:
Tuition: $85
Tuition Notes:
Click Here to Request Information

Working With VCarve - Session I

Saturday, May 26, 1:30 PM - 5 PM

Class Status: Open
Instructor: Tim Brehm
Skill Level: Beginner
Class Size: 2-6
Tools Required: Laptop Computer
Description: This is an introductory course to VCarve software used for designing projects for the CNC. Students will learn the fundamentals of creating and machining a project on the CNC.
Prerequisite: Introduction To The CNC Machine
Tuition: $85
Tuition Notes:
Click Here to Request Information

Women's Woodworking Class

Saturday, June 2, 10 AM - 5 PM

Class Status: Open
Instructor: Mark Behrens
Skill Level: Beginner
Class Size: 2-8
Tools Required: Safety Glasses & Dust Mask
Description: Ladies, have you ever wanted to take on a project in the shop but not sure where to get started? Would you like to learn how to safely use power tools? Then this is the class for you. Here you will make a cutting board and learn how to effectively and safely use the table saw, jointer, planer, miter saw, and router. Sorry guys, ladies only.
Prerequisite:
Tuition: $95
Tuition Notes: Materials $15
Click Here to Request Information

Learn Machine Cut Dovetails

Saturday, June 9, 9:30 AM - 12:30 PM

Class Status: Open
Instructor: Mark Behrens
Skill Level: Beginner
Class Size: 2-8
Tools Required:
Description: This is a great class to learn how to make the incredibly strong dovetail joint. This class focuses on the Porter Cable 4212 jig and the Leigh D1600 jig. You will set up and cut half blind and through dovetails, learn bit selection and proper technique.
Prerequisite:
Tuition: $75
Tuition Notes: Materials $10
Click Here to Request Information

Platter Turning With A Chuck

Saturday, June 9, 10 AM - 5 PM

Class Status: Open
Instructor: Bill Dalton
Skill Level: Beginner
Class Size: 2-8
Tools Required:
Description: Turned platters make very attactive household ornaments. They show off the beauty of the wood and make a great fruit or candy dish. Bill will guide you through mounting, designing and finishing as you create your own small platter from a wooden blank. Also included is working with a chuck and texturing.
Prerequisite: Basic Turning, Bowl Turning
Tuition: $95
Tuition Notes: Materials $20
Click Here to Request Information

Learn To Make Hand Cut Dovetails

Saturday, June 9, 2 PM - 5 PM

Class Status: Open
Instructor: Mark Behrens
Skill Level: Beginner
Class Size: 2-6
Tools Required:
Description: The best way to truly sign your work is with handcut dovetails. Master furniture makers and luthiers can be identified by their dovetails. This hands on class will cover how to measure, lay out and hand cut through dovetail joints in a variety of sizes and materials.
Prerequisite:
Tuition: $75
Tuition Notes: Materials $10
Click Here to Request Information

Turning Basics

Saturday, June 23, 10 AM - 5 PM

Class Status: Open
Instructor: Bill Dalton
Skill Level: Beginner
Class Size: 2-6
Tools Required:
Description: You can create great works of art or add fancy embelishments to your woodworking pieces all from your lathe. Either way, here is where it begins. Once done with this class you will know the types, components, tools, and accessories of the lathe. Bill will demonstrate the various basic cuts and you will then get hands on practice of the fundamentals of turning, including bead, cove, and fillet cuts.
Prerequisite:
Tuition: $95
Tuition Notes: Materials $10
Click Here to Request Information

Beginning Bandsaw

Saturday, June 23, 10 AM - 5 PM

Class Status: Open
Instructor: Mark Behrens
Skill Level: Beginner
Class Size: 2-8
Tools Required:
Description: Besides the router, the bandsaw is the most versatile power tool you can own. This beginning bandsaw class will teach you the proper operation of the bandsaw as well as maitenance and set-up. When finished, you will have a beautifully laminated cutting board. Review of glues to quickly laminate boards is also covered.
Prerequisite:
Tuition: $95
Tuition Notes: Materials $15
Click Here to Request Information

Woodworking 101

Saturday, June 30, 10 AM - 5 PM

Class Status: Open
Instructor: Mark Behrens
Skill Level: Beginner
Class Size: 2-8
Tools Required:
Description: Everything you ned to get started in woodworking. Mark will cover the basics of woodworking starting with woodworking terminology, types of wood, wood structure, saw cuts, movement, and more. He will discuss and demonstrate set-up and use of the jointer, thickness planer, and table saw.
Prerequisite:
Tuition: $95
Tuition Notes: Materials $10
Click Here to Request Information

Woodworking 102

Sunday, July 1, 10 AM - 5 PM

Class Status: Open
Instructor: Mark Behrens
Skill Level: Beginner
Class Size: 2-8
Tools Required:
Description: This is the second in a series, however, Woodworking 101 is not a prerequisite. Mark will focus on the use of the planer, jointer, table saw, drill press, and router table. The culmination of this class is the construction of a mantel clock.
Prerequisite: Woodworking 101 Preferred
Tuition: $95
Tuition Notes: Materials $20
Click Here to Request Information

Basic Bowl Turning

Saturday, July 7, 10 AM - 5 PM

Class Status: Open
Instructor: Bill Dalton
Skill Level: Beginner
Class Size: 2-6
Tools Required:
Description: Wooden bowls are both decorative and functional. They are an essential part of any woodturners repertoire. Here you can gain the knowledge and hands on practice you will need to turn the most elegant bowls. And of course, safety and sharpening are covered.
Prerequisite: Basic Turning
Tuition: $95
Tuition Notes: Materials $10
Click Here to Request Information

Router Basics

Saturday, July 14, 10 AM - 3 PM

Class Status: Open
Instructor: Mark Behrens
Skill Level: Beginner
Class Size: 2-8
Tools Required:
Description: Here you will learn the fine points of using the router to the maximum. We will cover the basics and demo the best ways to make the router the most productive tool in your shop. You will get hands-on experience in free-hand routing and practice on a router table. If you choose, bring your own router.
Prerequisite:
Tuition: $85
Tuition Notes: Materials $5
Click Here to Request Information

Making Raised Panel Doors

Saturday, July 28, 9:30 AM - 12:30 PM

Class Status: Open
Instructor: Mark Behrens
Skill Level: Beginner
Class Size: 2-8
Tools Required:
Description: Learn to make rail and stile door frames and raised panels that actually fit the first time. You will learn about router requirements, tables, bit selection and stock preparation. Each student will complete a standard raised panel door.
Prerequisite:
Tuition: $65
Tuition Notes: Materials $10
Click Here to Request Information

Bowl Turning 2

Saturday, July 28, 10 AM - 5 PM

Class Status: Open
Instructor: Bill Dalton
Skill Level: Beginner/Intermediate
Class Size: 2-6
Tools Required:
Description: Ready to start some serious bowl turning? You can here. Students will start off with a "green" wood blank and learn about different turning techniques as well as drying the bowl. For the second half of the class, students will get to choose from a selection of wax sealed blanks. Using a chuck and texturing the bowl are also covered
Prerequisite: Basic Bowl Turning
Tuition: $150
Tuition Notes: Materials $50
Click Here to Request Information

Women's Woodworking Class

Saturday, August 4, 10 AM - 5 PM

Class Status: Open
Instructor: Mark Behrens
Skill Level: Beginner
Class Size: 2-8
Tools Required:
Description: Ladies, have you ever wanted to take on a project in the shop but not sure where to get started? Would you like to learn how to safely use power tools? Then this is the class for you. Here you will make a cutting board and learn how to effectively and safely use the table saw, jointer, planer, miter saw, and router. Sorry guys, ladies only.
Prerequisite:
Tuition: $95
Tuition Notes: Materials $15
Click Here to Request Information

Top of Page