ZHEN
Zhen 67-Layer Hammered Damascus VG-10 Nakiri Knife 177 mm/7" - Finished
Item
163427
Model DHC80-4S
This is a finished knife, ready for use. This super sharp VG-10 Japanese stainless steel knife is clad with 67-layer Damascus dragon pattern on both sides (33 Layers on each side). This design increases toughness, improves stain resistance, and prolongs knife life. The perfect weight...
Details
This is a finished knife, ready for use.
This super sharp VG-10 Japanese stainless steel knife is clad with 67-layer Damascus dragon pattern on both sides (33 Layers on each side). This design increases toughness, improves stain resistance, and prolongs knife life. The perfect weight balanced full length handle is made of Pakkawood which is durable, non-slip, easy to clean, waterproof, bacteria-resist, comfortable, and beautiful. Mirror polished stainless steel bolster and butt end design have made this knife even better. Every Zhen Premium knife comes with its own hand crafted gift box or storage box.
The Hammered Damascus is not only a beautiful look, but also keeps food from sticking to the blade.
The most important attribute for a chef's knife is its ability to be sharpened and stay sharp. The VG-10 stainless steel from Japan is heat treated to a hardness of HRC 60-62.
The 3-pin western style Pakkawood handle gives you comfortable use both left and right handed.
All Zhen knives have a traditional western double bevel edge.
DON'T chop bone or use knife on hard surface like glass cutting board, tile, and granite. Hand-wash your blades with gentle dish soap, rinse clean and towel dry immediately. Recommend to sharpen your blades with a whetstone at an angle of 15 degrees. Stainless Steel is imported from Japan and quality made in Taiwan.
Handle Length
125 mm (4.92")
Handle Width
21 mm (.82")
Handle to Tip Length
290 mm (11.41")
Chin to Tip Length
157 mm (6.18")
Blade Height at Chin
43 mm (1.69")
Width of Spine at Handle
2.1 mm (.082")
Width of Spine above Chin
2.1 mm (.082")
Width of Spine at Middle
2.1 mm (.082")
Width of Spine 1cm from the tip
2.1 mm (.082")
Weight
7.4 oz (209 g)
Handle material
Pakkawood
Country of origin
Steel from Japan, Made in Taiwan
This super sharp VG-10 Japanese stainless steel knife is clad with 67-layer Damascus dragon pattern on both sides (33 Layers on each side). This design increases toughness, improves stain resistance, and prolongs knife life. The perfect weight balanced full length handle is made of Pakkawood which is durable, non-slip, easy to clean, waterproof, bacteria-resist, comfortable, and beautiful. Mirror polished stainless steel bolster and butt end design have made this knife even better. Every Zhen Premium knife comes with its own hand crafted gift box or storage box.
The Hammered Damascus is not only a beautiful look, but also keeps food from sticking to the blade.
The most important attribute for a chef's knife is its ability to be sharpened and stay sharp. The VG-10 stainless steel from Japan is heat treated to a hardness of HRC 60-62.
The 3-pin western style Pakkawood handle gives you comfortable use both left and right handed.
All Zhen knives have a traditional western double bevel edge.
DON'T chop bone or use knife on hard surface like glass cutting board, tile, and granite. Hand-wash your blades with gentle dish soap, rinse clean and towel dry immediately. Recommend to sharpen your blades with a whetstone at an angle of 15 degrees. Stainless Steel is imported from Japan and quality made in Taiwan.
Handle Length
125 mm (4.92")
Handle Width
21 mm (.82")
Handle to Tip Length
290 mm (11.41")
Chin to Tip Length
157 mm (6.18")
Blade Height at Chin
43 mm (1.69")
Width of Spine at Handle
2.1 mm (.082")
Width of Spine above Chin
2.1 mm (.082")
Width of Spine at Middle
2.1 mm (.082")
Width of Spine 1cm from the tip
2.1 mm (.082")
Weight
7.4 oz (209 g)
Handle material
Pakkawood
Country of origin
Steel from Japan, Made in Taiwan
Compare With
-
Premier Copper Products
Item 168603$987.99
-
Premier Copper Products
Item 168610$1,179.99
-
Premier Copper Products
Large Round Hammered Copper Prep Sink, Faucet and Accessories Package, Oil Rubbed Bronze
Item 168596$677.99
-
Premier Copper Products
Item 168609$1,179.99