View a Larger Image of Panel Cart
View a Larger Image of Panel Cart
View a Larger Image of Panel Cart
View a Larger Image of Panel Cart
View a Larger Image of Panel Cart
View a Larger Image of Panel Cart
View a Larger Image of Panel Cart
  • View a Different Image of Panel Cart
  • View a Different Image of Panel Cart
  • View a Different Image of Panel Cart
  • View a Different Image of Panel Cart
  • View a Different Image of Panel Cart
  • View a Different Image of Panel Cart
  • View a Different Image of Panel Cart
  • Default
Item 167545
Model PC323949

WoodRiver - Panel Cart

$209.99

The WoodRiver® Deluxe Panel Cart makes it very easy to get your material from your truck bed or trailer to your table saw with minimal effort. The tilting carriage adjusts from a low horizontal...

Compare With

Details

The WoodRiver® Deluxe Panel Cart makes it very easy to get your material from your truck bed or trailer to your table saw with minimal effort. The tilting carriage adjusts from a low horizontal height of 31-1/2" to a maximum 39-1/2" to fit most table saws. The large frame adjusts from 18" wide x 36" tall to 18" wide x 45" tall to support even full 4 ft. x 8 ft. sheets of plywood. Pivoting feet can be stowed out of the way when the cart sits idle and then locked in position to quickly go to work carrying the next load. The lower cart assembly uses two 4" locking swivel casters and two 4" swivel only casters to provide rolling support to a compact but sturdy 16"-wide x 18-long frame that very easily fits through doors as narrow as 24". Don’t worry about loading down this cart because it will comfortably move up to 250 pounds of sheet material.

Features:

• Tilting carriage adjusts from a low horizontal height of 31-1/2" to a maximum 39-1/2" height

• Large pivoting frame adjusts from 18" wide x 36" tall to 18" wide x 45" tall

• Feet can be stowed out of the way when the cart sits idle to reduce cart’s footprint

• Two 4" locking swivel casters and two 4" swivel-only casters to provide rolling support

• Compact but sturdy 16"-wide x 18"-long frame fits through doors as narrow as 24"

• Comfortably move up to 250 lbs. of sheet material

Articles & Blogs

Yt thumb panel cart

This new WoodRiver panel cart is the helper you need to move up to 250lbs of sheet-goods in and around your shop.

Read More >
167545 apl 16 web

Before you tackle the spring cleaning, organization and renovation projects at your house this year, check out some of the tools, accessories and supplies at Woodcraft that will save time and cut stress.

Read More >
118713075 3313481758727550 366237142982653723 o

We asked woodworker Dave Clarke, who was diagnosed with ALS in 2018, to take a look at an article Woodcraft Magazine published in Issue 44 by Pete Stephano – “The Wheelchair Woodworker Shop” – to see if he felt that the recommendations were still relevant and if he had any other advice for folks wanting to set up a workshop with modifications. Read more here...  

Read More >

Reviews

4.0 out of 5 stars
1 Review
  1. 4.0 out of 5 stars
    by on

    Nice Compact Cart

    The cart comes nearly preassembled. It took about 5 minutes or less to unbox it and put it together. The directions were easy enough to follow although the 1st step showed a picture of the bolts for the connecting bar in the wrong location. The bolts on my cart were shipped in the connecting bar itself. I was somewhat skeptical about how sturdy it would be as the base is 16" deep and a little less than 18" wide. So far it seems sturdy and rolls well on my laminate shop floor. You just need make sure the panel is centered on the brackets. It has adequate support when the 4' x 8' panel is on the cart in both the horizontal and vertical positions. The Pivot Lock seems a bit stiff but that should loosen up with time and usage. The cart has 2 locking wheels of the 4 wheels that keep the cart in place reasonably well. There are some items that could use improvement. When the cart is adjusted to my table saw height the panel brackets are about 12" off the ground. This makes loading a full 3/4" panel from ground level to the brackets by yourself a little awkward. The panel brackets themselves need the edges rounded a bit or a nylon glide with rounded edges attached on them to make loading/unloading and protecting the panel edges better. Additionally, the bolts for the brackets need to be unscrewed almost entirely to swing the brackets out of the way. A solution may be to have the brackets mounted just on the inside of the lower part of the tube frame with a different style knob. The knob could be a changes out for a T shaped repositionable one. Overall I am pleased with the purchase. It is a good value for the money.

Top of Page