View a Larger Image of Woodpeckers OneTIME Tool Marking Gauge 6"
View a Larger Image of Woodpeckers OneTIME Tool Marking Gauge 6"
View a Larger Image of Woodpeckers OneTIME Tool Marking Gauge 6"
View a Larger Image of Woodpeckers OneTIME Tool Marking Gauge 6"
View a Larger Image of Woodpeckers OneTIME Tool Marking Gauge 6"
View a Larger Image of Woodpeckers OneTIME Tool Marking Gauge 6"
  • View a Different Image of Woodpeckers OneTIME Tool Marking Gauge 6"
  • View a Different Image of Woodpeckers OneTIME Tool Marking Gauge 6"
  • View a Different Image of Woodpeckers OneTIME Tool Marking Gauge 6"
  • View a Different Image of Woodpeckers OneTIME Tool Marking Gauge 6"
  • View a Different Image of Woodpeckers OneTIME Tool Marking Gauge 6"
  • View a Different Image of Woodpeckers OneTIME Tool Marking Gauge 6"
Woodpeckers MG-AL6-17
Item 132379

Woodpeckers OneTIME Tool Marking Gauge 6"

Out of Stock
This product is currently unavailable for purchase.
  • Ships for Free

Pre-Selling Special Orders Now!

This Item Will Not Be Available After Monday June 12, 2017... Estimated Delivery November, 2017

You May Also Like

Details

Marking Gauge and Panel Marking Gauge

Improved! Now Mark Pencil Lines or Razor Sharp Scribe Lines.

This is the 6" Marking Gauge only.

Woodpeckers OneTIME Tool®

Honest, A Pencil Line Is Often Good Enough. The wheel-style marking gauge has earned its deserved place for tight tolerance joinery layout. You just can’t beat that hairline mark cut crisply and accurately on end grain, cross grain or even with the grain. Every woodworker should have one and most do. But let’s face it, there are ample times when an easy to see, accurately drawn pencil line is preferable.

Now Mark Scribe Lines Or Pencil Lines With Woodpeckers All New Marking Gauge And Large Panel Marking Gauge.

When the challenge of adding pencil marking to a marking gauge came up, the design team didn’t think about how to strap a pencil on the tool. No, they figured out how to make their own, unique mechanical pencil as a fully integrated part of the tool. The pencil, which stores in the hollow opening in the end of the bar, is easily screwed in place when needed. To advance the pencil lead when in use, just turn the screw! The pencil is designed for commonly available .9mm leads.
These Marking Gauges Are Not Just A “Two Trick” Pony. There’s a lot more to these tools than dual purpose marking. As you know, most all other wheel marking gauges, both the better ones and the cheap copies, are pretty much the same. The start with a thin steel bar, attach a round, hardened steel cutting blade to one end, engrave scales and slide a relatively small, round fence on the bar with a locking knob. But Woodpeckers Marking Gauges offer soo much more!

More First Class Features. The robust fence sizes are 3½“ long for the 6” marking gauge and 6½” for the Panel Gauge. These larger reference surfaces provide greater control for more precise marking. Using Optional spacers and a second marking wheel, you can lay down dual scribe lines in 1/16” increments from ⅛” to ½”, all in one pass. The spacers, extra wheel marker and pencil are safely stored onboard in the “non-business” end of the tool.

The large, knurled locking knob features a built-in hex wrench to tighten or loosen the wheel cutter and spacers. The knurled knob also has a protective nylon tip to prevent marring the tool’s bar. And the bar has two, precision, laser-engraved Imperial 1/32” scales; one for the wheel marker and one for the pencil marker. And if you are a metric fan, both gauges are available with millimeter scales. The bar itself is ¾” diameter which gives you a solid grip on the tool. When the tool-steel marking wheel gets dull in one section, it’s easy to rotate it to a fresh, sharp section. And should the wheel get dull all around, it can be sharpened by honing the flat surface on a stone or diamond plate.

Ordering Options to Suit Your Needs. You can separately order the 6” Marking Gauge or 24” Panel Marking Gauge or their 150mm and 600mm metric models. Alternately, choose Woodpeckers Deluxe Set in either Imperial or Metric models and get both gauges at a savings.

Pre-Order Now, Don’t Delay!

Your credit card will be charged at the time you place the order.

When They’re Gone, They’re Gone! Like all their OneTIME Tools, the Marking Gauge and Panel Marking Gauge are only made-to-order in a one-time production run. They will make only enough tools to fill orders received by the June 12, 2017 deadline. Once orders are filled, the tool will be retired from our product line. Order yours today! Delivery is scheduled for November, 2017.

All Woodpeckers tools are manufactured using state-of-the-art CNC equipment in our shop located near Cleveland, Ohio.

What are our ONE-TIME TOOLS? They’re the tools that our partners at Woodpeckers plan to run once. Often these are tools we ourselves would like but can’t put in full production. The process is simple; they build a couple, take some pictures and open a 10-20 day window for others to jump on the production run. Once they know how many to make, they get them done and move on to something else.

By buying a One-Time Tool, you will own a limited run precisely machined tool that will make you the envy of all your woodworking friends, and you have a tool that will be used for generations. These tools are proudly made in the USA.
""
"

Videos

Top of Page