Sauers - White Oak 7/8" x 50' Edge Banding
Edge banding is all-natural wood veneer that has been pre-sanded, backed, and pre-glued. It is precoated with a heat-activated glue for a permanent bond. Just iron it on!Natural wood7/8" x...
- Natural wood
- 7/8" x 50'
- Permanent bond
Due to the nature of wood movement, shrinkage and expansion are possible. Please measure each piece carefully before starting any project.
Wood is a product of nature, and as such, no two pieces are alike to start with, while the same wood growing in different locales can vary greatly even though it is the exact same species.
Thin Stock. The thin stock is cut to size from quality, kiln-dried stock. Dimensions are +/- 1/8" of size listed.
Carving and Turning Blocks. Blocks are sawn to +/- ¼" of size listed.
Plywood. Sizes are nominal. Dimensions are +/- 1/8" of size listed.
Articles & Blogs
Lousy Edge Banding
I've been working on a large project that requires a lot of white oak edge banding. I originally purchased it from a dedicated edge banding company (in 250' rolls). I just needed a bit extra to complete the job so I figured I would save some money and buy this 50' roll. PROS None really. Though I guess it's a pro that you can buy it in 50' rolls. CONS 1. The color and grain of the edge banding isn't very good. The edge banding purchased from the other company exactly matched the color of the quarter sawn white oak plywood I was using. This stuff is much more red. 2. There are splices every 5-6 feet. The other edge banding had splices every 10' or so. So if you're edge banding anything longer than 5-6 feet, you're going to have a visible splice.