Frequently Bought Together

• Current product. Always included in the bundle total and cannot be deselected.

  

  Tormek

  Diamond Wheel - Extra Fine - 1200 Grit

  $462.00
• 

  Tormek

  10" Standard Stone SG-250

  +$305.00
  

  Tormek

  10" Standard Stone SG-250

  Item #11Q47 Model SG-250

  More Info

  Tormek’s Original Grindstone has evolved over the years to offer the best combination of efficient steel removal, smooth surface finish, and a long life. This stone efficiently cuts all types of tools and steel qualities including high-speed steel. The 250mm version is delivered with the T-8 model (SG-250) and the smaller, 200mm, with the T-3 model (SG-200). The unique composition of the stone, together with the Stone Grader (SP-650) gives you two different cutting actions in one stone. The stone grader polishes the surface of the grindstone from its normal 220-grit to a finish that works like a 1,000-grit stone. This is a great advantage, since you can do the fine sharpening with the same setting of the jig as used for the initial shaping of the tool. The original grindstone is the ideal choice when you want both efficient steel removal and fine finish in the same stone over a wide variety of materials, from carbon steel to high-speed steel.
  

  • Replacement 10" stone for Tormek T-7 and T-8 , 250mm
  • Stone efficiently cuts all types of tools and steel qualities including high-speed steel
  • Use with stone grader to increase normal 220-grit finish to 1,000 grit
• 

  Tormek

  Tormek Blackstone 10"

  +$345.00
  

  Tormek

  Tormek Blackstone 10"

  Item #149544 Model SB-250

  More Info

  Tormek Blackstone Silicon has been developed for shaping and sharpening high-speed steel and exotic alloyed steels. It can also touch up tungsten carbide. It does not offer faster steel removal on ordinary carbon steel. The combination of abrasive hardness, shape and grain size is optimized to work efficiently at the Tormek system’s low RPM. Its faster material removal is an advantage especially when shaping tools with a large bevel surface, where the grinding pressure is limited, for example, planer blades and woodturning skews. The 220-grit size is the same as the Tormek Original Grindstone, but can be altered to work like a 1,000-grit stone with the Tormek Stone Grader (SP-650). Thanks to its sharp and relatively small grains, the Blackstone removes hard steel efficiently, even at low grinding pressure. The Blackstone Silicon also offers exceptional wear resistance. It can even touch up tungsten carbide, where the tool already has an established shape.
  

  • Blackstone silicon grindstone for Tormek T-7
  • Developed for shaping and sharpening HSS and exotic alloyed steels
  • 220-grit size is the same as the Tormek Original Grindstone
  • Removes hard steel efficiently even at low grinding pressure
  • Blackstone silicon also offers exceptional wear resistance
• 

  Tormek

  10" Japanese Water Stone

  +$560.00
  

  Tormek

  10" Japanese Water Stone

  Item #149545 Model SJ-250

  More Info

  The Tormek 10" Japanese Waterstone Wheel is 4000 grit and delivers a mirror finish with hardly any visible marks. Since it is made to create the finest surface, it has a limited steel removal capacity and cannot be used for shaping a tool. It excels at sharpening hand tools like carving tools, knives, scissors, plane irons and wood chisels where a minimum of steel removal is needed and a superior surface finish is demanded. Its unique composition gives the stone an extremely long life. Since the surface left by the Japanese waterstone is so fine, we do not recommend honing afterwards on the leather honing wheel. Replacement wheel for Tormek T-7 and T-8.
  

  • 4000-grit waterstone wheel delivers mirror finish with minimal marks
  • Excels at sharpening hand tools like carving tools, knives, scissors, plane irons and wood chisels
  • Unique composition gives the stone an extremely long life
  • Honing afterwards on the leather honing wheel inot recommended
  • Replacement wheel for Tormek T-7 and T-8
• 

  Tormek

  T-8 Water Cooled Sharpening System

  +$1,066.00
  

  Tormek

  T-8 Water Cooled Sharpening System

  Item #161407 Model T-8 O

  More Info

  Some believe the T-7 is the best motorized sharpener out there – but we know the people at Tormek. They don’t sit around collecting awards and congratulating themselves on a job well done. Instead, they continually search for ways to make the best better, and we offer the T-8 as evidence.
  
  The Tormek® T-8 has a new Water Trough with a screw lift for easier fit that reduces water sloshing during removal and a magnetic scraper for efficient cleanup. They included the improved Square Edge Jig (SE-77), which has a movable side to permit fine setting adjustments that ensure 90° corners and the ability to create a chamfered shape on plane irons. But the real kicker is the new body. Instead of a two-part sheet metal/internal support body with mounted sleeves for the universal support, the T-8 has a precision one-piece fully cast body, with the sleeves cast into the body. This design provides unparalleled stability that improves both control and accuracy to make the T-8 the premier sharpening machine and a worthy successor to carry on Tormek inventor Torgny Jansson’s vision. Since Jansson founded Tormek (short for Torgny’s Mekaniska) in 1973, the Swedish company has continued to produce, refine and improve on the best solutions for sharpening edge tools.
  
  

  Features:
  

  
  

  • Fine setting adjustments that ensure 90° corners and the ability to create a chamfered shape on plane irons
  • Industrial AC motor is maintenance-free, shows minimal RPM loss under heavy load and is tested for a 25,000-hour service life
  • Included SE-77 Square Edge Jig accepts blades up to 3" in width
  • Truing and Dressing Tool with micro-adjustable screw feed trues the grindstone exactly round and flat
  • Dual knobs for smooth feed across the stone
  • Geared lift on water trough lets you raise the trough tightly up to wheel with the turn of a dial
  • Stainless steel hardware prevents rust and wear on bearings
  • Cast housing reduces vibration for improved accuracy
  • RKX18 rubber proprietary drive wheel ensures years of silent and reliable operation

  
  

  Specifications:
  

  • Product Dimensions: 12" H x 10-5/8" W x 10-5/8" D
  • Tormek Original Grindstone: Aluminum oxide - 2" x 10" - 90 RPM
  • Leather Honing Wheel Size: 1-1/4" x 8-5/8''

  
  

  What's Included:
  

  • (1) Tormek T-8 Sharpening System
  • (1) SE-77 Square Edge Jig
  • (1) TT-50 Truing and Dressing Tool
  • (1) SP-650 Stone Grader
  • (1) WM-200 AngleMaster
  • (1) PA-70 Honing Compound
  • (1) HB-10 Handbook

  
  

• 

  Tormek

  Anti-Corrosion Concentrate - 2 Pack

  +$63.00
  

  Tormek

  Anti-Corrosion Concentrate - 2 Pack

  Item #166808 Model ACC-150

  More Info

  This is the perfect accessory when sharpening with water whether you are using a Tormek Sharpening System, waterstones or diamond stones. Added to water, this concentrate changes the water from a potential corrosive enemy to a non-corrosive friend, leaving behind an anti-corrosive layer that helps protect your tools and your diamond stones from rust. Now the protection doesn’t last, so we recommend using products which afford not only longer term but better protection against corrosion. This would be especially true of carbon steel tools and knives.

  
  

  · Anti-corrosion concentrate

  · Use with water only

  · Use with waterstones, diamond stones and Tormek Systems

  
  
• 

  Tormek

  Diamond Wheel - Fine - 600 Grit

  +$462.00
  

  Tormek

  Diamond Wheel - Fine - 600 Grit

  Item #181463

  More Info

  Tormek® diamond grinding wheels always maintain the same shape. This means you can always have the same jig setting for a tool, so sharpening is quick and easy. You can also sharpen a completely flat bevel on the side of the diamond grinding wheels using the MB-100 Multi Base (#188266, sold separately). They’re extremely durable and sharpen all types of steel very efficiently. They can also sharpen ceramic knives. A bottle of Anti-Corrosion Concentrate is included.
  
  These diamond grinding wheels fit the Tormek T-8 and older models using a 250 mm wheel. They come in three different grits: coarse (360 grit), fine (600 grit) and extra-fine (1200 grit).
  
  

  Features:
  

  
  

  • Use to achieve razor-sharp edges on your tools and blades
  • For effective material removal and smooth surface finish
  • Sharpens all types of steel and ceramic
  • Exceptional wear resistance
  • Use the edge or side of wheel

  
  

  Specifications:

  
  

  • Grinding Wheel Diameter: 9-13/16" (250 mm)
  • Grinding Wheel Width: 1-15/16" (50 mm)
  • Arbor Size: Approximately 0.47" (12 mm)
  • Material: Steel, diamond coating
  • Grit: 600
  • Compatibility: Fits the Tormek T-8 and older models using a 9-7/8" (250 mm) wheel

  
  

  What's Included:

  
  

  • (1) Tormek DF-250 Diamond Wheel - Fine - 600 Grit
  • (1) 150 ml of ACC-150 Anti-Corrosion Concentrate

  
  
• 

  Tormek

  Diamond Wheel - Coarse - 360 Grit

  +$480.00
  

  Tormek

  Diamond Wheel - Coarse - 360 Grit

  Item #181464

  More Info

  Tormek® diamond grinding wheels always maintain the same shape. This means you can always have the same jig setting for a tool, so sharpening is quick and easy. You can also sharpen a completely flat bevel on the side of the diamond grinding wheels using the MB-100 Multi Base (#188266, sold separately). They’re extremely durable and sharpen all types of steel very efficiently. They can also sharpen ceramic knives. A bottle of Anti-Corrosion Concentrate is included.
  
  These diamond grinding wheels fit the Tormek T-8 and older models using a 250 mm wheel. They come in three different grits: coarse (360 grit), fine (600 grit) and extra-fine (1200 grit).
  
  

  Features:
  

  
  

  • Efficient sharpening and rapid repair of a dull or damaged edge
  • Ideal for rapid material removal
  • Sharpens all types of steel and ceramic
  • Exceptional wear resistance and constant shape
  • Use the edge or side of wheel

  
  

  Specifications:

  
  

  • Grinding Wheel Diameter: 9-13/16" (250 mm)
  • Grinding Wheel Width: 1-15/16" (50 mm)
  • Arbor Size: Approximately 0.47" (12 mm)
  • Material: Steel, diamond coating
  • Grit: 360
  • Compatibility: Fits the Tormek T-8 and older models using a 9-7/8" (250 mm) wheel

  
  

  What's Included:

  
  

  • (1) Tormek DC-250 Diamond Wheel - Coarse - 360 Grit
  • (1) 150 ml of ACC-150 Anti-Corrosion Concentrate