Bandsaw Blade - 111" x 3/4" x 2/3 TPI - Variable Positive Claw
Timber Wolf makes the world's only thin-kerf, low tension, silicon steel bandsaw blades that will outlast your old carbon steel blades by a mile! Your bandsaw will cut better and faster, with less wear on bearings, shafts and tires. Tooth angles and gullet symmetries, combined with a...
Timber Wolf makes the world's only thin-kerf, low tension, silicon steel bandsaw blades that will outlast your old carbon steel blades by a mile! Your bandsaw will cut better and faster, with less wear on bearings, shafts and tires. Tooth angles and gullet symmetries, combined with a unique set pattern, create a blade that is everything a wood cutting blade was meant to be. The VPC (Variable Positive Claw) is designed for straight-line resawing in small to large boards, kiln and air dry, up to 12” wide. The variable pitch, positive claw, tooth design reduces resonance throughout the blade by using different size teeth, which produces a very clean finish almost polishing the wood as it cuts. The blade is .025” thick with an overall kerf of .049” and incorporates the unique geometry of our PC (Postive Claw) design. The PC design has 60% of the feed speed capabilities of a hook tooth, while at the same time giving you the great finish of a skip tooth. The depth and roundness of the gullet increases sawdust removal and cutting speed while the milled teeth help to reduce consumption of horsepower.
- Ideal for resawing thick stock
- High silicon, low carbide steel
- Runs cooler and lasts longer
- Ideal for thin stock wood
- Runs under low tension which requires less horsepower
- Thin kerf
- Blade Length: 111"
- Blade Width: 3/4"
- Blade Thickness: 0.025" thin-kerf
- Teeth Per Inch: 2/3 TPI
- Tooth Design: Variable Positive Claw
- Kerf: 0.049"
- Tooth Hook Angle: 6.5°
- Tooth Set Pattern: 5 Raker Set
- Radius of Cut: 5-7/16"
- Depth of Cut Range (Hardwood): 3” - 12"
- Depth of Cut Range (Softwood): 3” - 10"
- (1) Timber Wolf - Bandsaw Blade - 111" x 3/4" x 2/3 TPI - Variable Positive Claw
Articles & Blogs
Decent blade, bit pricey.
Blade saws straight. I used it on wet oak 4"x6"x48" timbers. Resawed some to 1"x6"s and most to 1"x4" when the blade got duller. After about 100 bf the blade is off tracking because one set is sharper than the other so had to switch to a 5/8 to finish. I will take it in and see if it can sharpened. If you use it for small projects I think it would be fine. One thing for sure is the blade will eat!! Not sure I would buy it again due to the price and I only got marginally better performance than a less expensive blade that I could have bought two of for the same money. These blades also require less tension so the can be a bit of challenge to get set up. I have a gauge on my saw and found the setting for a 5/8" blade to work well on the 3/4" one.
smoothest cut I had so far resawing still playing with the tenson adjustments for the blade
Timber WolfItem 160957
Timber WolfItem 140184
Timber WolfItem 144705
Timber WolfItem 165995
Timber WolfItem 165997